MAKEID L1-A QUICK
UPUTSTVO ZA UPOTREBU

L1-A Mašina za izradu etiketa

Kako dobiti APP?
Scan the QR code below to download the APP directly, or you may go to Google/Apple APP Store to search for “MAKEID-Life” to download the APP.

https://www.jingjingfun.com/app-international/

PRAVA: MAKEID is the owner of this manual. To share, translate or modify the contents without the permission of MAKEID is prohibited.
ŽIGOVI: The trademark of MAKEID has been registered in the U.S, Europe and elsewhere, and all other trademarks are the properties of their respective owners.

Uvod u proizvod

1. Dugme za rezanje
2. Dugme za otključavanje
3. Indikator
4. Uključivanje/isključivanje
5. Printing Line
6. Cutter ( SHARP! Be Careful when Use)
7. Tip-C

Savjet: Long press the Power On/Off button to shut down the printer, or it automatically shuts down if left for 30 minutes.
★Status of indicator
GREEN: fully charged/ printing/ paper feeding/standby/ ready YELLOW: charging
CRVENA: poklopac otvoren/naljepnice nepravilno postavljene
★Charing instruction
Ulaz tipa C
5V 2A input for charging. The product
does not come with a power adapter, a standard Type-C charging plug is sufficient.
BATERIJA: 7.4V/500mAh,3.7V/1000mAh, 1.5 hours to be fully charged.
Please charge at intervals of 3 months for long periods of non-use so that the lithium battery does not wear out naturally over time.
How to install the labels?
Savjet: This printer can only print on 12mm/16mm label paper. Please use the  official Makeid label, otherwise it might damage the printer or cause poor printing.
Step 1: When using a new label, pull the transparent label lead all the way out to the horizontal line mark. Step 2: Close the top cover and press the cutter to cut, then edit and print in the APP. Savjet: Red indicator means incorrect labels installation
Kako povezati telefon sa štampačem?
Korak 1:
Download the APP, and turn on the Bluetooth.
Korak 2:
Otvorite APP i složite se s dozvolama. (Da bi se zajamčila veza, nema rizika po privatnost)
Korak 3:
Select “L1-A” for first-time users.
Korak 4:
Click on the right top of the APP to search the device, and then click to connect.How to correctly print the label?

Continuous label printing

1. Choose the Continuous Label on the APP home page
2. Kliknite”“to edit the text.
   Kliknite” “to change the font.
3. Kliknite” “to add more icons.
4. Kliknite” t” to print. You may select multiple copies for batch printing.
5. When the printing is finished, press the cutting button to cut the label.
6. You may also click” template. “to use the

Gapped label printing

1. Choose the gapped Label on the APP home page.(Make sure interval label paper has been put in the printer beforehand.)
2. Select the corresponding label size (Tip: Wrong size may result in misplaced printing )
3. Click” A “to edit the text.
4. Click” Print “to print. Select batch printing.

Since the first gapped label identifies the label position and may not print completed, from the second gapped label on, it can be printed normally, which is a normal situation. (When gapped label is replaced or the printer cover is opened, the label position will be re-identified.)
Kako koristiti etiketu?
Step 1: Remove the back paper from the back of the label.Step 2: Stick the label onto any dry and smooth objects.
Uobičajeno rješavanje problema:

1. Nije moguće povezati se sa štampačem sa telefonom.
   a: Make sure the printer is powered on and the Bluetooth has also been turned on.
   b: The APP agreed to all permissions.
   c: Power off the printer, uninstall and re-install the APP, and agree to all permissions to connect again
2. Crveni indikator štampača treperi.
   a: If the label is correctly installed. (For new labels, the transparent leading tape needs to be removed before using. Then, pull the label to the line mark.).
   b: please make sure the printer’s top cover is securely locked.
3. Nenormalan ispisani tekst ili uzorak
   a: Restart the printer. Logout the APP and try again.
   b: Restart the printer. Uninstall and re-install the APP and try again.
   Za bilo kakvu dodatnu pomoć, kontaktirajte nas putem e-pošte Jryx@jingjingfun.com
4. Zamućeno štampanje
   a: Using under low temperature situation may result in blurred printing. Recom-mended temperature range: 10°C-35°C.
   b: Try to adjust to the highest print density by clicking “Printer Density” in the Device Management Setting.
   c: The print head may be dirty, please wipe the print head gently with alcohol, and wait for 2 minutes before use it again.

MAKEID
Dve godine garancije
MAKEID product is covered by a 2-year warranty period from the date of purchase. During the warranty period, MAKEID shall repair or replace your product free of charge due to quality and functionality problems.

1. Da biste popravili ili zamijenili svoj proizvod u garantnom roku, morate navesti broj narudžbe, svoje kontakt podatke i podatke za dostavu, koji uključuju vaše ime, broj telefona, punu adresu, broj ulice, poštanski broj, grad, podatke o državi.
2. The product must be used strictly in accordance with the operational manual provided. MAKEID shall not be liable for any problems caused by accident, misuse, modification or negligence.
3. MAKEID shall not be liable for any consequential loss, damage or expense arising from the use of its machines or accessories, nor shall it be liable for death or serious injury caused by such products.
4. Products returned to MAKEID must be in full packaging. MAKEID will not hold any responsibilities for products lost or damaged by customers during shipping.
5. MAKEID label printers are exclusively designed for use of MAKEID label paper. This warranty does not cover any failure or damage caused by the use of any third party label papers.
6. Ova garancija ne utiče na vaša zakonska prava kao potrošača.

Warranty card-Garantiekarte

• Korisničko ime
• broj telefona
• Datum kupovine
• Vrsta proizvoda
• serijski broj
• outgoing inspection
• up to standard-bis

U okolini sa rezultatima testa elektrostatičkog pražnjenja sampmože se isključiti, ali ga korisnik može vratiti na normalan rad nakon testiranja.
This device complies withpart 15 of the FCC Rules.
Rad je podložan sljedeća dva uslova:
(1) Ovaj uređaj ne smije uzrokovati štetne smetnje i (2) Ovaj uređaj mora prihvatiti sve primljene smetnje, uključujući smetnje koje mogu uzrokovati neželjeni rad.
NAPOMENA: Ova oprema je testirana i utvrđeno je da je u skladu s ograničenjima za digitalne uređaje klase B, u skladu s dijelom 15 FCC pravila. Ova ograničenja su dizajnirana da pruže razumnu zaštitu od štetnih smetnji u stambenoj instalaciji. Ovo
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followingme- sures:

• Preusmjerite ili premjestite prijemnu antenu.
• lncrease the separation between the equipment andreceiver.
• Povežite opremu u utičnicu na strujnom kolu različitom od onog na koji je priključen prijemnik.
• Za pomoć se obratite prodavaču ili iskusnom radio/TV tehničaru.

FCC izjava o izloženosti zračenju
Uređaj je procijenjen da ispunjava opšte zahtjeve za izlaganje RF zračenju. Uređaj se može koristiti u prijenosnom stanju izloženosti bez ograničenja.
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’ s authority to operate the equipment.

Chongqing Jingranyouxu Technology Co., Ltd.
Web: WWW.MAKEID.COM

Dokumenti / Resursi

MAKEiD L1-A Label Maker Machine [pdfUputstvo za upotrebu L1-A Label Maker Machine, L1-A, Label Maker Machine, Maker Machine

Reference

• Uputstvo za upotrebu