GOOLOO GT6000 Jump Starter & DS200 OBD2 Scanner User Manual

1. Uvod

This manual provides detailed instructions for the safe and effective use of your GOOLOO GT6000 6000A Jump Starter and GOOLOO DEEPSCAN DS200 OBD2 Diagnostic Scanner. Please read this manual thoroughly before operating the devices and retain it for future reference.

The GOOLOO GT6000 is a powerful portable jump starter designed to start vehicles with dead batteries, while also serving as a portable power bank. The GOOLOO DEEPSCAN DS200 is a compact OBD2 scanner that connects wirelessly to your smartphone, providing comprehensive vehicle diagnostics and maintenance functions.

Image 1.1: The GOOLOO GT6000 Jump Starter and GOOLOO DEEPSCAN DS200 OBD2 Scanner.

2. Važne informacije o sigurnosti

Always observe the following safety precautions when using the GOOLOO GT6000 Jump Starter and DS200 OBD2 Scanner to prevent injury or damage to the devices or your vehicle.

• Prije upotrebe pročitajte sva uputstva.
• Čuvati van domašaja djece.
• Do not expose the devices to rain or extreme temperatures.
• Nemojte rastavljati niti modificirati uređaje.
• Osigurajte odgovarajuću ventilaciju tokom upotrebe i punjenja.
• Wear eye protection when working with vehicle batteries.
• Izbjegavajte kratki spoj na kablovima za pokretanje motoraamps.
• Use the jump starter only for 12V lead-acid batteries.

Image 2.1: The GT6000 Jump Starter features multiple safety protections including over-charge, short-circuit, and reverse-polarity protection.

3. GOOLOO GT6000 Jump Starter

3.1. Proizvod je gotovview

The GT6000 is a high-capacity jump starter with a 6000A peak current, capable of starting all gas engines and diesel engines up to 12L. It also functions as a portable power bank with 100W bi-directional fast charging.

Image 3.1: Diagram showing the ports and controls of the GT6000 Jump Starter, including the BOOST button, jump cable socket, DC port, USB output ports, and IN/OUT PD100W port.

Image 3.2: The 3.2-inch LED display on the GT6000 shows battery level, charging power, low current mode, 'Ready to Start' status, low temperature reminder, and battery clips reversed warning.

3.2. Charging the GT6000

Before first use, fully charge the GT6000. It supports 100W bi-directional fast charging. A full charge from 0-100% takes approximately 1.4 hours.

1. Connect the provided USB-C cable to the IN/OUT PD100W port on the GT6000.
2. Connect the other end of the cable to a compatible 100W USB-C power adapter (a 100W car charger is included).
3. LED ekran će prikazivati ​​status punjenja i postotak baterijetage.

Image 3.3: The GT6000 charging, indicating 100W super fast charging capabilities.

3.3. Operating the Jump Starter

Follow these steps to jump-start a vehicle with a dead battery:

1. umetnuti: Insert the smart jumper cable plug into the jump cable socket on the GT6000. Ensure a secure connection.
2. Povežite se: Spojite crveni clamp na pozitivni (+) pol akumulatora vozila i crni clamp to the negative (-) terminal. Ensure the clamps are firmly attached. If the LED display shows "Battery Clips Reversed", recheck the connections.
3. Početak: Once the GT6000 display shows "READY", start your car engine. If the engine does not start immediately, wait 20-30 seconds and try again. Do not attempt more than 3 consecutive jump starts.
4. Ukloni: Nakon što se vozilo pokrene, isključite CLamps from the car battery first, then remove the jumper cable from the GT6000.

Image 3.4: Visual guide for the three steps to jump start your vehicle using the GT6000.

3.4. Korištenje kao power bank

The GT6000 can charge various electronic devices via its USB output ports and the bi-directional USB-C port.

• Connect your device's charging cable to one of the GT6000's output ports (5V/2.4A, 5V/9V/12V, or IN/OUT PD100W USB-C).
• The GT6000 will automatically begin charging your device.

Image 3.5: The GT6000 functioning as a portable power bank, charging a laptop and smartphone.

3.5. Funkcije LED svjetiljke

The GT6000 includes an integrated LED flashlight with multiple modes:

• Normal Light: Pritisnite i držite dugme za napajanje 3 sekunde da biste uključili baterijsku lampu.
• Strobe svjetlo: Short press the power button again to switch to strobe mode.
• SOS signal: Short press the power button a third time to activate the SOS signal mode.
• Isključi: Short press the power button a fourth time or press and hold for 3 seconds to turn off the flashlight.

3.6. GT6000 Specifications

4. GOOLOO DEEPSCAN DS200 OBD2 Scanner

4.1. Proizvod je gotovview

The DS200 is a wireless Bluetooth OBD2 scanner designed for comprehensive vehicle diagnostics. It connects to your smartphone via an app and supports full system diagnostics, bidirectional control, and various maintenance services.

4.2. Setup & App Installation

To begin using your DS200 scanner, you need to download and install the GOOLOO DEEPSCAN app on your smartphone.

1. Preuzmi aplikaciju: Traži "GOOLOO DEEPSCAN" in the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
2. Instalirajte aplikaciju: Preuzmite i instalirajte aplikaciju.
3. Registracija/Prijava: Follow the in-app instructions to register an account or log in if you already have one.

Image 4.1: The DS200 scanner and instructions for downloading the GOOLOO DEEPSCAN app from app stores.

4.3. Povezivanje s vašim vozilom

The DS200 connects to your vehicle's OBD2 port, typically located under the dashboard on the driver's side.

1. Locate your vehicle's 16-pin OBD2 port.
2. Plug the DS200 scanner firmly into the OBD2 port. The scanner will power on automatically.
3. Turn on your vehicle's ignition (engine off or running, depending on the diagnostic task).
4. Open the GOOLOO DEEPSCAN app on your smartphone and follow the prompts to connect to the DS200 via Bluetooth.

Image 4.2: The DS200 scanner connected to a vehicle's OBD2 port, displaying diagnostic information on a smartphone.

4.4. Osnovne dijagnostičke funkcije

Once connected, the DS200 app provides access to standard OBD2 functions:

• Pročitajte kodove: Retrieve Diagnostic Trouble Codes (DTCs) from the vehicle's Engine Control Unit (ECU).
• Obriši kodove: Erase DTCs and turn off the Check Engine Light (MIL) after repairs.
• Podaci uživo: View real-time sensor data, such as engine RPM, vehicle speed, coolant temperature, and fuel system status.
• I/M spremnost: Check the status of emission-related monitors to ensure the vehicle is ready for an emissions test.
• Podaci zamrznutog okvira: View a snapshot of sensor data recorded when an emission-related fault occurred.
• Podaci o vozilu: Retrieve vehicle identification number (VIN), calibration ID, and calibration verification numbers (CVN).

Image 4.3: The DS200 app interface displaying various full OBD functions like Read Code, Clear Code, O2 Sensor Test, and Live Data.

4.5. Napredne dijagnostičke funkcije

The DS200 offers advanced features for in-depth vehicle analysis:

• Potpuna dijagnostika sistema: Scan all available electronic control units (ECUs) in the vehicle, including Engine, Transmission, ABS, SRS, BCM, etc., to read and clear fault codes.
• Dvosmjerna kontrola: Perform active tests to control various vehicle components (e.g., turn on/off wipers, headlights, fuel pump) to verify their functionality.
• Usluge održavanja: Access common maintenance functions such as Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Resets, DPF Regeneration, ABS Bleeding, BMS Reset, and Airbag Reset.
• Vehicle Performance Test: Conduct tests to evaluate vehicle performance metrics like acceleration time, top speed, and engine load.

Image 4.4: The DS200 app interface listing 8 common maintenance services available for various vehicle systems.

Image 4.5: The DS200 app demonstrating bidirectional control, allowing users to troubleshoot faults by controlling components like wipers, mirrors, and headlights.

4.6. DS200 Specifications

5. Njega i održavanje

Proper care ensures the longevity and optimal performance of your GOOLOO devices.

• čišćenje: Use a soft, dry cloth to clean the exterior of both devices. Do not use abrasive cleaners or solvents.
• Skladištenje: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures. For the GT6000, ensure it is charged to at least 50% before long-term storage and recharge every 3-6 months.
• Rukovanje: Izbjegavajte ispuštanje ili izlaganje uređaja jakim udarcima.
• Kablovi: Inspect jumper cables and OBD2 connector for any damage before each use. Replace if frayed or damaged.

6. Otkrivanje problema

6.1. GT6000 Jump Starter Issues

• Uređaj se ne uključuje: Ensure the device is charged. Press and hold the power button for a few seconds.
• Vozilo ne pali:
  • Provjerite da li je clampsu sigurno spojeni na ispravne terminale baterije.
  • Ensure the GT6000 has sufficient charge.
  • If the battery is severely discharged, press the BOOST button on the GT6000 (if available and safe to do so, refer to specific product instructions for boost mode).
  • The vehicle battery might be completely dead or damaged and require replacement.
• "Battery Clips Reversed" error: Isključite clamps and reconnect them to the correct positive (+) and negative (-) terminals.

6.2. DS200 OBD2 Scanner Issues

• Skener se ne uključuje: Ensure the DS200 is fully plugged into the vehicle's OBD2 port and the vehicle's ignition is on.
• Nije moguće povezivanje putem Bluetootha:
  • Provjerite je li Bluetooth omogućen na vašem pametnom telefonu.
  • Restart the GOOLOO DEEPSCAN app.
  • Unplug and re-plug the DS200 from the OBD2 port.
  • Check if the app requires location permissions, as some Bluetooth functions do.
• Nema komunikacije sa ECU-om:
  • Provjerite da li je paljenje vozila uključeno.
  • Ensure the DS200 is securely connected to the OBD2 port.
  • Confirm your vehicle is OBD2 compliant (most vehicles from 1996 onwards).
  • Try scanning a different vehicle to rule out scanner malfunction.

7. Garancija i korisnička podrška

GOOLOO products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your GT6000 Jump Starter or DS200 OBD2 Scanner, please refer to the official GOOLOO webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu.

Please have your product model number (GT6000, DS200) and purchase information ready when contacting support.