GRID BROWS LED Brows
PRIJE NEGO POČNETE
Thank you for your purchase. In this manual we will provide you with the means to get started using your new GRID product!
Similarly used in all forms of real motorsports racing, GRID Brows are a much needed expansion for any dash. With 18 programmable LEDs the possibilities are endless with multiple uses such as spotter info, slip/lock, TC and ABS. (depending on the sim used).
Obrve
Karakteristike
- CFRP enclosures
- 2x 9 RGB LEDs
- RaceDirector compatible
Carbon fiber mounting brackets
Mounting the brows
To be able to mount the brows, we have included carbon fiber mounting brackets. Here is how we suggest to use them, though you can orient them the way you like to suit your cockpit or preference.
Be sure to use bolt (A8) to fasten the mounting bracket (A3) to a brow (A1). 
U ovom example we are mounting the brows and control box to the uprights of a cockpit. Of course you are free to mount them how and where you see fit.
Since the brows are daisy-chained together, the first brow unit in the chain is considered the ‘first’ one, defaults to being the left brow. Therefore it makes sense to mount the control box on the left side of the cockpit. Of course, you are free to install these parts how you like to.
All bolts (A7) and slot-nuts (A9) shown are of the same size/type.
Connecting the brows
As mentioned on the previous page, the brows are daisy chained to each other and to the control box. Provided are two brow cables, a short (A6) and long (A5) one, next to the USB cable (A4). To wire the control box to the first brow in the chain, we recommend using the short cable (A6). The long cable (A5) will connect the two brow modules together.
Attention! Be mindful of the way you connect the modules to each other, always go from an ‘OUT’ to an ‘IN’. For the second brow module, ‘OUT’ can be used to connect a third and fourth module. A maximum of four modules in total is supported.
Both brow modules are identical, it doesn’t matter in which order you connect them to each other or to the control box. 
RaceDirector
- Download and install the lastest version of RaceDirector from www.sim-lab.eu/srd-setup
- For explanation on how to install and use RaceDirector, please read the manual. This can be found here: www.sim-lab.eu/srd-manual
- Sada ćemo preći preko samih osnova kako bismo započeli korištenjem RaceDirector-a da biste što prije krenuli na pravi put. Zaista vas pozivamo da prođete kroz priručnik za detaljnije objašnjenje mogućnosti koje RaceDirector može ponuditi.
- Prvo trebamo aktivirati proizvod, to se radi na stranici 'Postavke' (1).
- Tick the ‘Activate’ tickbox next to ‘GRID Brows’ (2) and its icon (3) should appear on the left side of the screen. Selecting the icon (3) will take us to its device pages.
Stranice uređaja
These pages allow you to control, configure and update your device. To keep this manual concise, we only go over the basics or unique functions.
LEDS (A)
All of these options are identical to the LEDs device page for other devices, although there is one additional option which is unique for the Brows and DDU5 V2. 
The Brows V2 can be daisy chained together, allowing up to 4 brow modules to be connected (1) in total. Please be aware your profiles need to be custom made to suit your needs here. Our default profile is made for the base pair as packaged.
For more information on connectivity, please refer to Page 6 of this manual.
FIRMWARE (B)
On this page you can see the current firmware loaded on the device. If your firmware is out of date, we recommend to update it.
RaceDirector prati trenutne verzije firmvera. Kada detektuje razliku, obaveštenje 
će vas obavijestiti da je otkriven noviji firmver. 
Kada se otkrije ažurirana verzija firmvera, slijedite upute i kliknite na dugme 'Izvrši ažuriranje' (1).
RaceDirector will show the progress and will take care of the updating for you. If you see a windows explorer or USB device poppping up, don’t worry, it is part of the process.
Stariji uređaji mogu i dalje zahtijevati prethodni alat za ažuriranje firmvera. U tom slučaju, RaceDirector će vam reći šta da uradite.
Podrška za Simhub
For advanced users, we do still support people who prefer using Simhub. When adding a device, choose the ‘GRID Brows V2’ device.. 
Promjena funkcija LED dioda.
To change the LED effects you need to know their numbering to identify them on the modules. The following schematic shows the LED numbering for treference. 
Trebalo bi da ima dovoljno informacija u priloženom zadanom LED profiles da biste mogli podesiti LED postavke po svom ukusu. Za početak izgradnje vlastitog profesionalcafile, predlažemo da kopirate postojeći i promijenite gdje je potrebno. Advantage da uvijek imate sigurnosnu kopiju zadanog profile vratiti se na.
Napomena: za probleme/rješavanje problema sa vašim Simhub Pro uređajemfiles, molimo pogledajte dokumentaciju Simhuba ili Simhub podršku.
Opis materijala
| U KUTIJI | |||
| # | dio | QTY | Napomena |
| A1 | Obrve | 2 | |
| A2 | Kontrolna kutija | 1 | Interface to PC. |
| A3 | Montažni nosač | 2 | |
| A4 | USB-A kabl | 1 | |
| A5 | Brow cable long | 1 | Use between brows. |
| A6 | Brow cable short | 1 | |
| A7 | Vijak M5 X 14 DIN 7380 | 2 | |
| A8 | Vijak M5 X 8 DIN 7380 | 4 | |
| A9 | Matica M5 | 4 | |
Više informacija
Ako i dalje imate pitanja u vezi sa sastavljanjem ovog proizvoda ili u vezi samog priručnika, obratite se našem odjelu za podršku. Do njih se može doći na: support@sim-lab.eu
Alternatively, we have a Discord server where you can hang out or ask for help. www.sim-lab.eu/discord
Dokumenti / Resursi
 |
GRID BROWS LED Brows [pdfUputstvo za upotrebu VERSION 1.3, BROWS LED Brows, BROWS, LED Brows, Brows |