Keeson RC302F Remote Control User Manual

Keeson RC302F Remote Control

Specifikacije

• Naziv proizvoda: DALJINSKO UPRAVLJANJE
• Model: RC302F
• Unos: 3 x Battery AAA 1.5V
• Proizvođač: Keeson Technology Corporation Limited
• Zemlja proizvodnje: Kina

Uputstva za upotrebu

Osnovna podešavanja

• Pažnja: Press and hold the ‘HEAD UP’ button. The head actuator will move out. Release to stop.
• Glava prema dolje: Press and hold the ‘HEAD DOWN’ button. The head actuator will move in. Release to stop.
• Noga gore: Press and hold the ‘FOOT UP’ button. The foot actuator will move out. Release to stop.
• Noga dolje: Press and hold the ‘FOOT DOWN’ button. The foot actuator will move in. Release to stop.
• Lumbar Up: Press and hold the ‘LUMBAR UP’ button. The lumbar actuator will move out. Release to stop.
• Lumbar Down: Press and hold the ‘LUMBAR DOWN’ button. The lumbar actuator will move in. Release to stop.
• Tilt Up: Press and hold the ‘TILT UP’ button. The head tilt actuator will move out. Release to stop.
• Tilt Down: Press and hold the ‘TILT DOWN’ button. The head tilt actuator will move in. Release to stop.

Posebne funkcije

• UBB (Underbed Light): Click the ‘UBB’ button to turn the underbed light on or off.
• Massage Head +: Click the ‘MASSAGE HEAD +’ button to cycle through head massage intensity levels (0-1-2-3).
• Massage Head -: Click the ‘MASSAGE HEAD -‘ button to gradually decrease head massage intensity (3 levels).
• Massage Foot +: Click the ‘MASSAGE FOOT +’ button to cycle through foot massage intensity levels (0-1-2-3).
• Massage Foot -: Click the ‘MASSAGE FOOT -‘ button to gradually decrease foot massage intensity (3 levels).
• Tajmer za masažu: If massage motors are active, click this button to switch the massage time. Setting the timer to ‘0’ will turn off the massage. This button is inactive if massage motors are off.
• Stan: Click the ‘FLAT’ button to return the bed to a flat position. The process will stop if any other button is clicked during movement.
• Zero G (ZG): Click the ‘ZG’ button to move the bed to the Zero Gravity position. The movement will stop if any other button is clicked during the process.
• Memory Position: Click the ‘MEMORY POSITION’ button to move the bed actuators to a pre-set memory position.

Gotovoview

1. Glavu gore
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Glavu dole
   Press and hold the HEAD DOWN button of the remote, the head actuator moves in, and stops when released.
3. Noga gore
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Noga dole
   Press and hold the FOOT DOWN button of the remote, the foot actuator moves in, stop when released.
5. Lumbar up
   Press and hold the LUMBAR UP button of the remote. The lumbar actuator moves out and stops when released.
6. Lumbar down
   Press and hold the LUMBAR DOWN button of the remote, the lumbar actuator moves in, and stops when released.
7. Nagni se
   Press and hold the TILT UP button of the remote, the head tilt actuator moves out, and stops when released.
8. Nagnite se prema dolje
   Press and hold the TILT DOWN button of the remote, the head tilt actuator moves in, and stops when released.
9. UBB
   Click the Underbed light button to open or shut the light under the bed.
10. Massage head +
    Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
11. Massage foot +
    Click the MASSAGE Foot button, head massage motor switches massage intensity, massage intensity switches among 0-1-2-3；
12. Massage head –
    Clicking will cause the intensity of the head massage to gradually decrease, with a total of 3 levels.；
13. Massage foot –
    Clicking will cause the foot massage intensity to cycle and decrease gradually, with a total of 3 levels.；
14. Tajmer za masažu
    If the massage motors do not work, the button is invalid. If the massage motors work, click the button to switch the massage time. When the massage time switches to 0, turn off the massage.
15. Stan
    Click the FLAT button, and the bed goes flat. Stop when you click any button during the process of going flat.
16. ZG dugme
    Click the ZG button, the actuator moves to the ZG position, and stops when any button is clicked during the movement.
17. Položaj memorije
    Click the memory position to move the actuator to the memory position.

IZJAVA FCC-a

Upozorenje FCC
Ova oprema je testirana i utvrđeno je da je u skladu s ograničenjima za digitalne uređaje klase B, u skladu s dijelom 15 FCC pravila. Ova ograničenja su dizajnirana da pruže razumnu zaštitu od štetnih smetnji u stambenoj instalaciji. Ova oprema stvara, koristi i može emitovati radiofrekvencijsku energiju i, ako nije instalirana i korištena u skladu s uputama, može uzrokovati štetne smetnje radio komunikacijama. Međutim, ne postoji garancija da se smetnje neće pojaviti u određenoj instalaciji. Ako ova oprema uzrokuje štetne smetnje radio ili televizijskom prijemu, što se može utvrditi isključivanjem i uključivanjem opreme, korisnik se ohrabruje da pokuša ispraviti smetnje jednom ili više sljedećih mjera:

• Preusmjerite ili premjestite prijemnu antenu.
• Povećajte razmak između opreme i prijemnika.
• Povežite opremu u utičnicu na strujnom kolu različitom od onog na koji je priključen prijemnik.
• Za pomoć se obratite prodavaču ili iskusnom radio/TV tehničaru.

Bilo kakve promjene ili modifikacije koje nije izričito odobrila strana odgovorna za usklađenost mogu poništiti korisnikovo ovlaštenje da koristi opremu.
Ovaj uređaj je u skladu s dijelom 15 FCC pravila. Rad je podložan sljedeća dva uslova:

1. Ovaj uređaj možda neće uzrokovati štetne smetnje i
2. Ovaj uređaj mora prihvatiti sve primljene smetnje, uključujući smetnje koje mogu uzrokovati neželjeni rad.

Informacije o izloženosti RF

• Uređaj je procijenjen da ispunjava opšte zahtjeve za izlaganje RF zračenju. Uređaj se može koristiti u prijenosnim uvjetima izloženosti bez ograničenja.

ISED RSS Upozorenje
Ovaj uređaj je u skladu sa RSS standardima za inovacije, nauku i ekonomski razvoj Kanade bez licence. Rad je podložan sljedeća dva uslova:

1. This devicemay not cause interference, and
2. Ovaj uređaj mora prihvatiti sve smetnje, uključujući smetnje koje mogu uzrokovati neželjeni rad uređaja.

Rješavanje problema

• Daljinski ne reaguje: Ensure batteries are correctly inserted and not depleted. Replace with new AAA 1.5V batteries if necessary.
• Bed not moving: Check if the remote’s batteries are working. Ensure no obstructions are preventing bed movement. If the bed is stuck, try pressing the ‘FLAT’ button.
• Massage not working: Ensure the massage motors are turned on. The ‘Massage Timer’ button will be invalid if the motors are off.
• RF izloženost: Uređaj je procijenjen da ispunjava opšte zahtjeve za izloženost RF zračenju i može se koristiti u prijenosnim uvjetima izloženosti bez ograničenja.

FAQs

• Q: What type of batteries does the remote use?
  • A: The RC302F remote control uses 3 x AAA 1.5V batteries.
• Q: How do I stop the bed from moving to a preset position (eg, Flat or Zero G)?
  • A: You can stop the bed’s movement to a preset position by clicking any other button on the remote during the process.
• P: Mogu li podesiti intenzitet masaže?
  • A: Yes, you can increase head/foot massage intensity using ‘MASSAGE HEAD +’ / ‘MASSAGE FOOT +’ buttons and decrease it using ‘MASSAGE HEAD -‘ / ‘MASSAGE FOOT -‘ buttons. There are 3 levels of intensity.
• Q: What does the UBB button do?
  • A: The UBB button controls the underbed light, turning it on or off with a click.
• Q: What should I do if the remote isn’t working after changing batteries?
  • A: Ensure the new batteries are inserted with the correct polarity. If the issue persists, contact Keeson Technology Corporation Limited customer support.