coolo Zigbee Smart Light Sensor User Manual

Coolo Zigbee Smart Light Sensor

Mrežna konfiguracija

1. Uključite proizvod
   • Align the opener to the slot
   • Okrenite poklopac baterije u smjeru suprotnom od kazaljke na satu da biste ga otvorili
   • Remove the battery insulation film to power
2. Pritisnite tipku RESET 3 sekunde i otpustite, crvena LED lampica će treptati za konfiguraciju mreže.

Uputstva za instalaciju

Položaj ugradnje
Remove the protective film from the adhesive on the base. Stick the device where needed as shown in the following figure.

Pažljivo pročitajte priručnik i pravilno koristite proizvod
Hvala na kupoviniasing and using this product. Before using the product, please read the manual carefully and use the product correctly. In order to avoid damage to the equipment, such as all consequences caused by abnormal operation, the company will not bear any responsibility. The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Opis proizvoda

Savjeti:
This product must be connected to the Zigbee gateway to function properly and upload data to the server/APP

Parametri proizvoda

• Product Name Zigbee Ambient Light Sensor
• Wireless Protocol Zigbee 3.0
• Detection Range 0~157K Lux
• Battery TypeCR2450
• Standby Current<10uA
• Working Temperature -10 ~ 55 C
• Working Humidity 0% ~ 95%RH
• Product Size Ф 33×16mm