BONTEC GDM7505 Ergonomski nosač za jedan monitor s plinskom oprugom Upute za uporabu

1. Uvod

Thank you for choosing the BONTEC GDM7505 Ergonomic Gas Spring Single Monitor Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before assembly and retain it for future reference.

2. Sigurnosne informacije

Molimo Vas da se pridržavate sljedećih sigurnosnih mjera opreza tokom instalacije i upotrebe:

• Prije sastavljanja provjerite jesu li sve komponente prisutne i neoštećene. Ne koristite ako bilo koji dio nedostaje ili je neispravan.
• This monitor mount is designed for screens between 15 and 34 inches, with a maximum weight capacity of 26.5 lbs (12 kg). Do not exceed these limits.
• The gas spring mechanism is under high pressure. Do not attempt to disassemble the gas spring cylinder.
• Always use appropriate tools and follow the instructions carefully. Overtightening screws may cause damage.
• Ensure the desk surface is stable and thick enough to support the mount and monitor weight.
• Držite djecu i kućne ljubimce podalje tokom instalacije.

3. Sadržaj paketa

Provjerite da li su svi dolje navedeni dijelovi uključeni u vaš paket:

Image: All components of the BONTEC Monitor Arm, including the main arm sections, base, C-clamp, grommet parts, various screws, and Allen keys, are displayed on a white surface.

• A: Upper Arm with VESA Plate
• A1: Cable Cover for Upper Arm
• B: Donja ruka
• C: Baza
• D: C-clamp
• E: Brace for C-clamp
• F: Small Screws (for C-clamp/Ušica)
• G: Wingnut (for Grommet)
• H: Carriage Bolt (for Grommet)
• I, J, K: Allen Keys (various sizes)
• L: Small Screws (for VESA plate)
• M-A, M-B, M-C, M-D, M-E: Monitor Screws and Washers (various sizes for VESA mounting)

4. Postavljanje i instalacija

This section guides you through the assembly process. An assembly video is available for visual reference.

4.1. Odaberite način montaže

The BONTEC GDM7505 supports two installation methods: C-clamp and Grommet Base. Select the method suitable for your desk.

Image: This image illustrates the two available installation methods: C-clamp mounting, suitable for desk thicknesses from 0.39 to 3.15 inches, and Grommet mounting, for desk thicknesses from 0.39 to 2.76 inches and hole diameters from 0.39 to 2.36 inches.

4.1.1. C-clamp Instalacija

1. Attach the Brace (E) to the Base (C) using the small screws (F).
2. Fix the C-clamp (D) to the Brace (E) and tighten the screws securely.
3. Place the assembled C-clamp onto your desk edge and tighten the clamp screw until the mount is stable. Use an Allen key for a more secure clamp.

4.1.2. Ugradnja podloge ušica

1. Remove the clip plate (D2) from the C-clamp (D) if it's attached.
2. Tighten the Carriage Bolt (H) to the Base (C).
3. Insert the bolt through the grommet hole in your desk.
4. Secure the base from underneath the desk using the clip plate (D2) and Wingnut (G).

4.2. Install the Arm onto the Base

1. Slide the Lower Arm (B) onto the pole of the installed Base (C).
2. Tighten the set screw on the Lower Arm (B) using the appropriate Allen key (I or J) to secure it.
3. Slide the Upper Arm (A) onto the Lower Arm (B).
4. Tighten the set screw on the Upper Arm (A) using the appropriate Allen key (I or J) to secure it.

4.3. Pričvrstite VESA ploču na monitor

1. Pažljivo postavite monitor licem prema dolje na meku, čistu površinu.
2. Align the VESA plate on the Upper Arm (A) with the mounting holes on the back of your monitor.
3. Insert the appropriate screws (M-A/M-B or M-C/M-D/M-E) and washers loosely, leaving a 3-4mm gap. Avoid using power tools to prevent damage.
4. Once all screws are in place, tighten them securely.

5. Uputstvo za upotrebu

The BONTEC GDM7505 monitor arm offers full motion adjustability for optimal viewudobnost.

Image: This diagram illustrates the extensive adjustability of the monitor arm, featuring a maximum height of 19.1 inches, a maximum extension of 23.3 inches, tilt angles from +85 to -50 degrees, swivel of +/-90 degrees, and 360-degree rotation for flexible monitor positioning.

5.1. Podešavanje nagiba

If the monitor head is dropping down, you may need to tighten the tilt screw. Use the appropriate Allen key (I or J) to turn the screw clockwise until the tilt adjustment is effective and smooth.

5.2. Podešavanje okretanja

If the monitor swivels too easily or is too sensitive, tighten the swivel screw. Use the appropriate Allen key (I or J) to turn the screw clockwise until the swivel adjustment is smooth and controlled.

5.3. Tension Adjustment (Gas Spring)

The gas spring tension needs to be adjusted according to your monitor's weight to ensure the arm stays balanced and holds its position.

• Monitor Drooping? If your monitor is too heavy for the current tension and droops, turn the tension screw counterclockwise to increase tension.
• Monitor Rising? If your monitor is too light for the current tension and rises, turn the tension screw clockwise to reduce tension.
• Adjust gradually, with a maximum of 20 turns in either direction. Test the arm's balance after every few turns.

5.4. Upravljanje kablovima

To maintain a clean and organized workspace, route your cables through the integrated cable management channels on the arm. Open the cable covers, place the cables inside, and snap the covers back into place.

Image: This image highlights the integrated cable management feature, demonstrating how power and data cables can be neatly routed through the arm's channels to keep the desk organized.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vašeg držača za monitor:

• Povremeno provjeravajte sve vijke i spojeve kako biste bili sigurni da su čvrsto zategnuti i sigurni.
• Clean the surface of the monitor arm with a soft, damp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
• If the arm's movement becomes stiff or loose over time, re-adjust the gas spring tension as described in Section 5.3.

7. Otkrivanje problema

If you encounter issues with your monitor arm, refer to the following common solutions:

8. Specifikacije

9. Garancija i podrška

For warranty information or technical support, please refer to the product packaging or contact BONTEC customer service directly. Contact details can typically be found on the manufacturer's official webweb-stranice ili putem vaše platforme za kupovinu.