Antec AX65 ARGB PC Case Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Antec AX65 ARGB PC Case. Please read this manual thoroughly before beginning the assembly process to ensure proper installation and safe usage. Keep this manual for future reference.

Sigurnosne informacije

• Uvijek isključite napajanje iz zidne utičnice prije instaliranja ili uklanjanja bilo kakvih komponenti.
• Nosite antistatičku narukvicu kako biste spriječili oštećenje komponenti usljed elektrostatičkog pražnjenja (ESD).
• Handle all components with care.
• Držite male dijelove podalje od djece.
• Osigurajte odgovarajuću ventilaciju tokom rada kako biste spriječili pregrijavanje.

2. Sadržaj paketa

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or Antec support.

• Antec AX65 ARGB PC Case
• Kutija s priborom (vijci, vezice za kablove, odstojnici itd.)
• Korisnički priručnik (ovaj dokument)

3. Podešavanje i instalacija komponenti

3.1 Priprema

1. Unpack the PC case from its packaging.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off. Place it on a soft, flat surface to prevent scratches.
3. Remove the solid steel side panel by unscrewing the thumb screws at the rear and sliding it backward.
4. Gather necessary tools: Phillips head screwdriver, cable ties (some included in accessory box).

3.2 Instalacija matične ploče

1. Identify the correct standoff locations for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). Install any necessary additional standoffs from the accessory box.
2. Instalirajte I/O štitnik u zadnji otvor kućišta.
3. Pažljivo postavite matičnu ploču na odstojnike, poravnavajući rupe za vijke.
4. Pričvrstite matičnu ploču priloženim vijcima. Nemojte previše zategnuti.

3.3 Instalacija jedinice za napajanje (PSU).

1. Position the PSU into the dedicated compartment at the bottom rear of the case.
2. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards (if no bottom vent).
3. Secure the PSU to the rear of the case with the provided screws.

3.4 Instalacija diska za pohranu podataka

The AX65 supports both 2.5" SSDs and 3.5" HDDs.

• 2.5" SSD diskovi: Mount SSDs to the dedicated brackets behind the motherboard tray or on the PSU shroud. Secure with screws.
• 3.5" tvrdi diskovi: Install HDDs into the drive cage located under the PSU shroud. Slide the drive into the tray and secure it.

3.5 Expansion Card Installation (e.g., GPU)

1. Uklonite potrebne poklopce PCI-E utora sa stražnje strane kućišta.
2. Align your expansion card with the PCI-E slot on the motherboard.
3. Press firmly until the card is seated correctly.
4. Secure the card with the provided screw.

3.6 Upravljanje kablovima

Iskoristite izreze za usmjeravanje kablova i tačke za vezivanje iza ležišta matične ploče da biste organizovali kablove. Ovo poboljšava protok vazduha i estetiku.

3.7 Fan and Cooling Setup

The AX65 comes with three 120mm ARGB fans pre-installed at the front and one 120mm ARGB fan at the rear.

• Priključci ventilatora: Connect the 3-pin ARGB fan cables to your motherboard's ARGB headers or a compatible ARGB controller. Connect the fan power cables to available fan headers on your motherboard or a fan hub.
• Podrška za tečno hlađenje: The front panel supports radiators up to 360mm. The top panel supports up to two 120mm or 140mm fans, or a 240mm radiator.

4. Uputstvo za upotrebu

4.1 Uključivanje

After all components are installed and cables are connected, replace the side panels. Connect your monitor, keyboard, mouse, and power cable. Flip the switch on your PSU to the 'ON' position, then press the power button on the case's top I/O panel.

4.2 ARGB kontrola osvjetljenja

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) if connected to a compatible 3-pin 5V ARGB header. Refer to your motherboard manual for specific software instructions.

4.3 Prednja I/O ploča

The convenient top I/O panel provides easy access to essential ports and controls:

• Dugme za napajanje
• Reset dugme
• USB 3.0 port
• USB 2.0 portovi (x2)
• Priključak za slušalice
• Priključak za mikrofon

5. Održavanje

5.1 Čišćenje filtera za prašinu

Regular cleaning of dust filters is crucial for maintaining optimal airflow and cooling performance.

• Gornji magnetni filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with a soft brush or rinse with water (ensure it is completely dry before reattaching).
• Bottom Pull-out Filter: Slide out the dust filter located at the bottom of the case (under the PSU). Clean it similarly to the top filter.

5.2 Generalno čišćenje

Koristite meku, damp cloth to wipe down the exterior surfaces of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components and fan blades.

6. Otkrivanje problema

Ako naiđete na probleme, pogledajte sljedeće uobičajene korake za rješavanje problema:

• Nema napajanja: Ensure the PSU is switched on, the power cable is securely connected, and all internal power cables (24-pin, CPU, GPU) are properly seated. Check front panel power button connections to the motherboard.
• Ventilatori se ne okreću/ARGB ne svijetli: Verify fan power cables are connected to motherboard headers or a fan hub. Ensure ARGB cables are connected to a 3-pin 5V ARGB header and controlled via software. Check for loose connections.
• pregrijavanje: Ensure all fans are spinning correctly and oriented for proper airflow. Clean dust filters. Verify CPU cooler and GPU cooler are properly installed.
• Labave komponente: If experiencing intermittent issues, re-seat RAM, GPU, and other expansion cards. Check all cable connections.

For persistent issues, consult your component manuals or contact Antec customer support.

7. Specifikacije

8. Garancija i podrška

Antec products are designed and manufactured to the highest quality standards. For information regarding warranty coverage and technical support, please refer to the official Antec webweb-mjesto ili kontaktirajte lokalnog prodavača. Sačuvajte dokaz o kupovini za slučaj reklamacije.

For further assistance, visit the Antec support page: www.antec.com/support