LOFREE Flow2 Low-Profile Priručnik za upotrebu mehaničke tastature

Uvod

This manual provides comprehensive instructions for setting up, operating, and maintaining your LOFREE Flow2 Low-Profile Mechanical Keyboard. Please read this guide thoroughly before use to ensure optimal performance and longevity of your device.

Šta je u kutiji

• LOFREE Flow2 Mechanical Keyboard (100 Keys)
• 1.5m USB-C kabl
• 2.4GHz prijemnik
• 4 Replacement Keycaps (Windows/macOS specific)
• Korisnički priručnik (ovaj priručnik)

Image: Contents of the LOFREE Flow2 keyboard package.

Setup

1. Power and Connection Mode Switch

Locate the power and connection mode switch on the underside of the keyboard, behind the flip-out feet. This switch allows you to select between Wired, Bluetooth (BT), and 2.4GHz wireless modes.

Slika: Donja strana view of the keyboard with the mode switch.

2. Žična veza

To use the keyboard in wired mode, slide the switch to the 'Wired' position. Connect the provided USB-C cable to the keyboard's USB-C port and the other end to your computer.

3. Bežična veza od 2.4 GHz

For 2.4GHz wireless mode, slide the switch to the '2.4G' position. Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard should connect automatically. If not, press fn+4 (for 84/100-key models) or Fn + R (for 68-key models) to activate it.

Image: The keyboard highlighting its 1000Hz polling rate in wired and 2.4GHz modes.

4. Bluetooth veza

To connect via Bluetooth, slide the switch to the 'BT' position. On your computer or device, enable Bluetooth and search for available devices. Select 'LOFREE Flow2' from the list. To pair, press Fn + 1/2/3 (for 84/100-key models) or Fn + Q/W/E (for 68-key models) to select a Bluetooth channel.

5. Prekidač kompatibilnosti sistema

The keyboard supports both Windows/Android and macOS/iOS systems. To switch between input systems, hold down Fn + N for Windows/Android or fn+m for macOS/iOS. The keyboard comes with interchangeable keycaps for Windows and macOS layouts.

Image: Included Windows and macOS keycaps for system compatibility.

Uputstvo za upotrebu

1. Side Touch Bar Functions

The LOFREE Flow2 features a side touch bar for quick adjustments. Swipe up or down on the touch bar to control volume. Hold the Fn key and swipe up or down to adjust screen brightness. To lock the touch bar and prevent accidental touches, press and hold Fn + razmaknica otprilike 3 sekunde.

Image: The side touch bar for volume, brightness, and lock functions.

2. Postavke pozadinskog osvjetljenja

Adjust the keyboard backlight by holding the Fn taster i pritiskom na Strelica lijevo or Strelica desno keys. There are three lighting modes: Steady On, Breathing, and Off.

3. Key Switches and Keycaps

The LOFREE Flow2 uses Cloud Switch Series low-profile mechanical switches. These switches are hot-swappable, allowing for customization. To remove keycaps, use the included keycap puller. For larger keycaps like the spacebar, pull from both sides separately to prevent stabilizer damage. To remove switches, use the included switch puller, aligning it with the switch clips and gently wiggling it upward.

Slika: Eksplodirano view and specifications of the Surfer Linear switch.

4. Kompatibilnost QMK/VIA

The keyboard supports QMK/VIA for advanced customization of key remapping, macros, and shortcuts. Refer to the official LOFREE website for detailed instructions on using QMK/VIA software.

Slika: QMK/VIA softverski interfejs za prilagođavanje tastature.

Održavanje

• čišćenje: Use a soft, dry cloth to clean the keyboard surface. For deeper cleaning, remove keycaps and use compressed air to clear debris.
• baterija: The keyboard features a 3000mAh battery. Recharge via the USB-C cable when the battery indicator shows low power. Avoid extreme temperatures.
• Skladištenje: Store the keyboard in a cool, dry place away from direct sunlight and excessive moisture.

Rješavanje problema

• Tastatura ne reaguje: Ensure the power switch is on and the correct connection mode (Wired, 2.4G, or BT) is selected. For wireless modes, check battery level.
• Problemi s uparivanjem putem Bluetootha: Ensure the keyboard is in Bluetooth mode and your device's Bluetooth is enabled. Try selecting a different Bluetooth channel (Fn + 1/2/3 or Fn + Q/W/E) and re-pairing.
• Ključevi se ne registruju: Check if the keycaps are properly seated. If using hot-swappable switches, ensure they are fully inserted.
• Pozadinsko osvjetljenje ne radi: Adjust backlight settings using Fn + strelica lijevo/desno keys. Ensure the keyboard is powered on.

Specifikacije

Garancija i podrška

For warranty information, technical support, or further assistance, please visit the official LOFREE website or contact LOFREE customer service. Keep your purchase receipt for warranty claims.

Official LOFREE Store: LOFREE trgovina na Amazonu

Zvanični videozapisi proizvoda