1. Proizvod je gotovview
This manual provides comprehensive instructions for the installation, operation, and maintenance of your BONTEC Full Motion TV Wall Mount, Model CT140L-FBA. This mount is designed to securely hold 26-65 inch flat and curved screens, offering extensive adjustability for optimal viewing.
Ključne karakteristike uključuju:
- Ultra-Long Extension: Extends from 2.9 inches to 37.4 inches from the wall.
- Univerzalna kompatibilnost: Supports VESA patterns from 200x200mm to 400x400mm and TVs weighing up to 77 lbs (35 kg).
- Potpuno podešavanje pokreta: Allows for +5°/-10° tilt, ±90° swivel, and ±4° leveling.
- Konstrukcija za teške uslove rada: Built from reinforced steel with a three-section five-arm structure for stability.
- Integrisano upravljanje kablovima: Includes cable ties to keep wires organized.
2. Sigurnosne informacije
WARNING: Read all instructions carefully before installation. Incorrect assembly or installation may result in serious injury or damage.
- Ensure the mounting surface can safely support the combined weight of the mount and your TV.
- This mount is designed for installation on concrete walls, brick walls, or wooden stud walls. NE montirajte samo na gipsane ploče.
- Always use appropriate safety equipment, such as eye protection, during installation.
- Ako niste sigurni u vezi bilo kojeg dijela procesa instalacije, obratite se kvalificiranom stručnjaku.
- Držite djecu i kućne ljubimce podalje od radnog područja tokom instalacije.
3. Sadržaj paketa
Verify that all components are present before beginning installation. Refer to the included hardware bag for specific screw sizes and quantities.
Tipičan sadržaj paketa uključuje:
- Sklapanje zidne ploče
- TV Bracket Arms
- Mounting Hardware (screws, anchors, washers for various TV and wall types)
- Bubble Level
- Kabelske vezice (5 komada)
- Uputstvo za upotrebu
4. Specifikacije
| Feature | Specifikacija |
|---|---|
| Brand | BONTEC |
| Broj modela | CT140L-FBA |
| Kompatibilne veličine TV-a | 26-65 inča |
| Maksimalni kapacitet težine | 77 lbs (35 kg) |
| VESA kompatibilnost | 200x200mm do 400x400mm |
| Produžetak sa zida | 2.9 inča (uvučeno) do 37.4 inča (izvučeno) |
| Ugao nagiba | +5° / -10° |
| Ugao okretanja | ±90° |
| Podešavanje nivoa | ±4° |
| Materijal | Ojačani čelik |
| Boja | Crna |
5. Postavljanje i instalacija
Before you begin, ensure you have the necessary tools: a drill, stud finder (for wood studs), pencil, measuring tape, and a hammer (for concrete/brick anchors). A bubble level is included with the mount.
5.1. Wall and TV Compatibility Check
Confirm your TV's VESA pattern and weight are within the mount's specifications. The mount supports VESA patterns from 200x200mm to 400x400mm and a maximum weight of 77 lbs. This mount is compatible with concrete, brick, and wooden stud walls. Do not install on drywall alone.
This image illustrates the wide compatibility of the mount with various wall types (concrete, wood stud, brick) and VESA patterns, indicating a maximum load capacity of 77 lbs. It explicitly warns against mounting on drywall alone.
5.2. Koraci instalacije
For a detailed visual guide, please watch the official installation video below.
Official BONTEC CT140L Installation Guide video. This video provides step-by-step visual instructions for mounting the TV bracket to the wall and attaching the TV.
- Configure and Assemble Monitor Plate: Depending on your TV's VESA pattern, assemble the monitor plate using the provided screws (M-A/B/C/D/E/F) and arms (E, F).
- Attach VESA Plate to the Back of Your TV: Secure the assembled VESA plate to the back of your TV using the appropriate screws (M-G/H or M-I/J/K) and washers. Ensure a snug fit.
- Secure the Wall Plate to the Wall:
- For Wooden Stud Walls: Use a stud finder to locate the center of a wooden stud. Mark the drilling points using the wall plate as a template. Drill pilot holes and secure the wall plate using the provided lag bolts and washers.
- For Brick or Concrete Walls: Mark the drilling points. Drill holes using a masonry drill bit. Insert the concrete anchors flush with the wall. Secure the wall plate using the provided lag bolts and washers. Avoid drilling into mortar lines between bricks.
- Hang the TV onto the Wall Plate: Carefully lift your TV with the attached VESA plate and hook it onto the wall plate. Secure the TV to the mount using the safety screws or locking mechanism.
6. Uputstvo za upotrebu
Your BONTEC Full Motion TV Wall Mount offers versatile adjustments for optimal viewing sa raznih pozicija.
6.1. Adjusting Tilt, Swivel, and Level
- Nagib: The mount allows for a tilt range of +5° (upward) to -10° (downward). Use the tool-free tilt mechanism to adjust the vertical viewing kut.
- Okretni: The articulating arm allows for a ±90° swivel, enabling you to turn your TV left or right to suit your viewing position.
- Nivo: If your TV is not perfectly level after installation, you can adjust it by ±4° using the leveling screws on the TV plate.
This image demonstrates the tilt (+5°/-10°) and level (±4°) adjustment features of the full motion TV mount, allowing for flexible screen positioning.
This image illustrates the ±90° swivel function of the mount, highlighting its ability to provide optimal viewing angles from various locations within a room.
6.2. Upravljanje kablovima
Use the included cable ties to route and secure your TV cables along the articulating arms. This helps maintain a tidy appearance and prevents cables from getting tangled or damaged during adjustments.
This image highlights key design elements of the mount, including the tool-free tilt mechanism, heavy-duty square tube construction, integrated Velcro cable organizer, and smooth brass washers for fluid movement.
Official BONTEC CT140L Product Showcase video. This video demonstrates the various features and movements of the TV wall mount, including extension, swivel, and cable management.
7. Održavanje
Redovno održavanje osigurava dugotrajnost i siguran rad vašeg zidnog nosača za TV.
- čišćenje: Wipe the mount with a soft, dry cloth to remove dust. Avoid abrasive cleaners or solvents.
- Periodične kontrole: Annually, check all screws and bolts to ensure they are securely tightened. Over time, vibrations or frequent adjustments can cause fasteners to loosen.
- podmazivanje: The mount features smooth brass washers for durable adjustments. No additional lubrication is typically required.
8. Otkrivanje problema
If you encounter any issues with your BONTEC TV Wall Mount, refer to the following common problems and solutions:
| Problem | Moguće rješenje |
|---|---|
| TV nije ravan nakon instalacije. | Use the ±4° level adjustment feature on the TV plate to correct the angle. |
| Nosač se čini labavim ili nestabilnim. | Re-check all wall mounting bolts and TV attachment screws to ensure they are securely tightened. Verify the wall type is appropriate for installation. |
| Difficulty adjusting tilt or swivel. | Ensure no cables are obstructing movement. Check for any debris in the joints. The mount is designed for smooth movement; excessive force should not be necessary. |
| Nedostaju dijelovi. | Contact BONTEC customer support for assistance. |
9. Garancija i podrška
Your BONTEC TV Wall Mount is covered by a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official BONTEC webstranicu za detaljne uslove i odredbe garancije.
For technical support, replacement parts, or any questions regarding your product, please contact BONTEC customer service through their official channels. Contact information can typically be found on the product packaging or the BONTEC website.
