LTECH KMS1 Switch Module

Uvod u proizvod

• Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
• Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
• Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
• Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
• Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.

Technical Specs

Model	KMS1
Bežični tip	Matter over Thread
Promijeni kanal	1CH
operativni voltage	100-240V~, 50/60Hz
Max. load parameters of the relay	Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac
Prenaponska struja releja	70A@10ms
Radna temperatura	-25°C~50°C
Veličina proizvoda	L45׊45.5×V20.5(mm)
Težina proizvoda	38g
Standardi	UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022

Slike proizvoda

DIMENZIJA

• Jedinica: mm
• Dimenzije: 45 x 45.5 x 20.5

Dijagram ožičenja

1.  Mechanical Switch Wiring Diagram
   Includes connections for load, line (L), and neutral (N).
2.  Push Switch Wiring Diagram
   Includes connections for load, line (L), and neutral (N).

Koristite NFC Lighting APP
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.

Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.

Uredi parametre
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.

Add to Matter Platform Instructions

1. This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
2. To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.

Kompatibilni modeli

Setup Example

• This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
• For iPhone models 15 and above, no Matter hub is required; they can be added directly.

Dodaj dodatnu opremu

• Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
• *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.

Upravljački uređaj
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.

Napredne funkcije

Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.

Vratite tvorničke postavke

Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.

Resetiranje napajanja
U slučaju napajanjatage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.

Pažnja

• Instalaciju i puštanje u rad proizvoda treba obaviti kvalifikovani stručnjak.
• Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
• Dobro odvođenje topline produžit će radni vijek proizvoda. Osigurajte dobru ventilaciju.
• Molimo provjerite da li radni voltagKorišteno je u skladu sa zahtjevima parametara proizvoda.
• Prečnik žice koja se koristi mora biti u stanju da optereti rasvetna tela koja povezujete i da obezbedi čvrsto ožičenje.
• Prije nego što uključite proizvode, uvjerite se da su sva ožičenja ispravna u slučaju neispravne veze koja uzrokuje oštećenje rasvjetnih tijela.
• Ako dođe do kvara, nemojte pokušavati sami popraviti proizvode. Ako imate bilo kakvih pitanja, obratite se svojim dobavljačima.

Ugovor o garanciji

Garantni rok od datuma isporuke: 2 godina. Besplatne usluge popravke ili zamjene za probleme s kvalitetom pružaju se u garantnom roku.

Izuzeci iz garancije

• Van garantnih rokova.
• Sva umjetna oštećenja uzrokovana visokim volumenomtage, preopterećenja ili nepravilnih operacija.
• Proizvodi sa teškim fizičkim oštećenjima.
• Šteta uzrokovana prirodnim katastrofama i višom silom.

1. Garantne naljepnice i bar kodovi su oštećeni.
2. No contract signed by our company.

Dokumenti / Resursi

LTECH KMS1 Switch Module [pdf] Uputstvo za upotrebu KMS1 Switch Module, KMS1, Switch Module, Module

Reference

• Uputstvo za upotrebu