1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your system components.
Figure 1: GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case, showcasing its panoramic design and illuminated ARGB fans.
2. Sigurnosne informacije
Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili oštećenje proizvoda ili ozljede sebe:
- Uvijek isključite napajanje iz zidne utičnice prije izvođenja bilo kakve instalacije ili održavanja.
- Handle internal components with care to avoid electrostatic discharge (ESD) damage. Consider using an anti-static wrist strap.
- Držite kućište dalje od vode, vlage i ekstremnih temperatura.
- Osigurajte odgovarajuću ventilaciju kako biste spriječili pregrijavanje.
- Do not attempt to open or repair the power supply unit (PSU) if it is integrated; refer to qualified service personnel.
- Držite male dijelove i vijke van dohvata djece.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case
- Kutija s priborom (sadrži vijke, vezice za kablove i druge sitne dijelove)
- Korisnički priručnik (ovaj dokument)
- Pre-installed ARGB Fans (2 x 120mm side, 1 x 120mm rear)
4. Identifikacija komponente
Familiarize yourself with the various parts of the GAMDIAS Aura GC10m V2 case:
Slika 2: Prednja strana view kućišta, ističući ploču od kaljenog stakla.
Slika 3: Pozadi view of the case, indicating motherboard I/O cutout, expansion slots, and rear fan mount.
Figure 4: Top I/O Panel featuring USB Type-C, USB 2.0, HD Audio, and LED switch button.
Ključne komponente:
- Paneli od kaljenog stakla: Front and side panels for component visibility.
- I/O portovi: Located on the top panel, includes 1x USB Type-C, 1x USB 2.0, HD Audio, and an LED switch button.
- Fan Mounts: Multiple locations for cooling fans and radiators (Top, Side, Bottom, Rear).
- Prostori za pogone: Dedicated spaces for 3.5" HDDs and 2.5" SSDs.
- Slotovi za proširenje: For graphics cards and other PCIe devices.
5. Vodič za postavljanje
Follow these steps for proper installation of your PC components:
5.1. Priprema slučaja
- Postavite kućište na ravnu, stabilnu površinu.
- Carefully remove the tempered glass side panel by unlatching the simple clasp mechanism.
Figure 5: Removing the tempered glass side panel using the clasp mechanism.
5.2. Instalacija matične ploče
- Install the I/O shield (if not pre-attached to your motherboard) into the rear opening of the case.
- Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
- Pričvrstite matičnu ploču odgovarajućim vijcima iz kutije s priborom.
5.3. Instalacija jedinice za napajanje (PSU)
- Locate the PSU mounting area, typically at the rear bottom of the case.
- Umetnite napajanje na mjesto i pričvrstite ga vijcima sa stražnje strane kućišta.
5.4. Instalacija pogona za pohranu podataka
- For 3.5" HDDs: Install into the designated HDD cage.
- For 2.5" SSDs: Mount onto the dedicated 2.5" drive bays.
- Secure drives with screws.
5.5. Instalacija grafičke kartice (VGA) i kartice za proširenje
- Uklonite potrebne poklopce za utore za proširenje sa stražnje strane kućišta.
- Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
- Pričvrstite kartice vijcima.
5.6. Ugradnja ventilatora i radijatora
Kućište podržava različite konfiguracije ventilatora i radijatora:
- Vrh: Up to 3 x 120mm or 2 x 140mm fans; Radiator up to 360mm or 280mm.
- strana: Up to 2 x 120mm or 2 x 140mm fans; Radiator up to 240mm.
- dno: Up to 3 x 120mm or 2 x 140mm fans.
- pozadi: 1 x 120mm or 1 x 140mm fan; Radiator up to 120mm.
Figure 6: Cooling support diagram for fan and radiator placement.
5.7. Upravljanje kablovima
Iskoristite izreze za usmjeravanje kablova i tačke za vezivanje iza ležišta matične ploče da biste organizovali kablove. Ovo poboljšava protok vazduha i estetiku.
6. Operacija
6.1. Uključivanje
After all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the top I/O panel to start your system.
6.2. ARGB kontrola rasvjete
The pre-installed ARGB fans can be controlled via the dedicated LED switch button on the top I/O panel. Press the button to cycle through various lighting modes and colors. For advanced synchronization with other ARGB components, connect the case's ARGB header to a compatible motherboard's 5V 3-pin ARGB header and use the motherboard's software.
7. Održavanje
7.1. Čišćenje
- Regularly clean dust filters to maintain optimal airflow.
- Koristite meku, suhu krpu za brisanje vanjskih površina.
- For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged.
7.2. Održavanje ventilatora
Periodically check fan blades for dust buildup. Clean them gently with a soft brush or compressed air. Ensure fans are securely mounted and free from obstructions.
8. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti:
| Issue | Mogući uzrok | Rješenje |
|---|---|---|
| Sistem se ne uključuje | Labavi kablovi za napajanje, neispravan PSU, nepravilni priključci na prednjoj ploči. | Check all power connections (PSU to wall, PSU to motherboard/components). Verify front panel header connections to the motherboard. Test PSU if possible. |
| ARGB fans not lighting up | ARGB cables disconnected, incorrect ARGB header connection, faulty fan/controller. | Ensure ARGB cables are securely connected to the controller or motherboard's 5V 3-pin ARGB header. Use the LED switch button. Check motherboard software. |
| Poor airflow/high temperatures | Dust buildup, incorrect fan orientation, insufficient fans. | Clean dust filters and fans. Ensure fans are oriented correctly (intake/exhaust). Consider adding more fans if needed. |
| Side panel difficult to close | Cables obstructing, components not fully seated. | Re-route cables for better management. Ensure all components are fully seated and not protruding. |
9. Tehničke specifikacije
Detailed specifications for the GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case:
Slika 7: Gotovoview of key technical specifications.
| Feature | Specifikacija |
|---|---|
| Tip slučaja | Micro-Tower |
| Podrška za matičnu ploču | Micro-ATX, Mini-ITX |
| Dimenzije (DxŠxV) | 42 x 29 x 36.5 cm |
| Težina artikla | 5 kg |
| I/O portovi | 1x USB Type-C, 1x USB 2.0, HD Audio, 1x LED Switch Button |
| Drive Bays | 1 x 3.5" or 1 x 2.5" (HDD Cage), 3 x 2.5" |
| Unaprijed instalirani ventilatori | 2 x 120mm ARGB (Side), 1 x 120mm ARGB (Rear) |
| Podrška ventilatora (maks.) | Top: 3x120mm/2x140mm, Side: 2x120mm/2x140mm, Bottom: 3x120mm/2x140mm, Rear: 1x120mm/1x140mm |
| Nosač radijatora (maks.) | Top: 360mm/280mm, Side: 240mm, Rear: 120mm |
| Ograničenje visine CPU hladnjaka | 165mm |
| Ograničenje dužine VGA | 400mm |
| Ograničenje dužine napajanja | 160mm |
| RGB Sync | 5V 3-pinski adresabilni priključak |
10. Garancija i podrška
For warranty information and technical support, please refer to the official GAMDIAS webweb-mjesto ili kontaktirajte lokalnog prodavača. Sačuvajte dokaz o kupovini za slučaj reklamacije.
Proizvođač: GAMDIAS TAIWAN, No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
Uvoznik (Indija): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi, Bengaluru- 560004, Contact -8904307700
