1. Uvod
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop. This advanced cleaning device combines powerful vacuuming with professional mopping, intelligent navigation, and a convenient self-emptying and mop-cleaning station.
Molimo vas da pažljivo pročitate ovaj priručnik prije upotrebe proizvoda i sačuvate ga za buduću upotrebu.
2. Komponente proizvoda
The Cecotec Conga Z100 X-Treme package includes the following items:
- Robot Vacuum and Mop Unit
- Self-Emptying and Mop Cleaning Station
- Adapter za napajanje
- Side Brushes (2 units)
- Main Brush (silicone)
- Bimaterial Mop Pad
- Disposable Dust Bag (pre-installed in station)
- Clean Water Tank (in station)
- Dirty Water Tank (in station)
- Korisnički priručnik (ovaj dokument)
3. Podešavanje
3.1 Raspakivanje i priprema
- Pažljivo izvadite sve komponente iz pakovanja.
- Remove any protective films, stickers, or foam inserts from the robot and the station.
- Provjerite da li su sve komponente navedene u Odjeljku 2 prisutne i neoštećene.
3.2 Placing the Self-Emptying and Mop Cleaning Station
- Place the station on a hard, level surface against a wall.
- Ensure there is at least 1 meter (3 feet) of clear space in front of the station and 0.5 meters (1.5 feet) on either side to allow the robot to dock properly.
- Keep the station away from direct sunlight, heat sources, and areas with high humidity.
- Plug the power adapter into the station and then into a wall outlet.
3.3 Punjenje rezervoara za čistu vodu
- Open the lid of the clean water tank on the station.
- Fill the tank with clean tap water up to the MAX line. Do not use detergents or cleaning solutions not approved by Cecotec.
- Close the tank lid securely.
3.4 Ugradnja bočnih četki
- Okrenite robota naopako.
- Align the side brushes with the corresponding posts (L for left, R for right) and press them down until they click into place.
3.5 Početno punjenje
- Place the robot onto the charging contacts of the station. Ensure the charging contacts on both the robot and the station are aligned.
- Robot će se automatski početi puniti. Ostavite ga da se potpuno napuni prije prve upotrebe (otprilike 4-6 sati).
3.6 Mobile Application Connection
- Preuzmite službenu aplikaciju Cecotec Conga iz trgovine aplikacija na vašem pametnom telefonu.
- Follow the in-app instructions to register an account and connect your Conga Z100 X-Treme robot. This typically involves connecting to the robot's Wi-Fi network during the setup process.
4. Uputstvo za upotrebu
4.1 Uključivanje/isključivanje
- Uključeno: Press and hold the power button on the robot until the indicator lights illuminate.
- Iskljuciti: Pritisnite i držite dugme za napajanje dok se indikatorska svjetla ne ugase.
4.2 Pokretanje ciklusa čišćenja
- Ensure the robot is fully charged and the clean water tank is filled (for mopping).
- Press the clean button on the robot or use the mobile app to start a cleaning cycle. The robot will automatically leave the station and begin cleaning.
- To pause cleaning, press the clean button once. Press again to resume.
- To send the robot back to the station, press the home button on the robot or use the app.
4.3 Režimi čišćenja
The robot offers various cleaning modes accessible via the mobile application:
- Automatski režim: Robot inteligentno čisti cijelo mapirano područje.
- Spot način rada: Čisti određenu malu površinu koncentriranim naporom.
- Edge način rada: Čisti uz zidove i rubove namještaja.
- čišćenje zona: Omogućava vam da definišete određena područja na mapi za čišćenje.
4.4 AI Navigation and Obstacle Avoidance
The Conga Z100 X-Treme utilizes AI with LaserEye technology for precise navigation. It identifies small objects, different floor types, and dirt levels, adapting its cleaning strategy accordingly. This allows it to navigate complex environments and avoid obstacles effectively.
4.5 AquaCycle Professional Mopping
The AquaCycle system ensures continuous mopping with clean water. The robot wets the bimaterial mop with clean water and wrings out dirty water into a separate tank, providing efficient and hygienic floor cleaning.
4.6 Wet&Protect Technology
The robot's intelligent mopping adapts to different surfaces. Its bimaterial mop provides deep cleaning with a super-absorbent side. When a carpet is detected, the robot activates CarpetCare mode and uses the smooth side of the mop to protect the carpet from moisture.
4.7 Usisna snaga
With an Ungravity motor providing 20000 Pa of suction power, the robot effectively cleans hidden dirt, even from high-pile carpets and deep tile grout.
5. Održavanje
Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum and mop.
5.1 Self-Emptying Station Maintenance
- Zamjena vrećice za prašinu: The station automatically empties the robot's dust bin into a disposable dust bag. Replace the dust bag when the indicator light on the station signals it is full (approximately every 12 weeks, depending on usage).
- Spremnik čiste vode: Refill with clean water before each mopping cycle.
- Rezervoar za prljavu vodu: Empty and rinse the dirty water tank after each mopping cycle to prevent odors and bacterial growth.
- Sušenje krpe: The station dries the mop with hot air after cleaning. Ensure the mop is properly positioned for effective drying.
5.2 Čišćenje komponenti robota
- Glavna četka: Regularly remove hair and debris from the main silicone brush. Use the cleaning tool provided.
- Bočne četke: Check for tangled hair or debris and clean as needed. Replace if worn or damaged.
- Bimaterial Mop Pad: Remove the mop pad after each mopping cycle and wash it thoroughly. It can be hand-washed or machine-washed (follow care instructions).
- Senzori: Obrišite senzore za pad na stijenu, senzore za zid i kontakte za punjenje čistom, suhom krpom kako biste osigurali pravilno funkcioniranje.
- Točkovi: Očistite dlake ili ostatke s kotača robota.
6. Otkrivanje problema
If you encounter issues with your Conga Z100 X-Treme, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Robot se ne uključuje. | Slaba baterija; dugme za napajanje nije pravilno pritisnuto. | Place robot on charging station; press and hold power button for 3 seconds. |
| Robot ne može pronaći stanicu za punjenje. | Station obstructed; robot too far from station. | Ensure clear space around station; manually place robot closer to station. |
| Loše performanse čišćenja. | Brushes or filters dirty/worn; dust bin full. | Clean/replace brushes and filters; empty dust bin. |
| Robot se često zaglavi. | Obstacles (cables, small objects); uneven surfaces. | Clear the cleaning area of obstacles; use virtual walls/no-go zones in app. |
| Problemi s povezivanjem aplikacija. | Incorrect Wi-Fi password; router too far; app outdated. | Verify Wi-Fi credentials; move robot closer to router; update app; reset robot's Wi-Fi. |
| Brisanje ostavlja tragove ili je neefikasno. | Mop pad dirty/worn; clean water tank empty; dirty water tank full. | Clean/replace mop pad; refill clean water tank; empty dirty water tank. |
| Greška vodene pumpe. | Pump malfunction; blockage in water lines. | Check for blockages; contact customer support if issue persists. |
For persistent issues not covered here, please refer to the official Cecotec support channels.
7. Specifikacije
| Feature | Detalj |
|---|---|
| Brand | Cecotec |
| Naziv modela | Conga Z100 X-Treme |
| Broj modela | A01_EU01_119672 |
| Snaga usisavanja | 20000 Pa |
| Kapacitet baterije | 5200 mAh |
| Navigation Technology | AI with LaserEye |
| Sistem za čišćenje | AquaCycle Professional Mopping, Wet&Protect Technology, Bimaterial XXL Mop |
| Samoprazneća stanica | Yes, with hot air mop drying |
| Kapacitet vrećice za prašinu | 3 litara |
| Kapacitet rezervoara za čistu vodu | 3 litara |
| Kapacitet rezervoara za prljavu vodu | 3 litara |
| Dimenzije robota (D x Š x V) | 35.2 x 35.2 x 10.5 cm |
| Težina robota | 4.92 kg |
| Voltage | 240 Volts |
| Tip kontrole | Kontrola aplikacija |
8. Garancija i podrška
Your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or to inquire about replacement parts and consumables, please contact Cecotec customer service through their official webweb-mjesto ili kontakt informacije navedene u vašoj dokumentaciji o garanciji.
Always ensure you have your product model number (A01_EU01_119672) and proof of purchase available when contacting support.
