1. Uvod
The Intelbras IVP 7000 SMART EX is a wireless passive infrared (PIR) motion sensor designed for robust and reliable intrusion detection. It incorporates advanced signal analysis technology to ensure efficient detection while minimizing false alarms. This sensor is particularly suited for outdoor environments and areas with a high risk of intrusion, offering enhanced security for your property.
This manual provides detailed instructions for the installation, operation, and maintenance of your IVP 7000 SMART EX sensor. Please read it carefully before proceeding with installation and use.
2. Ključne karakteristike
- Imunitet za kućne ljubimce: Designed to ignore pets weighing up to 30 kg (approximately 66 lbs), reducing false alarms caused by animals.
- Dual PIR Detection: Utilizes two passive infrared sensors for more accurate and reliable motion detection.
- Podesiva osjetljivost PIR-a: Allows customization of detection sensitivity to suit specific environmental conditions.
- LED indikator statusa: Provides visual feedback on detection events and sensor status.
- Anti-TampPrebaci prekidač: Triggers an alarm if the sensor cover is opened or the unit is forcibly removed from its mounting location.
- Articulated Mounting Bracket: Includes a flexible bracket for easy and precise positioning during installation.
- Indikacija slabe baterije: Notifies users when the battery level is low, ensuring continuous operation.
- optički filter: Enhances detection accuracy and reduces interference from external light sources.
3. Postavljanje i instalacija
Proper installation is crucial for optimal performance of your IVP 7000 SMART EX sensor. Follow these steps carefully.
3.1 Raspakivanje i provjera komponenti
Prije instalacije, provjerite da li su sve komponente prisutne:
- IVP 7000 SMART EX Sensor Unit
- Articulated Mounting Bracket
- Vijci i zidni tiplovi za montažu
- Korisnički priručnik (ovaj dokument)
3.2 Instalacija baterije
The sensor operates on batteries (type not specified, typically 3V lithium). Open the sensor casing carefully to access the battery compartment. Insert the batteries, observing the correct polarity (+/-). Close the casing sigurno.
3.3 Odabir mjesta montaže
Odaberite mjesto za montažu koje pruža nesmetan view of the area to be protected. Avoid aiming the sensor directly at heat sources, reflective surfaces, or areas with strong air currents. For outdoor use, consider protection from direct rain and sunlight, although the sensor is designed for outdoor environments.
Slika 1: Prednja strana view of the IVP 7000 SMART EX sensor, showing the PIR lens and Intelbras branding.
Slika 2: Bočna strana view of the IVP 7000 SMART EX sensor, illustrating its profile and weather-resistant design.
3.4 Fizička montaža
- Attach the articulated mounting bracket to the desired wall or surface using the provided screws and wall plugs. Ensure it is firmly secured.
- Mount the IVP 7000 SMART EX sensor onto the articulated bracket.
- Adjust the sensor's angle using the bracket to cover the intended detection area.
Slika 3: Natrag view of the IVP 7000 SMART EX sensor, highlighting the mounting points for the articulated bracket.
3.5 Pairing with Control Panel (Wireless Configuration)
Refer to your security system's control panel manual for specific instructions on how to pair a new wireless sensor. Generally, this involves putting the control panel into 'learning' mode and then triggering the sensor (e.g., by opening the tamper switch or walking in front of it) to register it with the system.
3.6 PIR Sensitivity Adjustment
The sensor features adjustable PIR sensitivity. Consult the internal dip switches or potentiometer (if present) inside the sensor casing to fine-tune the detection range and responsiveness. Test the sensor after adjustment to ensure optimal performance and pet immunity.
4. Uputstvo za upotrebu
Once installed and configured, the IVP 7000 SMART EX operates automatically to detect motion.
4.1 Detekcija pokreta
The dual PIR sensors detect changes in infrared radiation caused by movement of warm bodies. When motion is detected within its coverage area, the sensor transmits a signal to the connected control panel.
4.2 LED indikator
The LED indicator on the sensor provides visual feedback:
- Brief Flash: Indicates motion detection.
- Continuous Light/Specific Pattern: May indicate low battery or a tamper event (refer to specific model documentation for exact patterns).
4.3 Pet Immunity
The pet immunity feature allows pets up to 30 kg to move freely within the detection zone without triggering an alarm. For this feature to work effectively, ensure the sensor is mounted at the recommended height and its sensitivity is correctly adjusted, as described in the setup section.
5. Održavanje
Regular maintenance ensures the longevity and reliable operation of your sensor.
- čišćenje: Periodically clean the sensor lens with a soft, dry cloth to remove dust, dirt, or cobwebs that could obstruct detection. Do not use abrasive cleaners or solvents.
- Zamjena baterije: When the low battery indicator activates, replace the batteries promptly. Use only recommended battery types.
- Redovne provjere: Test the sensor periodically (e.g., monthly) by walking through its detection zone to ensure it is functioning correctly and communicating with the control panel.
- TampPrebaci prekidač: Osigurajte da senzor casing is always securely closed to prevent tamper alarmi.
6. Otkrivanje problema
If you encounter issues with your IVP 7000 SMART EX sensor, refer to the following common problems and solutions.
- Lažni alarmi:
- Check for heat sources (heaters, direct sunlight) or strong air currents (vents, open windows) in the detection zone.
- Adjust PIR sensitivity to a lower setting.
- Ensure pet immunity is correctly configured and pets are within the specified weight limit.
- Očistite sočivo senzora.
- Nema detekcije:
- Verify batteries are correctly installed and not depleted. Replace if necessary.
- Check if the sensor is properly paired with the control panel.
- Osigurajte da područje detekcije nema prepreka.
- Increase PIR sensitivity if needed.
- Indikacija slabe baterije:
- Replace the batteries immediately with new ones of the correct type.
- Tamper Alarm:
- Osigurajte da senzor casing je potpuno zatvoren i osiguran.
- Check if the sensor is firmly mounted to prevent accidental removal.
7. Specifikacije
| Proizvođač | Intelbras (Generic in listing, but Intelbras on product) |
| Model | IVP 7000 SMART EX |
| Boja | Bijelo |
| Vrsta izvora napajanja | Electric Power (typically battery-operated for wireless sensors, with electric power referring to the system it connects to) |
| Voltage | 12V (likely for the system, sensor itself uses lower voltage batteries) |
| Broj proizvoda | 1 |
| Vrsta montaže | Zidni nosač |
| Dimenzije proizvoda (D x Š x V) | 10 cm x 10 cm x 2 cm (3.94 x 3.94 x 0.79 inča) |
| Pet Immunity | Do 30 kg |
| Tip otkrivanja | Dual PIR (Passive Infrared) |
| Posebne karakteristike | Adjustable PIR Sensitivity, LED Status Indicator, Anti-Tamper Switch, Optical Filter |
8. Informacije o garanciji
This product is covered by a standard manufacturer's warranty. For specific details regarding warranty duration, coverage, and claims process, please refer to the warranty card included with your purchase or visit the official Intelbras webSačuvajte dokaz o kupovini radi provjere garancije.
9. Podrška
For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact Intelbras customer support. Contact information can typically be found on the manufacturer's webweb-mjestu ili na ambalaži proizvoda.
Online resursi: Visit the Intelbras official webstranica za često postavljana pitanja, ažurirane priručnike i preuzimanje softvera.
Služba za korisnike: Refer to your product packaging or the Intelbras webstranica za telefonske brojeve i podršku putem e-pošte.
