LOFREE Flow2 Low-Profile Priručnik za upotrebu mehaničke tastature

1. Uvod

The LOFREE Flow2 is a low-profile mechanical keyboard designed for versatility and durability. It features an aluminum alloy body, Void Linear Switches, and offers three connection modes: wired (USB-C), 2.4GHz wireless, and Bluetooth. This manual provides detailed instructions for setting up, operating, and maintaining your Flow2 keyboard.

2. Podešavanje

2.1 Šta se nalazi u kutiji

Upon unboxing your LOFREE Flow2 keyboard, you will find the following items:

• LOFREE Flow2 mehanička tastatura
• 1.5m USB-C kabl
• 2.4GHz prijemnik
• 4 Replacement Keycaps (for Windows/macOS compatibility)
• Uputstvo za upotrebu

Opis slike: A flat lay image displaying all items included in the LOFREE Flow2 keyboard package: the keyboard, a braided USB-C cable, a small 2.4GHz USB receiver, four additional keycaps, and the user guide.

2.2 Povezivanje

The Flow2 keyboard supports three connection modes: Wired (USB-C), 2.4GHz Wireless, and Bluetooth. A dedicated switch on the back of the keyboard allows you to select your preferred mode.

Power Switch and Mode Selection

The power switch is located on the back of the keyboard, concealed behind one of the flip-out feet. Toggle this switch to select between Wired, Bluetooth (BT), or 2.4GHz wireless modes.

Opis slike: A close-up of the back of the LOFREE Flow2 keyboard, illustrating the three-way toggle switch for wired, Bluetooth, and 2.4GHz wireless connections, located near the USB-C port and a foldable kickstand.

Žičani način

1. Ensure the power switch on the back of the keyboard is set to the Žičani pozicija.
2. Povežite priloženi USB-C kabl sa USB-C portom tastature, a drugi kraj sa računarom.
3. Vaš sistem će automatski prepoznati tastaturu.

2.4GHz bežični način rada

1. Ensure the power switch on the back of the keyboard is set to the 2.4G pozicija.
2. Umetnite USB prijemnik od 2.4 GHz u slobodan USB priključak na računaru.
3. Na tastaturi pritisnite fn+4 to activate 2.4GHz mode. The keyboard should connect automatically.

Bluetooth režim

1. Ensure the power switch on the back of the keyboard is set to the BT pozicija.
2. Na tastaturi pritisnite fn+1, fn+2, ili fn+3 za odabir Bluetooth kanala. Indikatorska lampica će treptati, što označava režim uparivanja.
3. On your device (computer, tablet, phone), navigate to Bluetooth settings and select "LOFREE Flow2" from the list of available devices to pair.

2.3 System Switch (Windows/macOS)

The Flow2 keyboard is compatible with both Windows/Android and macOS/iOS operating systems. You can switch between system layouts using the following key combinations:

• Za Windows / Android: Pritisnite i držite Fn + N.
• Za macOS / iOS: Pritisnite i držite fn+m.

3. Uputstvo za upotrebu

3.1 Side Touch Bar Functions

The LOFREE Flow2 features a side touch bar for quick adjustments to volume and screen brightness, as well as a lock function.

Opis slike: Detaljno view of the keyboard's right side, showcasing the touch-sensitive bar with visual indicators for volume, screen brightness, and a lock feature.

• Kontrola jačine zvuka: Swipe your finger up on the touch bar to increase volume, and swipe down to decrease it.
• Osvetljenost ekrana: Držite pritisnutu Fn key and swipe your finger up on the touch bar to increase screen brightness, or swipe down to decrease it.
• Funkcija zaključavanja: To prevent accidental touches, press and hold Fn + razmaknica for approximately 3 seconds to toggle the touch bar lock.

3.2 Postavke pozadinskog osvjetljenja

Adjust the keyboard's backlight to suit your preference.

• Promjena načina osvjetljenja: Pritisnite Fn + strelica lijevo or Fn + strelica udesno to cycle through different backlight modes (e.g., Steady On, Breathing, Off).
• Podesite svjetlinu: Pritisnite Fn + strelica gore to increase backlight brightness, and Fn + strelica nadole da ga smanji.

4. Keycap and Switch Management

The LOFREE Flow2 keyboard comes with pre-installed Mac keycaps and includes additional Windows keycaps for customization. The switches are hot-swappable, allowing for easy replacement.

Opis slike: The LOFREE Flow2 keyboard with several keycaps removed and placed beside it, illustrating the included Windows and macOS keycap options for system compatibility.

4.1 Swapping Keycaps

To change keycaps, use the included keycap puller:

1. Insert both ends of the keycap puller into the gaps on either side of the keycap you wish to remove.
2. Gently pull straight up until the keycap detaches.
3. For larger keycaps (e.g., Spacebar, Enter, Shift), pull from both sides separately to prevent damage to the stabilizers.
4. Poravnajte novu kapicu tipke s drškom prekidača i čvrsto pritisnite dok ne klikne na mjesto.

4.2 Uklanjanje prekidača

The Flow2 features hot-swappable switches. To remove a switch, use a switch puller (not included, but typically comes with switch sets):

1. First, remove the keycap as described above.
2. Align the switch puller with the clips on the top and bottom of the switch.
3. Gently squeeze the clips and pull the switch straight upward. Avoid twisting to prevent bending the pins.
4. To install a new switch, align its pins with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are straight before inserting.

Opis slike: A diagram illustrating the internal components of a Void Linear Switch, including the stem, spring, and housing, alongside a force curve graph detailing its operating and return points.

5. Specifikacije proizvoda

6. Otkrivanje problema

If you encounter issues with your LOFREE Flow2 keyboard, please refer to the following common solutions:

• Tastatura ne reaguje:
  • Ensure the power switch on the back is in the correct position for your chosen connection mode (Wired, BT, or 2.4G).
  • Provjerite nivo napunjenosti baterije. Povežite tastaturu putem USB-C priključka za punjenje.
  • For 2.4GHz, ensure the USB receiver is securely plugged in and you've pressed fn+4.
  • For Bluetooth, ensure your device's Bluetooth is on, the keyboard is in pairing mode (Fn + 1/2/3), and it's paired correctly in your device's settings.
  • Pokušajte ponovo pokrenuti računar i tastaturu.
• Pozadinsko osvjetljenje ne radi/prigušeno:
  • Podesite svjetlinu pomoću Fn + strelica gore/dolje.
  • Change lighting mode using Fn + strelica lijevo/desno.
  • Provjerite da li je baterija tastature dovoljno napunjena.
• Keys Not Registering Correctly (Windows/macOS):
  • Verify the correct system layout is selected (Fn + N for Windows/Android, fn+m for macOS/iOS).
  • If using QMK/VIA, ensure your custom layout is correctly loaded and active.
• Touch Bar Issues:
  • Ensure the touch bar is not locked. Press and hold Fn + razmaknica for 3 seconds to toggle the lock.

If these steps do not resolve your issue, please contact LOFREE customer support for further assistance.

7. Garancija i podrška

The LOFREE Flow2 keyboard is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For product support, technical assistance, or warranty claims, please visit the official LOFREE store or contact their customer service directly.

Official LOFREE Store: LOFREE trgovina na Amazonu