FlySpark F4 V1 Stack Flight Controller
Specifikacije
- Naziv proizvoda:
FlySpark F4 V1 BLS 60A paket - AI karakteristike:
Sensor Fusion, PID Autotuning, Adaptive Filtering - Podrška za softver:
Betaflight, INAV, Ardupilot, EMU-let, SkyBrush - ESC Communication:
BLHeli_S Bluetooth i USB-C - Povezivanje:
3-6S LiPo - Dimenzija:
47.8 mm (D) x 47.5 mm (Š) x 18.3 mm (V) - Montaža:
30.5 x 30.5 mm sa veličinom rupe od 4 mm - Težina:
34g
Upute za upotrebu proizvoda
FlySpark F4 V1 kontroler leta
Izgled:
Refer to the user manual for the layout of the flight controller.
periferna veza:
Connect peripherals as per the provided diagram.
Konfiguracija aplikacije i FC-a:
Use the recommended apps and follow the configuration instructions.
Ažuriranje FC firmvera:
Connect the flight controller to a PC via USB for firmware updates.
FLYSPARK BLS 60A 4-u-1 ESC
Izgled:
Check the layout guide in the manual for proper installation.
Povezivanje sa motorima i kablom za napajanje:
Connect motors and power cables securely.
Konfiguracija ESC-a:
Use the FlySpark app for ESC configuration settings.
Ažuriranje ESC firmvera:
Follow the provided steps to update the firmware for ESC.
FlySpark F4 V1 BLS 60A paket
Specs Overview
Paket
- FlySpark F4 V1 Flight Controller x 1
- FlySpark BLS 60A 4-in-1 ESC x 1
- 35V 1000uF Low ESR kondenzator x 1
- M3 najlonska matica x 4
- SH 1.0 mm 25-pinski kabel dužine 8 mm (za FC-ESC vezu) x 1 SH 1.0 mm 75-pinski kabel dužine 6 mm* x 1
- M3*30mm šrafovi sa unutrašnjim šestouglom x 4
- DJI 6pin kabl (80mm) x 1
- XT60 kabl za napajanje (100 mm) x 1
Dijagram FC veze
Vodič za FC i ESC veze
Metoda 1:
- Using 8.Pin JST Cable
Metoda 2:
Direktno lemljenje
- Zalemite 8 žica na 8 kontaktnih pločica na svakom kraju, slijedeći definicije kontaktnih pločica u nastavku
Specifikacije kontrolera leta
- Koristite 6-pinski kabl koji dolazi sa O3 Air jedinicom
- Koristite 6-pinski kabel koji dolazi s FlySpark F4 V1 BLS 60A Stackom
F C Firmware update
To update the firmware for your FlySpark F4 VI flight controller, please follow these steps:
Connect the Flight Controller to Your PC:
- Use a USB cable to connect the FlySpark F4 VI flight controller to your PC
Open Betaflight I INAV Configurator.
- . Launch the Betaflight Configurator or INAV Configurator on your PC. For this guide, we’ll use Betaflight Configurator as an example.
Navigate to Firmware Flashing:
- In the Betaflight Configurator, navigate to the ‘Firmware Flashing’ page.
Select Target and Flash Firmware:
- Choose the target firmware for ‘Flyspark F4 VI’ from the dropdown menu.
- Initiate the firmware flashing process.
Napomena:
The Flyspark F4 VI flight controller does not support wireless firmware flashing. It must be performed using a USB connection to your PC.
Flyspark BLS 60A 4-in-l ESC
Povezivanje sa motorima i kablom za napajanje
ESC Specs FlySpark F4 V1 BLS 60A Stack
ESC ažuriranje firmvera
Ovaj 8-bitni 50A ESC dolazi s unaprijed instaliranim BLHeliS firmverom, ali se može flešovati i na Bluejay firmver, nudeći filtriranje obrtaja i podršku za dvosmjerni Dshot. Slijedite ove korake za ažuriranje firmvera:
- Prepare Your Drone:
Remove all propellers from your drone for safety. - Connect ESC to Flight Controller:
Ensure the flight controller is properly connected to the ESC, then power up the drone. This step ensures the ESC initializes correctly. - Povežite se na PC:
Use a USB Type-C cable to connect the flight controller to your computer. - Access Firmware Configuration:
Open the Chrome browser and visit: www.esc-configurator.com - Flashing Steps:
Follow the firmware flashing steps displayed on the configurator website. Ensure you select the appropriate options for flashing to Bluejay firmware.
OPREZ:
- PROPELLERS OFF: REMOVE ALL PROPELLERS.
- SECURE CONNECTION: ENSURE SECURE ESC CONNECTION.
- FOLLOW STEPS: FOLLOW FLASHING INSTRUCTIONS CAREFULLY.
- STABLE POWER: ENSURE STABLE POWER SUPPLY.
- www.FlySpark.in
FAQs
Kako da ažuriram firmver ESC-a?
To update the ESC firmware, follow these steps: 1. Prepare Your Drone: Remove all propellers for safety. 2. Connect ESC to Flight Controller: Ensure proper connection to the ESC and power up.
Dokumenti / Resursi
 |
FlySpark F4 V1 Stack Flight Controller [pdf] Korisnički priručnik F4 V1, BLS 60A, F4 V1 Stack Flight Controller, F4 V1, Stack Flight Controller, Flight Controller, Controller |