ThinkNode LOGO

Think Node M6 Meshtastic Device

Uputstvo za upotrebu

Informacije o sigurnosti proizvoda

Ikona upozorenja Upozorenje na požar: Observe safety instructions and compliant operation, otherwise it may cause fire, electric shock or other injuries.
Ikona upozorenja Upozorenje o gušenju: The product or gadgets inside the package present a risk of causing or contributing to asphyxiation.

The product has some waterproof function and is suitable for outdoor use. However, the product does not support underwater use, in order to prevent electric shock exposure:

  • Do not immerse the solar panel underwater;
  • Do not spill food or drink on the solar panel;
  • Do not put oil or corrosive liquid in contact with the solar panel;
  • Do not place the solar panel in an extremely humid environment,
  • Do not use external heating equipment to dry the solar panel;
  • Do not use a high-pressure water gun to rinse the solar panel:
  • Do not use or touch the solar panel in lightning or thunderstorms;
  • If your solar panel is damaged or cracked, stop using it immediately.
  • Please use the accessories supplied with the product or those designed specifically for this product. The use of other third-party accessories may affect the performance of the device.
  • If you want to use third-party accessories, please be sure to read all product warnings before using them.

For information on compatibility of your device, please consult our information channels or contact our specialized technicians.

Priprema za ugradnju

Please refer to the following recommendations before installation, so that the solar panels can work more efficiently.

a: Choose a suitable orientation for installation.
If you are in the Northern Hemisphere, install the solar panels facing south,

ThinkNode M6 Meshtastic Device - Fig 1

If you are in the Southern Hemisphere, install the solar panel facing north.

b: Do not install the solar panels in an environment where there are objects covering the solar panels, so as not to affect the conversion of the solar panels.

ThinkNode M6 Meshtastic Device - Fig 3

Ugradnja solarnih panela

a: Bracket fixing
Select the appropriate tool to securely fasten the bracket to the wall at the desired installation location.

ThinkNode M6 Meshtastic Device - Fig 4

b: Mating solar panels to racking.

ThinkNode M6 Meshtastic Device - Fig 5

Opis funkcije

Dugme Opis

Ime Metod rada Funkcija
Funkcijska tipka Dvaput kliknite Update node/device location information
Triput kliknite Turn GPS on/off
Press and hold for 5 seconds. Uključite/isključite uređaj
Reset dugme Jednim klikom Reset the device; a restart is required

Opis lampice indikatora

Ime Status Opis Blink Frequency
PWR (crveno) Power On The red light stays on for 10 seconds.
Power Off It blinks 5 times. Fast blink(1 Hz).
Indikator punjenja When the device is charging via USB or solar power (when exposed to light), the indicator light stays on.
Upozorenje o niskoj bateriji A low battery warning is triggered when the power is s 3.3V. Slow blink (0.5 Hz).
DATA (Blue) Sending /Receiving Data When the device is sending or receiving LoRa data, it blinks twice. Fast blink (1 Hz).

Specifikacije proizvoda

Module: nRFLR1262
Bluetooth: Bluetooth Low Energy/Bluetooth 5.4
LoRa: US 915MHz/EU 868MHz (External Antenna)
Tip baterije: 18650 Li-ion baterija
Kapacitet baterije: 7000 mAh
Dimensions: 210 x 156 x 42mm (excluding antenna & bracket)
Neto težina: 533.1 g
Stepen zaštite: IP65
Radna temperatura: -20°C do +60°C
Temperatura skladištenja: -30°C do +70°C
Main Board Input: 5V1A
Solar Panel Output: Rated power 6W output

Lista pakovanja

Solar Panel (M6) x 1
Zagrada x 1
Paket vijaka 1
USB-A to USB-C × 1
LoRa antena x 1
GPS Antenna x 1
Korisnički priručnik x 1

Često postavljana pitanja

1: Why do solar panels charge slower and slower after a period of normal use?

-Solar panels are suitable for outdoor installation, after al period of time the surface of solar panels may be covered with dust, debris, etc. will affect the efficiency of solar energy conversion, Please clean the surface of the solar panel regularly.

2: Are solar panel products waterproof?

-The equipment is suitable for outdoor, is with certain waterproof function, but not suitable for use underwater, also can not use high-pressure water gun rinse equipment, avoid some corrosive liquid or material touch,

3: What is the purpose of these two sensor interfaces?

-Two SP11 model sensor interfaces are reserved, allowing users to connect external sensors for UART and IIC sensor communication.

Napomena: After using the sensor interface and USB interface, please remember to cover the waterproof cap to prevent water from entering the device and affecting its use.

Korisnička podrška

Ako imate bilo kakvih pitanja, korisnička podrška je uvijek na raspolaganju.
Maxxima MCL 710600D LED stropno svjetlo sa senzorom pokreta - ikona 4 info@elecrow.com
Maxxima MCL 710600D LED stropno svjetlo sa senzorom pokreta - ikona 4 techsupport@elecrow.com
Za više tehničkih detalja, posjetite relevantne webstranica.

FCC UPOZORENJE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation,
Sve promjene ili modifikacije koje nije izričito odobrila strana odgovorna za usklađenost mogu poništiti korisnikovo ovlaštenje da koristi opremu.
NAPOMENA: Ova oprema je testirana i utvrđeno je da je u skladu s ograničenjima za digitalne uređaje klase B, u skladu s dijelom 15 FCC pravila.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Preusmjerite ili premjestite prijemnu antenu.

  • Povećajte razmak između opreme i prijemnika.
  • Povežite opremu u utičnicu na strujnom kolu različitom od onog na koji je priključen prijemnik.
  • Za pomoć se obratite prodavaču ili iskusnom radio/TV tehničaru.
  • To maintain compliance with FCC’s RF Exposure guidelines. This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

ThinkNode LOGO 2ThinkNode M6 Meshtastic Device - Symbol 1

Manufacturer: Elecrow
Proizvedeno u Kini

Dokumenti / Resursi

ThinkNode M6 Meshtastic Device [pdf] Korisnički priručnik
M6, M6 Meshtastic Device, Meshtastic Device, Device

Reference

Ostavite komentar

Vaša email adresa neće biti objavljena. Obavezna polja su označena *