1. Uvod i krajview
The DAB Evosta 2 is an electronic, low-energy consumption circulator pump designed for water circulation in various domestic heating and air conditioning systems. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Evosta 2 pump.
The Evosta 2 series combines the robustness of mechanical circulators with the advantages of electronic control. It features a synchronous permanent magnet motor, a frequency converter, and an efficiency index (EEI) of ≤ 0.18, ensuring high efficiency and reliability. Its compact design and comprehensive performance make it suitable for replacing older three-speed circulators.
2. Sigurnosne informacije
Važno: Read all safety instructions before installation or operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Instalaciju i održavanje mora obavljati isključivo kvalificirano osoblje.
- Ensure the power supply is disconnected before performing any work on the pump.
- The pump operates with hot liquids; allow it to cool before handling to prevent burns.
- Protect the pump from moisture and direct water spray.
- Ne koristite pumpu ako je oštećena ili ako je električni kabel pohaban.
- The pump is designed for clean, non-viscous, chemically neutral liquids. Do not use with flammable or corrosive liquids.
3. Opis i karakteristike proizvoda
The Evosta 2 circulator pump is engineered for optimal performance and durability. Key features include:
- Energetska efikasnost: Equipped with a synchronous permanent magnet motor and frequency converter, achieving an EEI ≤ 0.18.
- Robusna konstrukcija: Cast iron pump body with cataphoresis treatment, wet rotor motor, and ceramic shaft mounted on ceramic bushings lubricated by the pumped liquid.
- Integrisana zaštita: Internal motor protection eliminates the need for external overload protection.
- Kontrola prilagođena korisniku: A single sequential adjustment button on the control panel simplifies settings.
- Pristup za održavanje: Direct access to the crankshaft for potential unlocking.
- High Protection Rating: IPX5 stepen zaštite.
Pumpa casing is made of steel, with a technopolymer impeller. The rotor sleeve, stator sleeve, and closing flange are stainless steel. The thrust ring is graphite, and the sealing rings are EPDM. An air bleed plug made of brass is integrated.
4. Instalacija
Proper installation is crucial for the pump's performance and longevity. Follow these guidelines:
- Pozicija ugradnje: Install the pump with the motor axis horizontal.
- Priključci cijevi: The Evosta 2 40-70/130 is equipped with 1" (G 1") threaded connections. The 1/2" designation refers to the thread intended for connection to 1" to 1/2" reduced female fittings. Verify compatibility with your existing pipes or fittings.
- Napajanje: Connect the pump to a single-phase 1 x 230 V ~ 50/60 Hz power supply. Ensure the electrical installation complies with local regulations.
- Ispiranje sistema: Before starting the pump, ensure the system is thoroughly flushed to remove any debris that could damage the pump.
- Pročišćavanje zraka: The pump includes an integrated air bleed plug. After filling the system, open the plug to release any trapped air.
Refer to the dimensional drawings for precise measurements and connection details to ensure proper fitment within your system.
5. Operacija
The Evosta 2 pump features a control panel on the electronic control device cover, allowing for easy adjustment of its functions. The pump offers nine setting options, selectable via the MODE button.
- Odabir postavki: Press the MODE button to cycle through the available settings. The selected setting is indicated by six illuminated segments on the display.
- Načini rada: The pump supports various operating modes, typically including proportional pressure, constant pressure, and constant curve modes, to adapt to different system requirements.
Consult the specific icons or indicators on your pump's control panel to identify the active operating mode and adjust as needed for your heating or cooling system.
6. Održavanje
Regular maintenance ensures the long-term reliability and efficiency of your Evosta 2 pump.
- Pročišćavanje zraka: Periodically check and, if necessary, open the integrated brass air bleed plug to release any air trapped in the pump. This prevents cavitation and ensures smooth operation.
- Crankshaft Unlocking: In case of a blockage, the pump provides direct access to the crankshaft for manual unlocking. Refer to the technical diagrams for the exact location.
- čišćenje: Održavajte vanjski dio pumpe čistim i bez prašine i ostataka. Ne koristite abrazivna sredstva za čišćenje.
- Sistemska tečnost: Ensure the pumped liquid remains clean and free of solid substances and mineral oils. Glycol content should not exceed 30%.
- No Overload Protection Needed: Due to internal motor protection, no external overload protection is required.
7. Otkrivanje problema
If you encounter issues with your Evosta 2 pump, consider the following common problems and solutions:
- Pumpa se ne pokreće:
- Provjerite napajanje i prekidač.
- Ensure the pump is properly connected to the electrical mains.
- Verify that the motor is not seized. Use the direct access to the crankshaft to attempt manual unlocking if necessary.
- No Flow or Reduced Flow:
- Check for air in the system. Bleed air using the integrated plug.
- Inspect for blockages in the pipes or pump impeller.
- Ensure valves in the system are open.
- Verify the selected operating mode and setting are appropriate for the system's requirements.
- Neobična buka:
- Noise can indicate air in the system. Purge air.
- Check for foreign objects in the pump.
- Ensure the pump is securely mounted and not vibrating excessively.
If problems persist after attempting these solutions, contact qualified service personnel or DAB customer support.
8. Tehničke specifikacije
| Parametar | Vrijednost |
|---|---|
| Model | Evosta 2 40-70/130 |
| Broj dijela proizvođača | 60231855 |
| Operativni opseg | 0.4 – 3.6 m³/h with head up to 6.9 meters |
| Raspon temperature tekućine | 0 °C do +110 °C |
| Radni pritisak | 10 bara (1000 kPa) |
| Indeks zaštite | IPX5 |
| Klasa izolacije | F |
| Instalacija | Motor axis horizontal |
| Napajanje | 1 x 230 V ~ 50/60 Hz |
| Pumped Liquid | Clean, free of solids/mineral oils, non-viscous, chemically neutral, water-like (max 30% glycol) |
| Materijal kućišta pumpe | Lijevano željezo sa tretmanom kataforezom |
| Motor Casing Materijal | Čelik |
| Materijal radnog kola | Tehnopolimer |
| Materijal osovine | Keramika |
| Težina | 1.86 kg |
| Dimenzije paketa | 15 x 14 x 10 cm |
9. Garancija i podrška
The DAB Evosta 2 circulator pump comes with a 5 godine garancije, ensuring peace of mind regarding its quality and durability. This warranty covers manufacturing defects under normal use conditions.
For technical assistance, warranty claims, or spare parts inquiries, please contact your authorized DAB dealer or customer support. When contacting support, please have your model number (60231855) and purchase date available.
Information regarding the availability of spare parts is not provided in the product data. Please consult your dealer for specific spare part availability.
