Važne informacije o sigurnosti
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Ovaj grijač je dizajniran za hardwired installation only. It is not a plug-in unit.
- Ovaj grijač does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Instalaciju mora izvršiti kvalificirani električar u skladu sa svim nacionalnim i lokalnim električnim propisima.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Postavljanje i instalacija
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Montaža
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Električna veza
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Uputstvo za upotrebu
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Uključeno: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Podešavanje termostata: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- tihi rad: This convector heater operates silently, providing consistent warmth without fan noise.
- Početna upotreba: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Održavanje
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- čišćenje: Povremeno čistite vanjski dio grijača mekom,amp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Uklanjanje prašine: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- inspekcija: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Do Not Obstruct: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Rješavanje problema
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Grijač se ne uključuje. | Nema napajanja. Termostat je postavljen prenisko. Faulty wiring or thermostat. | Proverite prekidač. Povećajte postavku termostata. Obratite se kvalifikovanom električaru. |
| Grijač proizvodi nedovoljno toplote. | Veličina prostorije premašuje kapacitet grijanja. Protok zraka ometan. Thermostat calibration issue. | Ensure heater matches room size (up to 150 sq ft). Uklonite prepreke s rešetki. Recalibrate or replace thermostat. |
| Neobični mirisi tokom rada. | Početno sagorijevanje ostataka iz proizvodnje. Dust accumulation on heating element. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
If the problem persists after attempting these solutions, contact Stelpro customer support or a qualified electrician.
Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Stelpro |
| Broj modela | ASHC1502WCW |
| Wattage | 1500W (at 240V) / 1125W (at 208V) |
| Voltage | 240 Volts |
| AmpDob | 6.25 Amps |
| Dimenzije proizvoda (D x Š x V) | 3.94" x 28.63" x 17.56" (101 mm x 727 mm x 446 mm) |
| Težina artikla | 15.7 funte |
| Pokrivenost grijanja | Do 150 kvadratnih stopa |
| Posebne karakteristike | Energy Efficient, Fast Heating, Noiseless |
| Form Factor | Kabinet |
| Boja | Bijelo |
| Vrsta montaže | Zidni nosač |
| Vrsta goriva | Električni |
| Unutrašnja/vanjska upotreba | Indoor |
| UPC | 626296203491 |
Garancija
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5 godine ograničene garancije on the entire unit.
- Doživotna garancija na grejnom elementu.
- 3 godina garancije on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro website.
Podrška
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro webstranica: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.
