Sage Christmas Hat Pattern

Specifikacije

• igle: 1 pair size 4mm (UK 8/US 6) knitting needles
• predivo: DK/8ply wool – 2 x 50gm balls in your chosen colors (A & B)
• Dodatni materijali: 28 small beads or buttons, 1 large-eyed darning needle

Upute za upotrebu proizvoda

I-Cord Cast On

1. Cast on 3 stitches using any preferred method.
2. Knit 3 stitches and slip them back onto the left needle.
3. Repeat knitting these 3 stitches until you have 111 repeats.
4. Pick up and knit 111 stitches along the I-cord edge, resulting in 114 stitches on the needle.

Christmas Hat Pattern

1. Follow the specified rows for knitting and purling using colors A and B as indicated.
2. Begin decreasing with the right side of the work facing you, according to the provided instructions.

Finishing

1. Complete the final rows and decrease as outlined in the pattern.
2. Sew the seam together using a ladder stitch for a neat finish.

Trebaće ti

• 1 pair size 4mm (UK 8/US 6) knitting needles
• DK/8ply wool: 2 x 50gm balls in your chosen colours
• I used red and white—designated as A & B in the pattern
• 28 small beads or buttons, optional
• 1 large-eyed darning needle
• For the pom pom, cut 2 circles of cardboard 6cm in diameter, and then cut a 2cm circle in the centre –there are lots of YouTube videos if you are unsure.

Skraćenice

• K – Knit
• P – Purl
• St(s) – Stitch(es)
• St st – Stocking stitch
• K2Tog – Knit 2 stitches together
• P2Tog – Purl 2 šava zajedno
• This pattern uses an I-cord cast-on method. If you are unfamiliar or unsure, there are many ‘how-to’ videos on YouTube you can knit along with.
• This pattern is also knit flat rather than in the round, and a pair of single-pointed needles should be used.

Christmas Hat Pattern for the Barista Express

Let’s begin the I-cord cast on for the Christmas hat

1. Cast on 3 stitches—any cast-on method you prefer.
2. Knit 3 stitches, then slip these 3 stitches back onto the left needle.
3. Knit these 3 stitches again, repeating until you have 111 repeats.
4. Pick up and knit 111 stitches along the I-cord edge. Knit through both legs of the stitches as you go. You will finish with 114 stitches on your needle.

Now for the rest of the Christmas hat

• Red 1. A-purl
• Red 2. A-knit
• Red 3. A-purl
• Red 4. (A-K3, B-K1) to last 2 sts, A-K2
• Red 5. A-P2, (A-P1, B-P1) repeat to end
• Red 6. Repeat Row 4
• Red 7. A-purl
• Red 8. A-knit
• Red 9. A-purl

Dekretasing begins with the right side of the work facing you

• Starting with A, and alternating A/B (see grid)
• Row 10. K1, (K2Tog, K4) to last 5 sts, K2Tog K3 [95 stitches on needle]
• Row 11. Purl
• Row 12. Knit
• Row 13. Purl

mreža:

• Using A only for the next 4 rows,
• Row 14. K1, (K2Tog, K3) to last 4 sts, K2Tog K2 [76 stitches on needle]
• Row 15. Purl
• Alternating A and B for the next 4 rows with colours stacked (see grid)
• Row 18. K1, (K2tog, K2) to last 3 sts, K2Tog K1 [57 stitches on needle]
• Row 19. Purl
• Row 20. Knit
• Row 21. Purl

mreža:

• Row 22. Alternating A and B, K1, (K2Tog, K1) to end [38 stitches on needle]
• Row 23. Purl A/B to end
• Row 24. B only-K1, K2Tog to last st, K1 [20 stitches on needle]
• Row 25. B only-P2Tog to end [10 stitches on needle]
• Row 26. Break off yarn, leaving a long tail, and thread the wool through the remaining stitches and pull tight.
• Sew the seam together, and ‘ladder stitch’ gives a nice finish.

Dekretasing for larger bean hoppers

• The steps above are for a beanie to fit the Barista Express (BES870).
• If you have a coffee machine with a larger hopper than the Barista Express, like the Barista Touch Impress (BES881) or the Oracle Jet (BES985), you will need an extra 2cm in diameter for the beanie to fit properly. Please follow the steps below instead.
• When doing the I-cord cast on, you add 8 more stitches—leaving you with a total of 122 stitches on the needle.
• Red 1. A-purl
• Red 2. A-knit
• Red 3. A-purl
• Red 4. (A-K3, B-K1) repeat to end
• Red 5. A-P2, (A-P1, B-P1) repeat to end
• Red 6. Repeat Row 4
• Red 7. A-purl
• Red 8. A-knit
• Red 9. A-purl
• Počinje with A, and alternating A/B (see the first grid for the smaller size)
• Red 10. K1, (K2Tog, K4) K1 [102 stitches on needle]
• Red 11. Purl
• Red 12. Knit
• Red 13. Purl
• Using A only for next 4 rows
• Red 14. K1, (K2Tog, K3) K1 [82 stitches on needle]
• Red 15. Purl
• Red 16. Knit (Alternatively, you can add a bead every other stitch in this row. Otherwise, you can sew them on at the end.)
• Red 17. Purl
• Naizmjenično A and B for the next 4 rows with colours stacked (see second grid)
• Red 18. K1 (K2Tog, K2) K1 [62 stitches on needle]
• Red 19. Purl
• Red 20. Knit
• Red 21. Purl
• Red 22. Alternating A and B, K1 (K2Tog, K1) K1 [42 stitches on needle]
• Red 23. Purl A/B to end
• Red 24. B only-K1, K2Tog until last stitch K1 [22 stitches on needle]
• Red 25. B only-P2Tog until end [11 stitches]
• Red 26. Break off yarn, leaving a long tail, and thread the wool through the remaining stitches and pull tight.
• Sew the seam together, and ‘ladder stitch’ gives a nice finish.
• Make your pom pom—it’s optional. You can have a single colour or multi-coloured and sewn on.
• Sew on your beads or buttons at the end of the points of the centre snowflake—that’s optional too. Pop it in the hopper to dress your espresso machine. Hope you had fun!

FAQ

What should I do if I have a coffee machine with a larger hopper than the Barista Express?

If you have a coffee machine with a larger hopper, such as the Barista Touch Impress BES881 or Oracle Jet BES985, you will need to add an extra 2cm in diameter for the beanie to fit properly. Follow the modified steps provided in the manual for the larger bean hoppers.

Dokumenti / Resursi

Sage Christmas Hat Pattern [pdf] Uputstvo za upotrebu DAG6bT7JbKI, BAGEmK1odbo, Christmas Hat Pattern, Hat Pattern

Reference

• Uputstvo za upotrebu