deli T313 Split Comb Binding Machine Instruction Manual

Product Structure & Components

1. Drška
2. Comb plate
3. Pull ring plate
4. Pull selector
5. 5Locating block
6. Pull ring handle
7. Punching margin control
8. Kutija za papir

Consumable Specification Recommendations

Uputstvo za upotrebu

1. Mašina se koristi za štancanje papira i plastičnih listova, a plastična spajalica se koristi za labavo uvezivanje. Mašina se može koristiti samo u tu svrhu i molimo Vas da je koristite u skladu sa uputstvima za upotrebu.
2. Prije bušenja originalnih materijala, ne zaboravite upotrijebiti otpadni papir kako biste provjerili da li mašina radi normalno.
3. Povremeno praznite kontejner za otpad.
4. Gornji granični broj za probijanje je 20 i ovaj broj se ne smije prekoračiti.

Punching Steps

1. Set the locating block at the desired position. Turn the knob counterclockwise to loosen. Turn it clockwise to fasten.
2. Turn the punching margin control to set the edge margin.
3. Pull out and disengage the proper punch selector when punching odd-sized documents.
4. Push paper into the punching channel. Pull the handle all the way down until it stops to punch completely through. Pull the handle up completely and remove the punched paper.

Binding Steps

1. Place the rubber ring behind the comb-shaped plate and move the rubber ring to the left with the opening facing upwards.
2. Rotate the pull ring handle clockwise to open the rubber ring and then put the punched file onto the rubber ring.
3. Rotate the pull ring handle counterclockwise to remove the file.

Troubleshooting and Common Fault Analysis

Parametri proizvoda

• Maksimalna debljina štancanja: 20 sheets of paper (80g A4 paper)
• Binding edge distance: 2-5 mm
• Hole Size and Pitch: 3mm × 8mm, 14.3mm pitch
• Specifikacija vezivanja: A4 size paper or smaller
• Maksimalna debljina poveza: 450 listova
• Neto težina: 6.35 kg
• Dimenzije uređaja: 405 mm × 315 mm × 380 mm

Garantni list

Hvala na kupoviniasing our products. The interests of customers who purchase our products will be protected. For any malfunction due to product manufacturer quality issues, please contact authorized local dealers or service centers with this receipt and the warranty card.

Uslovi garancije:

1. For product failures occurring under normal operating circumstances, free of charge repair and spare parts replacement services shall be provided by our company within one year commencing from the date of purchase.
2. Customers are required to present this warranty card and the original purchase invoice to our company upon requesting warranty service. This warranty card shall be valid only after the following form is filled out in detail and affixed with the official seal of the dealer.
3. Ne pruža se besplatna usluga popravke u slučaju bilo koje od sljedećih okolnosti:
   1. Istek garantnog roka;
   2. Oštećenja uzrokovana nepravilnom upotrebom, održavanjem ili skladištenjem koje nije u skladu sa zahtjevima korisničkog priručnika;
   3. Kvar ili oštećenje koje je rezultat neovlaštenog rastavljanja, popravke ili modifikacije;
   4. Neuspjeh ili šteta uzrokovana višom silom;
   5. Wear parts or consumable accessories.

This warranty card is delivered with the product (one card per product). Please keep this warranty card in a secure place to claim free warranty service. It will not be replaced if lost.

Warranty Registration RecordsDate of Purchase: ______ Year ______ Month ______ Day

(Dealer Copy: This copy shall be cut along the dotted line and retained by the dealer.)