Neoteck 0-10000 PPM Gas Leak Detector RD710 Instruction Manual

1. Uvod

The Neoteck RD710 Gas Leak Detector is designed for rapid and accurate detection of various combustible gases. This device provides audible and visual alarms to alert users to potential gas leaks, ensuring safety in residential, recreational, and industrial environments. Please read this manual thoroughly before operation to ensure correct usage and optimal performance.

Sigurnosne mjere

• Always perform zero calibration in a clean air environment (e.g., outdoors) to prevent inaccurate low readings.
• Ensure the device is adequately charged. Low battery can lead to significant measurement inaccuracies.
• Ne izlažite uređaj ekstremnim temperaturama ili vlazi.
• Izbjegavajte ispuštanje ili izlaganje uređaja jakim udarima.

2. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• 1x Neoteck RD710 Gas Leak Detector
• 1x USB Type-C kabel za punjenje
• 1x vreća za odlaganje
• 1x uputstvo za upotrebu

Image: Neoteck RD710 Gas Leak Detector with included accessories.

3. Značajke proizvoda

3.1 High Sensitivity Sensor

The RD710 features a semiconductor sensor for rapid detection of combustible gases, with a response time of 0.5-3 seconds. It offers a wide detection range of 0-10000 PPM (methane-based) with 1 PPM sensitivity.

Image: Precision sensing technology detecting various combustible gases.

3.2 Visual & Audible Alarms

The device provides real-time gas concentration feedback through a 3-color LED indicator and an intensifying buzzer:

• zeleno: Low concentration (0-499 PPM)
• Žuto: Medium concentration (500-1999 PPM) with buzzing
• crveno: High concentration (2000 PPM and above) with louder buzzing

Image: Visual and audible alarm system with LED indicators.

3.3 Large LCD Display

A 2.9-inch backlit LCD provides clear, real-time readings of PPM values, battery status, and an analog bar graph for gas concentration, even in low-light conditions.

Image: 2.9-inch large backlit screen for easy reading.

3.4 Rechargeable Battery & Type-C Charging

Equipped with a 1200mAh rechargeable battery, supporting over 3000 charge cycles and up to 16 hours of continuous usage. The device charges via a universal Type-C cable and can operate while charging.

Image: Rechargeable battery with Type-C charging.

3.5 Multi-Gas Detection

The RD710 detects various common combustible gases, including Liquefied Petroleum Gas (LPG), Liquefied Natural Gas (LNG), methane, ethane, propane, butane, and natural gas.

3.6 Dodatne funkcije

• Ugrađena lampa: Za upotrebu u uslovima slabog osvetljenja.
• Zadržavanje podataka: Zamrzava trenutno očitavanje na ekranu.
• Automatsko isključivanje: Automatically shuts down after 10 minutes of inactivity to conserve battery.
• Funkcija isključivanja zvuka: Allows silencing of the audible alarm.

4. Podešavanje

4.1 Početno punjenje

Before first use, fully charge the device using the provided USB Type-C cable and a compatible USB power adapter (not included). The battery indicator on the LCD will show charging status.

4.2 Power On and Warm-up

1. Pritisnite i držite dugme za napajanje (U) da biste uključili uređaj.
2. The device will enter a 30-second warm-up period. The display will count down.

4.3 Kalibracija nule

After warm-up, perform zero calibration to ensure accurate readings. This must be done in a clean air environment, free from any combustible gases.

1. Take the device to an area with clean air, such as outdoors.
2. Press the "MEAS (Set '0')" button. The device will calibrate to zero.
3. Once calibration is complete, the device is ready for use.

Image: Performing zero calibration in a clean air environment.

5. Operacija

5.1 Gas Detection Procedure

1. After warm-up and zero calibration, slowly move the sensor tip of the detector towards the suspected leak area.
2. Observe the LCD display for PPM readings and the analog bar graph.
3. Listen for the audible alarm and note the color of the LED indicator. The alarm intensity and LED color will change with increasinkoncentracija plina g.

5.2 Using Buttons

• Dugme za napajanje (U): Pritisnite i držite za uključivanje/isključivanje.
• MEAS (Set '0') Button: Initiates zero calibration.
• Dugme APO: Toggles the auto power-off function.
• Dugme HOLD: Zamrzava trenutno očitanje na ekranu. Pritisnite ponovo za otpuštanje.
• Dugme za isključivanje zvuka: Toggles the audible alarm sound on/off.
• Dugme za lampu: Uključuje/isključuje ugrađenu svjetiljku.

6. Održavanje

6.1 Njega baterija

• Recharge the device when the low-battery warning appears on the display.
• Za optimalan vijek trajanja baterije, izbjegavajte često potpuno pražnjenje baterije.
• If storing the device for an extended period, charge it to approximately 50% and recharge every 3-6 months.

6.2 Čišćenje

• Obrišite vanjski dio uređaja mekom,amp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Keep the sensor tip clean and free from dust or debris to ensure accurate detection.

6.3 Skladištenje

• Uređaj čuvajte u priloženoj torbici za odlaganje kada se ne koristi.
• Uređaj držite na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.

7. Otkrivanje problema

8. Specifikacije

9. Garancija

The Neoteck RD710 Gas Leak Detector comes with an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. Please retain your proof of purchase for warranty claims.

10. Korisnička podrška

For technical assistance, troubleshooting, or warranty inquiries, please contact Neoteck customer support through the retailer where the product was purchased or visit the official Neoteck webstranica za kontakt informacije.