Sadržaj
sakriti
HONGWEI MICROELECTRONICS ESP32 C3 Razvojni moduli Mini Wifi BT Bluetooth modul
Specifikacije
- Proizvod: ESP32 Development Board
- Proizvođač: Espressif
- Kompatibilnost: Arduino IDE
- Webstranica: https://www.arduino.cc/en/Main/Software
Upute za upotrebu proizvoda
Download Software and Development Board
- Preuzmite Arduino IDE softver sa službene stranice webgore navedena stranica.
- Otvorite Arduino IDE softver da biste započeli proces podešavanja.
Add ESP32 Development Environment
- U Arduino IDE-u, idite na File -> Preferences (shortcut key ‘Ctrl+,’).
- Add the JSON address of the ESP32 development board in the board manager settings.
- Click ‘OK’ to confirm and return to the Arduino IDE homepage.
- In the Development Board Manager, search for ESP32 and install the development environment.
Start Downloading and Testing
- Odaberite File -> Prample -> Blink to download a flashing light program for testing.
- Modify the code as needed, such as changing LED_PIN to the desired pin number.
- Select the corresponding port and development board model in Arduino IDE.
- If the Comport is not recognized, manually enter download mode following the provided methods.
- Click upload and wait for the download to complete. The blue indicator light on the module should flash normally.
Odricanje od odgovornosti i Obavijest o autorskim pravima
Informacije u ovom dokumentu, uključujući URL adrese za referencu, podložna je promjenama bez prethodne najave. Dokumentacija se pruža „kakva jeste“ bez garancija bilo koje vrste, uključujući bilo koje garancije za prodaju, prikladnost za određenu svrhu ili nekršenje, kao i sve garancije navedene na drugom mjestu u bilo kojem prijedlogu, specifikaciji ili sample. U ovom dokumentu se ne preuzima nikakva odgovornost, uključujući bilo kakvu odgovornost za kršenje bilo kojeg patentnog prava koje proizilazi iz upotrebe informacija u ovom dokumentu. Ovaj dokument ovime ne daje, putem estoppela ili na drugi način, nikakvu licencu, izričitu ili impliciranu, za korištenje bilo kojeg prava intelektualnog vlasništva.
The test data obtained in this article are all obtained by the Ebyte laboratory test, and the actual results may be slightly different. All trade names, trademarks and registered trademarks mentioned herein are the property of their respective owners and are hereby acknowledged. Ebyte Electronic Technology Co., Ltd.
Napomena
Due to product version upgrade or other reasons, the contents of this manual may be changed. Ebyte Electronic Technology Co., Ltd. reserves the right to modify the contents of this manual without any notice or prompt. This manual is only used as a guide . Chengdu Ebyte Electronic Technology Co., Ltd. does its best to provide accurate information in this manual. However, Chengdu Ebyte Electronic Technology Co., Ltd. does not ensure that the contents of the manual are completely error-free. All statements in this manual, information ,and advice do not create any express or implied warranties.
Gotovoview
Uvođenje proizvoda
ESP32-C3-MINI-1-TB and ESP32-C3-MINI-1U-TB are two entry-level development boards for developing and testing small-sized ESP32-C3-MINI-1 & ESP32-C3-MINI-1U modules. This group of development boards has complete Wi-Fi and Bluetooth low energy functions, and most of the pins of the modules on the board have been led out to the pin headers on both sides. Developers can easily connect various peripherals through jumpers according to actual needs. The device can also be used by plugging the development board into the breadboard.
Parameters
Uvod u komponente
Components and interfaces
Napomena: For specific function instructions, please refer to the user manual of ESP32-C3-MINI-1.
Definicija pin-a
Sljedeća pozitivna ilustracija prikazuje ESP32-C3-MINI-1-TB kao nprample:
Bilješke
- P: power supply; I: input; O: output; T: can be set to high impedance.
- GPIO2, GPIO8, and GPIO9 are the strapping pins of the ESP32-C3FN4 chip. During chip power-on and system reset, the strapping pin controls the chip function according to the binary voltage value of the pin. For the specific description and application of the strapping pins, please refer to the chapter on strapping pins in the ESP32-C3 chip manual.
- The power supply mode is Micro-USB interface power supply (default), 5V and GND pin header power supply, 3 and V3 and GND pin header power supply.
Uvod u funkciju
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB. The main components and connection methods are shown in the following diagram:
Vodič za snimanje programa
- Prije uključivanja, provjerite jesu li ESP32-C3-MINI-1-TB & ESP32-C3-MINI-1U-TB netaknuti.
- Tools to prepare: ESP32-C3-MINI-1-TB or ESP32-C3-MINI-1U-TB, USB 2.0 cable (Standard A to Micro-B, computer -Windows, Linux, or macOS. Please make sure to use Appropriate USB cables; some cables are for charging only, not for data transfer and programming.
- Connect the USB data cable, and burn the program from the computer software.
Istorija revizija
Često postavljana pitanja
How do I troubleshoot if the blue indicator light does not flash after uploading?
Check the connection between the development board and your computer, ensure the correct port and board are selected in Arduino IDE, and try re-uploading the program.
Can I use other development environments with this ESP32 board?
While these instructions are tailored for Arduino IDE, you may be able to adapt them for other environments that support ESP32 development.
Dokumenti / Resursi
 |
HONGWEI MICROELECTRONICS ESP32 C3 Razvojni moduli Mini Wifi BT Bluetooth modul [pdf] Korisnički priručnik ESP32 C3 Moduli Razvojne Ploče Mini Wifi BT Bluetooth Modul, ESP32 C3, Moduli Razvojne Ploče Mini Wifi BT Bluetooth Modul, Moduli Ploče Mini Wifi BT Bluetooth Modul, Wifi BT Bluetooth Modul, BT Bluetooth Modul, Bluetooth Modul |