AstroAI M12-F 5000A Jump Starter with Air Compressor User Manual

1. Uvod i ostaloview

The AstroAI M12-F is a powerful and versatile tool designed for automotive emergencies and maintenance. It integrates a 5000A peak current jump starter, a 150 PSI smart tire inflator, a portable charger, and a professional illumination system into a single, dependable unit. Equipped with 10 comprehensive safety protections, this device ensures security and peace of mind for outdoor adventures, roadside emergencies, and daily commutes.

2. Značajke proizvoda

2.1. Surging Power for Every Need

The AstroAI M12-F delivers a 5000A peak current, capable of quickly reviving all gas engines and 10L diesel 12V batteries. It can jumpstart a wide range of vehicles, including lawn mowers, motorboats, motorbikes, cars, SUVs, and ATVs. The device performs reliably in extreme temperatures ranging from -4°F (-20°C) to 122°F (50°C).

AstroAI M12-F Jump Starter operating in extreme temperatures from -20°C to 50°C. — Figure 1: The AstroAI M12-F is designed to operate effectively in a wide range of temperatures, from freezing cold to extreme heat.

2.2. Smart Inflation System

Featuring a 19mm cylinder and smart pressure control technology, the inflator can inflate a 195/65R15 tire from 30 PSI to 36 PSI in approximately 70 seconds. The included 60cm extension hose and 4 professional nozzles accommodate various inflation needs for tires, balls, and air cushions. Note: This system is not suitable for high-pressure or large-volume inflatables such as swim rings or air canoes.

AstroAI M12-F Jump Starter inflating a car tire, showing increased inflation speed. — Figure 2: The smart inflation system quickly inflates tires, displaying real-time pressure on the screen.

2.3. Programmable Inflation

Use the 'M' button to switch between pressure units (PSI, kPa, BAR). Press the '+' and '-' buttons to set a desired pressure between 3 and 150 PSI. The inflator will automatically shut off once the preset pressure is reached, preventing overinflation. Smart temperature control keeps the device within a safe operating range. For optimal performance, allow the device to rest for 10–15 minutes after each 10–15 minutes of continuous use.

AstroAI M12-F Jump Starter with auto-shutoff feature for tire inflation. — Figure 3: The auto-shutoff feature ensures precise inflation and prevents over-pressurization.

2.4. Power Bank for Double Support

The USB-A 18W PD quick charge system provides 5V, 9V, or 12V output, suitable for charging phones, tablets, headphones, watches, and other electronic devices. Its high-capacity battery cells and the Type-C port offer both input and output functionality, allowing the device to serve as a power bank while also being rechargeable.

AstroAI M12-F Jump Starter charging various electronic devices via USB-A and USB-C. — Figure 4: The device functions as a versatile power bank, keeping your essential electronics charged on the go.

2.5. All-Round Safety Protection System

A smart chip provides 10 comprehensive safety protections: reverse polarity, overcurrent, overcharge, over-discharge, high/low temperature, reverse connection, overvoltage, overload, short circuit, and spark-proof protection. These features ensure safe operation and protect against common errors or hazards.

AstroAI M12-F Jump Starter highlighting its 10 safety protections. — Figure 5: The integrated smart chip offers multiple layers of protection for secure and reliable use.

2.6. Professional-Quality Accessory Kit & LED Light

The device includes a pro-level LED light with three modes: illumination (steady light), strobe (flashing light), and SOS (Morse code signal). This provides versatile lighting for various situations. The product comes with a smart battery clamp, one USB cable, and a set of professional inflation accessories (one extension hose and four air nozzles). All accessories can be neatly stored in the included EVA storage box for organization and easy access.

AstroAI M12-F Jump Starter showing its 3-in-1 emergency flashlight modes: flashlight, strobe, and SOS. — Figure 6: The multi-mode LED flashlight provides essential illumination and signaling capabilities.

3. Setup & Initial Charging

Before first use, fully charge the AstroAI M12-F using the provided USB-C cable. Connect the USB-C cable to the device's Type-C port and the other end to a suitable USB power adapter (not included). The display will indicate the charging status. Ensure the device is fully charged for optimal performance, especially before storing it or taking it on a trip.

AstroAI M12-F Jump Starter with all its components, including the charging cable and smart clamps. — Figure 7: The AstroAI M12-F comes with essential accessories for immediate use.

4. Uputstvo za upotrebu

4.1. Paljenje vozila pomoću kablova

Poveži pametni Clamps: Priključite pametni utikač za baterijeamp into the jump starter's port.
Pričvrstite na bateriju: Spojite crveni clamp na pozitivni (+) pol akumulatora vozila i crni clamp na negativni (-) terminal. Osigurajte sigurnu vezu.
Provjerite indikator: Verify that the indicator light on the smart clamp illuminates green, indicating a correct connection and readiness to jump start. If no light or a red light appears, check connections and polarity.
Pokreni vozilo: Pokrenite motor vašeg vozila.
Prekini vezu: Once the engine starts, immediately remove the smart clamps from the vehicle battery, then disconnect them from the jump starter.

Four-step guide on how to easily jump start a car using the AstroAI M12-F Jump Starter. — Figure 8: Follow these simple steps to safely jump start your vehicle.

Video 1: This video demonstrates the process of using the jump starter to start a car.

4.2. Napuhavanje guma

Connect Air Nozzle: Screw the extension hose onto the device and attach the appropriate nozzle to the tire valve.
Choose Unit & Preset Value: Turn on the device. Use the 'M' button to select the desired pressure unit (PSI, kPa, BAR) and the '+' / '-' buttons to set the target pressure.
Pritisnite za početak: Press the power button to begin inflation.
Automatsko isključivanje: Pumpa za naduvavanje će se automatski zaustaviti kada se dostigne podešeni pritisak.

Four-step guide on how to easily inflate a tire using the AstroAI M12-F Jump Starter's air compressor function. — Figure 9: Detailed steps for using the tire inflator feature.

4.3. Korištenje kao power bank

Connect your electronic device to the USB-A or USB-C output port on the AstroAI M12-F using a compatible charging cable. The device will automatically begin charging your connected device.

4.4. Korištenje LED svjetiljke

Press and hold the flashlight button to turn the LED light on. Briefly press the button again to cycle through the three modes: steady illumination, strobe, and SOS. Press and hold the button to turn the flashlight off.

5. Održavanje

Redovno punjenje: Da biste produžili vijek trajanja baterije, potpuno napunite uređaj svaka 3-6 mjeseci, čak i ako ga ne koristite.
Skladištenje: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Use the provided EVA storage box to keep all accessories organized and protected.
čišćenje: Obrišite uređaj mekom, suhom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
Kontrola temperature: Avoid operating the device in temperatures outside its specified range (-4°F to 122°F).

6. Otkrivanje problema

The AstroAI M12-F is designed with multiple safety features to prevent common issues. If you encounter problems, refer to the following:

Uređaj se ne uključuje: Provjerite da li je uređaj dovoljno napunjen.
Jump Start Failure: Provjerite da li je pametni ključampsu sigurno spojeni na ispravne terminale baterije (crvena na pozitivan, crna na negativan). Provjerite je li pametniamp indicator light is solid green. If the vehicle battery is completely dead, you may need to wait a few minutes after connecting before attempting to start.
Inflation Issues: Verify the air hose and nozzle are securely attached to both the device and the tire valve. Check that the desired pressure is set correctly.
Safety Protections Activated: The device's smart chip will activate protections (e.g., reverse polarity, overcurrent, high/low temperature) if an unsafe condition is detected. Refer to the indicator lights on the smart clamp for specific warnings. Disconnect and re-evaluate the situation before attempting further operation.

7. Specifikacije

Feature	Specifikacija
Brand	AstroAI
Model	M12-F
Peak AmpDob	5000 Amps
Pritisak u pumpi za napuhavanje guma	150 PSI
Kompatibilnost motora	All Gas & 10.0 L Diesel 12V Batteries
USB-A izlaz	18W PD (5V, 9V, 12V)
Vrsta baterije	Lithium Polymer
Radna temperatura	-4°F do 122°F (-20°C do 50°C)
Težina artikla	1.38 kg
Proizvođač	AstroAI

8. Jamstvo i podrška

For warranty information, product support, or any inquiries, please refer to the contact details provided in your product packaging or visit the official AstroAI website. Sačuvajte račun o kupovini za reklamacije.

	AstroAI DK-MF139 Uputstvo za upotrebu za startni uređaj i kompresor vazduha Korisnički priručnik za AstroAI DK-MF139 multifunkcionalni startni uređaj i kompresor zraka, u kojem su detaljno opisane njegove karakteristike, rad, sigurnost, rješavanje problema i specifikacije za upotrebu u automobilu.
	AstroAI M12 Jump Starter sa kompresorom za vazduh Uputstvo za upotrebu Sveobuhvatno korisničko uputstvo za AstroAI M12 Jump Starter sa kompresorom za vazduh. Naučite kako da pokrenete vozila pomoću kablova, koristite kompresor za vazduh, punite uređaje i razumete sigurnosne funkcije. Uključuje specifikacije, rešavanje problema i informacije o garanciji.
	AstroAI S8 Air Nano pumpa za gume sa Jump Starter-om - uputstvo za upotrebu Sveobuhvatni korisnički priručnik za AstroAI S8 Air Nano, prenosivi pumpa za napuhavanje guma s funkcijom pokretanja, uključujući upute, specifikacije, rješavanje problema i održavanje.
	AstroAI 150PSI prijenosni zračni kompresor korisnički priručnik Sveobuhvatno korisničko uputstvo za prenosivi kompresor zraka AstroAI 150PSI. Saznajte više o njegovim karakteristikama, radu, sigurnosnim mjerama opreza, rješavanju problema, specifikacijama i garanciji. Idealan je za napuhavanje guma automobila, motocikala i bicikala.
	AstroAI ATJ-8366 Multifunkcionalni zračni kompresor korisnički priručnik Sveobuhvatno korisničko uputstvo za AstroAI ATJ-8366 multifunkcionalni kompresor zraka, detaljni opis karakteristika, upute za način rada za gume i način rada velikog volumena, rješavanje problema, specifikacije i informacije o garanciji. Podržava AC/DC napajanje i napuhava razne predmete poput automobilskih guma, motocikala i bicikala.
	AstroAI M10 Jump Starter sa kompresorom za vazduh Uputstvo za upotrebu Sveobuhvatno korisničko uputstvo za AstroAI M10 Jump Starter sa kompresorom za vazduh, koje obuhvata podešavanje, rad, održavanje, rešavanje problema i specifikacije.

AstroAI M12-F