KaiDi KDYJT006-20 Uputstvo za upotrebu za zamjenu aktuatora motora za podizanje naslona

Model: KDYJT006-20

1. Uvod

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your KaiDi KDYJT006-20 Power Lift Recliner Actuator Motor. Please read this manual thoroughly before installation and retain it for future reference.

2. Sigurnosne informacije

Always disconnect power to the recliner before attempting any installation, maintenance, or repair.
Ensure all connections are secure and correctly oriented to prevent electrical hazards.
Do not operate the actuator beyond its specified load capacity (Max Load 800N).
Avoid operating the actuator continuously beyond its rated duty cycle (2 minutes ON, 18 minutes OFF, 10%).
Use only the specified KD Power Supply.
Držite ruke i labavu odjeću dalje od pokretnih dijelova tokom rada.
Ako niste sigurni u vezi s bilo kojim korakom, obratite se kvalificiranom tehničaru.

3. Šta se nalazi u kutiji

1 x KaiDi KDYJT006-20 Power Lift Recliner Actuator Motor

Note: Power supply and remote control are typically sold separately or are part of the existing recliner system.

4. Postavljanje i instalacija

Važno: Before proceeding, ensure the recliner is unplugged from the power outlet.

Identify the Old Actuator: Locate the existing actuator motor under your recliner. Note how it is mounted and connected.
Disconnect Power and Remote: Carefully disconnect the 2-pin round power connector and the 5-pin remote port connector from the old actuator.
Uklonite stari aktuator: Unbolt or unclip the old actuator from its mounting points on the recliner frame. Keep any mounting hardware.
Compare Actuators: Compare the new KaiDi KDYJT006-20 actuator with the old one. Verify that the stroke length (266mm) and mounting points are compatible.
Instalirajte novi aktuator: Mount the new actuator into the recliner frame using the original hardware or suitable replacements. Ensure it is securely fastened.
Connect Power and Remote:
- Povežite 2-pin round power connector from your power supply to the corresponding port on the new actuator.
- Povežite 5-pin remote port connector from your hand control to the corresponding port on the new actuator.
Upravljanje kablovima: Route all cables safely to prevent pinching or damage during recliner operation.

KaiDi KDYJT006-20 Actuator Motor with cables

Figure 1: KaiDi KDYJT006-20 Actuator Motor with its power and remote connectors. This image shows the overall appearance of the actuator and its wiring.

Close-up of KaiDi KDYJT006-20 Actuator Motor label

Slika 2: Krupni plan view of the product label on the KaiDi KDYJT006-20 actuator, displaying model number, specifications, and safety warnings. Verify these details match your requirements.

Close-up of 5-pin remote connector and 2-pin power connector

Slika 3: Detaljno view of the 5-pin remote control connector and the 2-pin round power connector. Ensure these match your existing recliner's connections.

5. Uputstvo za upotrebu

Uključeno: Once the actuator is securely installed and all connections are made, plug the recliner's power cord into a wall outlet.
Probni rad: Use the recliner's hand control to slowly extend and retract the actuator. Observe for smooth movement and listen for any unusual noises.
Puni opseg pokreta: Test the recliner through its full range of motion to ensure the actuator operates correctly and does not bind or interfere with any parts of the recliner mechanism.
Radni ciklus: Remember the duty cycle of 2 minutes ON and 18 minutes OFF. Avoid continuous operation to prevent overheating and damage.

6. Održavanje

Redovni pregled: Periodically inspect the actuator and its mounting points for any signs of wear, damage, or loose connections.
čišćenje: Keep the actuator free from dust and debris. Wipe with a dry cloth. Do not use liquid cleaners directly on the motor or electrical components.
podmazivanje: The actuator is generally maintenance-free regarding internal lubrication. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.
Provjera kablova: Ensure all cables are intact and not frayed or pinched.

7. Otkrivanje problema

Problem	Mogući uzrok	Rješenje
Aktuator se ne pomiče.	No power to the recliner. Labav ili nepravilan priključak za napajanje. Faulty hand control. Actuator motor failure.	Check if the recliner is plugged in and the outlet has power. Verify the 2-pin power connector is securely attached. Test with a known working hand control if available. Contact customer support if motor failure is suspected.
Actuator moves slowly or with difficulty.	Overload on the recliner. Binding in the recliner mechanism. Low voltage iz napajanja.	Reduce weight on the recliner. Inspect the recliner mechanism for obstructions or damage. Ensure the power supply is providing adequate voltage (29V DC).
Neuobičajeni zvukovi tokom rada.	Labavi pribor za montažu. Internal actuator issue. Interference with recliner frame.	Check and tighten all mounting bolts. Inspect for any parts rubbing against the actuator. Ako buka i dalje postoji, prekinite korištenje i kontaktirajte podršku.

8. Specifikacije

Feature	Detalj
Model	KDYJT006-20
Stroke Length	266mm
Brzina	36mm/s
Max Load	800N
Nazivni ulazni voltage	DC 29V
Power Connection	2-pin round connector
Remote Connection	5-pin port connector
Duty Cycle	2 minutes ON, 18 minutes OFF (10%)
Proizvođač	Kaidi

9. Garancija i podrška

For warranty information or technical support, please refer to the documentation provided with your original recliner or contact the retailer from whom you purchased this replacement actuator. Ensure you have your model number (KDYJT006-20) and purchase details available when contacting support.

For further assistance, you may visit the KaiDi Store on Amazon: KaiDi Store

	KAIDI KDDYM002A+ KDHM003A+ specifikacija funkcije Ovaj dokument detaljno opisuje specifikaciju funkcija za kontrolne sisteme KAIDI KDDYM002A+ i KDHM003A+, uključujući dijagrame povezivanja sistema, funkcije ručnog kontrolera, metode uparivanja i odspajanja i važne napomene o radu.
	KDDYM002B + KDH144 Funkcionalni priručnik: Sistem za električnu kontrolu kreveta Ovaj funkcionalni priručnik pruža detaljna uputstva za kontrolne sisteme KAIDI KDDYM002B i KDH144, obuhvatajući specifikacije, konfiguraciju sistema, funkcije ručnog kontrolera, uparivanje, brisanje, fabričko resetovanje i mere predostrožnosti za primenu električnih kreveta.
	KDDY036-Y003 + KDH139-012 Funkcija Specifikacija Specifikacija funkcija i upute za upotrebu za sistem kontrolne kutije KDDY036-Y003 + KDH139-012, s detaljnim dijagramima povezivanja, funkcijama ručnih tipki, metodama uparivanja i važnim sigurnosnim razmatranjima.
	KAIDI Uputstvo za upotrebu sistema kontrolne kutije za jedan krevet sa 19 tipki - KDH283C Sveobuhvatni korisnički priručnik za KAIDI sistem kontrolne kutije za jedan krevet sa 19 tipki (KDH283C). Saznajte više o podešavanju sistema, komponentama, funkcijama daljinskog upravljača, specifikacijama performansi i sigurnosnim smjernicama.
	KAIDI KDDY036-Y003 + KDH139-012 Funkcionalnost, specifikacija i korisnički priručnik User manual and function specification for the KAIDI KDDY036-Y003 and KDH139-012 control system by Changzhou Kaidi Electrical Co., Ltd. Details system connection, hand controller functions, pairing methods, and important operational notes.
	KDDY109C(B) + KDH281 Funkcijski priručnik za sisteme s jednim upravljanjem i sisteme sa šest upravljanja Ovaj priručnik pruža detaljna uputstva za kontrolnu kutiju KDDY109C(B) i ručni kontroler KDH281, koja obuhvataju konfiguraciju sistema, funkcije ručnog kontrolera, uparivanje, fabričko resetovanje i mere predostrožnosti za upotrebu sa električnim krevetima.