YDLIDAR specializes in affordable, high-performance LiDAR sensors and solutions for robotic navigation, obstacle avoidance, and SLAM applications.
YDLIDAR is a leading brand providing LiDAR sensors and intelligent sensing solutions, manufactured by Shenzhen EAI Technology Co., Ltd. The company focuses on the research and development of low-cost, high-stability 2D and 3D laser scanners designed for a wide range of applications, including intelligent sweeping robots, service robots, and educational development kits. Their products enable precise mapping, concurrent localization and mapping (SLAM), and obstacle avoidance for autonomous devices.
YDLIDAR offers extensive support for developers, providing SDKs and drivers compatible with Windows and Linux (ROS/ROS2) environments. With a commitment to innovation in the field of smart sensors, YDLIDAR helps power the next generation of intelligent automation.
Najnoviji priručnici od manuals+ kreirano za ovaj brend.
Pogledajte videozapise o postavljanju, instalaciji i rješavanju problema za ovaj brend.
Česta pitanja o priručnicima, registraciji i podršci za ovaj brend.
Most YDLIDAR development kits include a USB adapter board. Connect the sensor to the adapter, then connect the adapter to your PC using the provided USB cable. If your USB port does not supply enough current, ensure you connect the auxiliary power interface (USB_PWR) to a 5V power source.
Drivers (such as the CP2102 USB driver) and visualization software (LidarViewer, EAIViewer, or TIAViewer) are available on the Downloads & Support section of the official YDLIDAR website.
Yes, YDLIDAR provides official ROS and ROS2 driver packages for Linux environments. These can be found on their official GitHub repositories or linked through their support page.
Check if the USB power supply is sufficient; many issues are caused by low current. Connect an auxiliary 5V power supply to the USB adapter board. Also, verify that the correct serial port driver is installed and the correct baud rate is selected in the software.