iOptron iEQ30 Pro Uputstvo za upotrebu za ekvatorijalni nosač

Uvod

This manual provides detailed instructions for the setup, operation, and maintenance of your iOptron iEQ30 Pro equatorial mount. The iEQ30 Pro is a high-performance, portable equatorial mount designed for astrophotography and astronomical observation, featuring advanced GoTo technology and precise tracking capabilities. This specific product includes the mount and a hard case, but does not include a tripod or counterweight.

Figure 1: The iOptron iEQ30 Pro equatorial mount shown with its hand controller. This image illustrates the main unit, counterweight shaft, and the hand controller connected to the mount, resting on a tripod (tripod not included with this specific product).

Uputstva za postavljanje

1. Raspakivanje: Carefully remove the iEQ30 Pro mount from its hard case. Inspect all components for any signs of damage.
2. Montaža: Attach the iEQ30 Pro mount head to a suitable tripod (not included). Ensure the mount is securely fastened to prevent movement during operation.
3. Counterweight Shaft: Install the stainless steel counterweight shaft (if not already attached). Note that counterweights are not included with this product and must be acquired separately based on your telescope's weight.
4. Priključak za napajanje: Connect the AC adaptor or 12V DC car charger to the mount's power input. Ensure a stable power source.
5. ručni kontroler: Connect the GoToNova hand controller to the designated port on the mount.
6. GPS aktivacija: The mount features a built-in 32-channel GPS. Allow a few minutes for the GPS to acquire a signal and set the correct time and location automatically.
7. Polarno poravnanje: Utilize the AccuAlign^TM polar scope with dark-field illumination and the Quick Polar Alignment procedure for fast and accurate polar alignment. Refer to the detailed polar alignment guide in the full user manual for precise steps.

Operating the iEQ30 Pro Mount

• GoTo System: The Advanced GOTONOVA GoTo Technology allows for automatic pointing to celestial objects. Use the hand controller to select objects from the database.
• Slewing and Tracking: The mount offers ultra-quiet slewing and tracking with a maximum slew speed of 6 degrees per second (1440X). The high gear ratio (RA 180 teeth | DEC 144 teeth) and 1.8-degree stepper motor with 128 microsteps ensure precise movement.
• Permanent Periodic Error Correction (PPEC): Engage the PPEC feature to minimize tracking errors over long exposures, crucial for astrophotography.
• Autoguiding: Connect an autoguider via the ST-4 autoguiding port for enhanced tracking accuracy during long-exposure imaging.
• Firmware Updates and ASCOM Control: The RS232 port allows for mount firmware upgrades and ASCOM control, enabling integration with various astronomy software.
• Hand Controller Heating: The hand controller includes a heating mechanism to ensure reliable operation in cold environments.
• Power Interruption Recovery: The mount is equipped with a power interruption recovery feature, allowing it to resume operation after a brief power loss.

Održavanje

To ensure the longevity and optimal performance of your iEQ30 Pro mount, follow these general maintenance guidelines:

• čišćenje: Keep the mount clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents.
• Skladištenje: When not in use, store the mount in its hard case in a dry, temperature-controlled environment.
• Radna temperatura: The mount is designed to operate in temperatures down to -20°C. For optimal performance and to prevent damage, avoid operating or storing the mount outside its specified temperature range.
• Upravljanje kablovima: Ensure all cables are properly routed and secured to prevent snagging or damage during slewing.

Rješavanje problema

If you encounter issues with your iEQ30 Pro mount, consider the following common troubleshooting steps:

• Nema napajanja:
  • Verify that the power adapter is securely connected to both the mount and a working power outlet.
  • Check the power source (AC outlet or 12V DC car charger) for functionality.
• Netačnost GoTo-a:
  • Ensure accurate polar alignment. Re-perform the Quick Polar Alignment procedure if necessary.
  • Confirm that the GPS has acquired a signal and the time/location settings are correct.
  • Perform a star alignment procedure using the hand controller.
• Problemi s praćenjem:
  • Check for proper balance of your telescope on the mount. Imbalance can lead to tracking errors.
  • Ensure all clutches are engaged.
  • Verify that PPEC is enabled if desired for long-exposure astrophotography.
• Ručni kontroler ne reaguje:
  • Ensure the hand controller cable is securely connected to the mount.
  • Restart the mount by cycling the power.
• Ažuriranja firmvera: If experiencing persistent software-related issues, check the iOptron website for the latest firmware updates and instructions on how to apply them via the RS232 port.

Tehničke specifikacije

Informacije o garanciji

The iOptron iEQ30 Pro mount comes with a one-year iOptron standard warranty. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official iOptron warranty policy or contact iOptron customer service.

Korisnička podrška

For further assistance, technical support, or inquiries regarding your iOptron iEQ30 Pro mount, please visit the official iOptron webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Pobrinite se da imate model proizvoda i serijski broj pri ruci kada tražite podršku.

Manufacturer: iOptron