Reboot Plasma Cutter RBC6000DL PILOT ARC 120/240V Instruction Manual

1. Važne informacije o sigurnosti

WARNING: Plasma cutting involves high voltage, high temperatures, and intense light. Failure to follow safety precautions can result in serious injury or death.

• Always wear appropriate Personal Protective Equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, heavy-duty gloves, and safety glasses.
• Ensure adequate ventilation to avoid inhaling fumes and gases produced during cutting.
• Keep a fire extinguisher nearby. Sparks and molten metal can cause fires.
• Do not operate the plasma cutter in damp ili vlažnim uslovima.
• Ensure the workpiece is properly grounded.
• Držite djecu i neovlašteno osoblje podalje od radnog područja.
• Pročitajte i razumite cijeli priručnik prije upotrebe mašine.

2. Proizvod je gotovview

The Reboot RBC6000DL is a 60-amp dual voltage (120V/240V) plasma cutter featuring non-touch pilot arc technology. It is designed for efficient and precise cutting of various metals, suitable for both beginners and small business projects.

• Pilotni luk bez dodira: High-frequency arc starting eliminates the need for the torch head to touch the metal, reducing slag and extending consumable life.
• Snažne performanse rezanja: Equipped with upgraded electrodes and an AG60 cutting torch, offering enhanced cutting power and precision.
• Dual Voltage Mogućnost: Operates on both 120V and 240V power sources, providing versatility for different work environments.
• IGBT inverterska tehnologija: Ensures stable and efficient cutting performance.

Image: The Reboot RBC6000DL Plasma Cutter, showcasing its compact design, cutting torch, and included accessories.

Image: The plasma cutter in operation, illustrating its high-frequency, IGBT technology, dual voltage, and strong heat dissipation features.

3. Komponente i pribor

The RBC6000DL plasma cutter comes with the following components and accessories:

• RBC6000DL Plasma Cutter Machine
• Plasma Torch (AG60, 13.2 FT)
• Zemlja Clamp
• Power Adapter (for 120V/240V connection)
• Air Filter Regulator (pre-installed)
• Gas-Pressure Meter
• Air Hose
• Electrodes (consumables)
• Nozzles (consumables)
• Korisnički priručnik (ovaj dokument)

Image: A visual representation of the plasma cutter and its included accessories, such as the torch, earth clamp, power adapter, and consumables.

Panel Introduction

Familiarize yourself with the controls and indicators on the plasma cutter's front and rear panels.

Slika: Detaljna view of the plasma cutter's front and rear panels, labeling key components like the digital display, current adjust knob, torch connectors, air input, and air filter regulator.

4. Upute za postavljanje

The RBC6000DL is designed for quick setup. Follow these steps to prepare your machine for operation:

1. Raspakirajte: Pažljivo izvadite sve komponente iz pakovanja.
2. Spojite kompresor zraka: The unit comes with a pre-installed air filter regulator. Connect your air compressor to the air input connector on the rear panel. Ensure the air pressure is within the recommended range of 30-60 PSI, with a maximum of 90 PSI. Recommended compressor specifications: 250L/min, 2.2 kW or above.
3. Connect Earth Clamp: Pričvrstiti uzemljenje clamp cable to the designated connector on the front panel. Securely clamp zemlja klamp na radni komad ili čisti, goli metalni dio radnog stola.
4. Connect Plasma Torch: Connect the AG60 plasma torch to the appropriate connectors on the front panel.
5. Priključak za napajanje: Connect the power cable to either a 120V or 240V power outlet using the provided adapter if necessary. Ensure the power source matches the machine's voltage postavka.
6. Uključi: Flip the power switch to the 'ON' position. The digital display should illuminate.

Image: The rear panel of the plasma cutter, highlighting the pre-installed air filter regulator for easy air compressor connection.

5. Uputstvo za upotrebu

Once the machine is set up, follow these guidelines for effective plasma cutting:

1. Podesite struju: Use the current adjust knob on the front panel to set the desired amperage based on the material thickness and type.
2. Podesite pritisak zraka: Verify the air pressure on the gauge is within the recommended operating range (30-60 PSI).
3. Inicijacija luka: Position the torch nozzle approximately 1/8 to 1/4 inch above the workpiece. Press the torch trigger to initiate the pilot arc. The non-touch pilot arc will start without needing to contact the metal.
4. Započnite rezanje: Once the pilot arc is established, move the torch steadily across the material. Maintain a consistent speed and distance for a clean cut.
5. Cutting Thickness Guidelines:
   • 240V Rad:
     • Clean Cut: Up to 1/2 inch (12mm)
     • Max Severance Cut: Up to 4/5 inch (20mm)
   • 120V Rad:
     • Clean Cut: Up to 3/8 inch (9.5mm)
     • Max Severance Cut: Up to 1/2 inch (12mm)
6. Cutting Various Materials: The RBC6000DL is capable of cutting stainless steel, mild steel, carbon steel, copper metal, aluminum alloy, and iron metal.

Image: A visual guide demonstrating the maximum severance cut of 5/8 inch and clean cut of 1/2 inch when operating at 240V.

Slika: pramples of the plasma cutter being used to cut different types of metal, including stainless steel, mild steel, carbon steel, aluminum alloy, copper, and iron.

6. Održavanje

Regular maintenance ensures optimal performance and extends the lifespan of your plasma cutter.

• Potrošni materijal: Regularly inspect and replace electrodes and nozzles as they wear out. Worn consumables can lead to poor cut quality and reduced efficiency.
• Regulator filtera zraka: Periodically drain any accumulated moisture from the air filter regulator bowl. Clean or replace the filter element if it becomes clogged or dirty.
• čišćenje: Keep the machine clean and free from dust and metal particles. Use compressed air to blow out internal components, ensuring the cooling fan operates effectively.
• Kablovi i priključci: Prije svake upotrebe provjerite sve kablove i spojeve na oštećenja ili labave spojeve.

7. Otkrivanje problema

If you encounter issues with your plasma cutter, refer to the following common troubleshooting steps:

• Nema napajanja:
  • Check power cable connections and ensure it is securely plugged into a functional outlet.
  • Provjerite je li prekidač za napajanje u položaju 'UKLJUČENO'.
  • Check the circuit breaker for the power outlet.
• Bez luka:
  • Osigurati uzemljenje klamp is securely attached to a clean, bare metal surface on the workpiece.
  • Check that the plasma torch is properly connected.
  • Inspect torch consumables (electrode, nozzle) for wear and replace if necessary.
  • Verify adequate air pressure is supplied to the machine.
• Poor Cut Quality / Excessive Slag:
  • Replace worn-out consumables (electrode, nozzle).
  • Adjust cutting speed and torch distance from the workpiece.
  • Osigurajte ispravnost amperage setting for the material thickness.
  • Check air pressure for optimal flow.
• Overheat Indicator On:
  • Allow the machine to cool down. The fan will continue to run.
  • Ensure proper ventilation around the machine and that cooling vents are not obstructed.
  • Smanjite radni ciklus ili vrijeme rezanja.

For persistent issues, please contact Reboot customer support.

8. Specifikacije

Technical specifications for the Reboot RBC6000DL Plasma Cutter:

Image: Visual representation of the plasma cutter's dimensions (12 inches length, 8.86 inches height, 4.33 inches width) and weight (3.7 KG).

9. Garancija i podrška

The Reboot RBC6000DL Plasma Cutter typically includes a 1 godine garancije od datuma kupovine, pokrivajući nedostatke u proizvodnji.

For warranty claims, technical assistance, or any questions regarding the operation or maintenance of your plasma cutter, please contact Reboot customer support directly. Refer to the contact information provided with your product packaging or visit the official Reboot webstranica za detalje o podršci.