SMARTRISE C4 Link 2 Programmer

Gotovoview

Ovaj dokument pruža detaljne upute za preuzimanje, instaliranje i korištenje Link2 programatora s C4 kontrolerima. Objašnjava kako učitati softver na C4 kontroler pomoću Link2 programatora.

Required Tools for Software Programming

Za programiranje softvera potrebni su sljedeći alati:

1.  Laptop sa operativnim sistemom baziranim na Windowsu.
2. Link2 programer.
3. Controller software: The original controller software is stored on a flash drive inside the white job binder. If the flash drive is missing or contains outdated prints and software, Smartrise can provide a weblink za pristup najnovijem softveru i ispisima.

Application Download Instructions

Da biste učitali softver na Smartrise kontroler, potrebno je preuzeti aplikaciju za programiranje na laptop. Ova aplikacija je dostupna na fleš disku. Slijedite ove korake za preuzimanje aplikacije C4 Link2 Programmer:

1. Otvorite fleš disk.
2. Navigate to (5) – Smartrise Programs and open the folder
3. Pronađite i otvorite mapu C4 Programmer.
4. Download and run both applications on the laptop. Some laptops may have firewalls that prevent applications from downloading. For assistance, contact the system administrator.
5. Once completed, the two applications should appear on the desktop.
   NOTE: MCUXpresso does not need to be opened, only installed on the laptop.

Software Loading Instructions

Da bi se osigurala ispravna funkcionalnost, softver kontrolera mora se učitati na Smartrise kontroler pomoću Link2 programatora. Slijedite korake u nastavku da biste dovršili proces:

1. Connect the Link2 Programmer to the laptop via the USB port.
2. Open the C4 Link2 Programmer by double-clicking its icon. The application will automatically update to the latest version if connected to the internet. Ensure the application is up to date before proceeding.
3. Pretražite softver kontrolera:
   1. Open (1) – Controller Software.
   2. Odaberite mapu s nazivom zadatka.
   3. Odaberite automobil za koji želite učitati softver.
   4. Kliknite na dugme Odaberi fasciklu na dnu prozora.
   5. Select the processor to update using the dropdown menu. Processors can be updated in any order:
      • GOSPODIN A: GOSPODIN MCUA
      • GOSPODIN B: GOSPODIN MCUB
      • SRU A: CT i COP MCUA
      • SRU B: CT and COP MCUB
      • Podizna ploča/Proširenje: Podizna ploča/Ploča za proširenje

Priključci za procesor se mogu naći na matičnoj ploči.

Start the software loading process by clicking the Start button.

Važno: Prilikom programiranja MR SRU-a, to može uticati na druge automobile u grupi. Da biste to spriječili, odspojite grupne terminale na ploči.

A new window will appear, and the software download will begin. Once complete, a confirmation message will be displayed.

NAPOMENA: Ako preuzimanje softvera ne uspije, pokušajte sljedeće:

1. Retry the process.
2. Koristite drugi USB port.
3. Power cycle the controller.
4. Ensure the Link2 Programmer is properly connected.
5. Ponovo pokrenite laptop.
6. Try a different Link2 Programmer.
7. Use a different laptop.
8. Contact Smartrise for assistance.

• Click Edit to continue loading software for the remaining processors and follow the previous steps.
• Once all software uploads are complete, reconnect the group terminals and power cycle the controller.
• Verify the software version under Main Menu | About | Vers.
• Pomaknite se dolje do view sve opcije i potvrdite da je prikazana očekivana verzija.

FAQ

Q: What should I do if I encounter errors during software loading?

A: If you encounter errors during software loading, ensure that all connections are secure and try restarting the process. If issues persist, contact Smartrise support for assistance.

Dokumenti / Resursi

SMARTRISE C4 Link 2 Programmer [pdfUpute C4 Link 2 Programmer, C4, Link 2 Programmer, Programmer

Reference

• Uputstvo za upotrebu