1. Proizvod je gotovview
The Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module is a high-performance control unit designed for industrial automation and IoT applications. It integrates an ESP32-S3 microcontroller, offering robust wireless communication capabilities (Wi-Fi and Bluetooth LE), multiple isolation protection circuits, and versatile connectivity options including isolated RS485 and an Ethernet port with optional Power over Ethernet (PoE).
This module features 8 high-quality relays and 8 digital inputs, making it suitable for controlling various devices and monitoring industrial signals. Its design emphasizes reliability and safety in demanding environments.
2. Ključne karakteristike
- ESP32-S3 Microcontroller: Equipped with an Xtensa 32-bit LX7 dual-core processor, operating at up to 240 MHz for efficient processing.
- Bežična povezanost: Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode communication for flexible network integration.
- 8-Channel Relays: High-quality relays with a contact rating of ≤10A 250V AC / 30V DC, suitable for various loads.
- 8-Channel Digital Inputs: Supports both passive (dry contact) and active (wet contact) digital inputs with bi-directional optocoupler isolation.
- Isolated RS485 Interface: For reliable connection to Modbus industrial modules or sensors, featuring hardware automatic control and protection circuits (TVS diode, surge protection, ESD protection).
- Ethernet priključak: Onboard W5500 Ethernet chip for 10/100Mbps network communication.
- Napajanje preko Etherneta (PoE): Optional version supports IEEE 802.3af standard for combined power and data over a single Ethernet cable.
- Fleksibilni ulaz snage: Supports USB Type-C (5V) for power, debugging, and firmware, and a wide 7-36V DC screw terminal input for industrial applications.
- RTC Chip: Onboard Real-Time Clock for scheduled tasks and time-sensitive operations.
- Multiple Isolation Protection: Includes optocoupler isolation, power isolation, and digital isolation to prevent interference and ensure stable operation.
- Indikatori statusa: Built-in RGB LED, PWR, TXD, and RXD indicators for monitoring device status.
- Kućište: Rail-mounted ABS protective case for easy installation and enhanced safety.
3. Sadržaj paketa
Prilikom otvaranja paketa provjerite da li su svi artikli prisutni i u dobrom stanju.
- ESP32-S3-POE-ETH-8DI-8RO Module x 1
- 2.4G 4dBi SMA Antenna x 1
- Odvijač x 1
4. Postavljanje i instalacija
4.1 Povezivanje napajanja
The module supports multiple power input methods:
- USB Type-C: Connect a 5V USB power source to the USB Type-C port for power, debugging, and firmware uploading.
- Screw Terminal: Connect a 7-36V DC power supply to the designated screw terminals. Ensure correct polarity.
- Napajanje preko Etherneta (PoE): For the PoE version, connect an 802.3af compliant PoE switch or router to the Ethernet port. This provides both power and network connectivity through a single cable.
4.2 Mrežna povezivost
- Wi-Fi: Attach the provided 2.4G SMA antenna to the external antenna connector. Configure Wi-Fi settings via firmware.
- Bluetooth LE: The module supports Bluetooth LE for short-range wireless communication.
- Ethernet: Connect a standard Ethernet cable to the RJ45 port for wired network access.
4.3 Relejne veze
The module provides 8 relay channels. Each relay has Normally Open (NO) and Common (COM) contacts. Refer to the diagram for wiring examples.
4.4 Digital Input Connections
The 8 digital inputs support both passive (dry contact) and active (wet contact) signals. Ensure proper wiring based on the sensor type.
4.5 RS485 interfejs
Connect RS485 devices (e.g., Modbus modules, sensors) to the isolated RS485 screw terminals. The interface features hardware automatic control for data direction and includes protection circuits.
4.6 Enclosure and Mounting
The module is housed in a rail-mounted ABS protective case, designed for easy installation in industrial control cabinets using a 35mm DIN rail.
5. Uputstvo za upotrebu
5.1 Početno uključivanje i konfiguracija
After connecting the power supply, the PWR LED should illuminate. The module can be configured via its Wi-Fi interface (AP mode), Ethernet, or through a serial connection via the USB Type-C port. Refer to the Waveshare Wiki for detailed programming and configuration guides.
5.2 Kontrola releja
The 8 relays can be controlled programmatically via the ESP32-S3 microcontroller. This allows for switching AC or DC loads based on logic defined in the firmware.
5.3 Digital Input Monitoring
Monitor the status of the 8 digital inputs to detect external events from sensors, switches, or other industrial signals. The bi-directional optocoupler isolation ensures signal integrity and protection.
5.4 RS485 komunikacija
Utilize the isolated RS485 interface for communication with other industrial devices, typically using the Modbus protocol. This enables data exchange and control within an industrial network.
5.5 Firmware Upload and Debugging
Connect the module to a computer via the USB Type-C port. Use the appropriate development environment (e.g., Arduino IDE, ESP-IDF) to upload custom firmware and debug applications.
6. Raspored i komponente ploče
Understanding the board layout is crucial for proper connection and operation. The following diagrams highlight key components and their functions.
6.1 Vrh View
- ESP32-S3-WROOM-1U-N16R8 (ESP32-S3 module)
- 8-channel quality relays
- Optocoupler isolation for relays
- dugme RESET
- PoE header (for PoE module)
- Dugme za pokretanje
- Power IC
- Digital isolation
- Power supply isolation
- Bi-directional optocoupler isolation
- RTC držač baterije
- Zujalica
- Digital input screw terminals
- Pin header (for other devices)
- LED indicators (PWR, RXD, TXD)
- USB Type-C konektor
- WS2812 RGB LED dioda
- Ethernet port
- Konektor eksterne antene
- Power supply screw terminal
- RS485 komunikacijsko sučelje
- RS485 matching resistor jumper
- Relay screw terminals
6.2 Dno View
- Onboard TVS (Tranzient Voltage Suppressor)
- RS485 conversion chip
- MP1605GTF-Z (DC-DC power module)
- PCF85063ATL (RTC chip)
- TCA9554PWR (GPIO expansion chip)
- W5500 (Ethernet chip)
- Utor za TF karticu
7. Specifikacije
| Kategorija | Parametar | Vrijednost |
|---|---|---|
| Mikrokontroler | Modul | ESP32-S3-WROOM-1U-N16R8 (ESP32-S3) |
| Procesor | Xtensa 32-bit LX7 dual-core, up to 240 MHz | |
| Bežična komunikacija | Wi-Fi | 2.4 GHz (802.11 b/g/n) |
| Bluetooth | Bluetooth 5, BLE | |
| USB | Konektor | USB Type-C |
| Napajanje | 5V | |
| Isolated Communication Interface | Interface | RS485 |
| Zaštita | TVS dioda, zaštita od prenapona i ESD zaštita | |
| Ethernet interfejs | Luka | PoE Ethernet port (IEEE 802.3af standard for PoE version) |
| Digitalni ulaz | Ulazni kanali | 8 |
| Ulazni voltage | 5V-36V | |
| Tip unosa | Passive input / active input (NPN or PNP type) | |
| Vrsta izolacije | Bi-directional optocoupler isolation | |
| Relej | Relejni kanali | 8 |
| Contact Rating | ≤10A 250V AC / 30V DC | |
| Kontakt obrazac | 1NO 1NC | |
| Izolacija | Izolacija optokaplera | |
| LED indikatori | RGB | Programmable color LED |
| Pwr | Crveni indikator napajanja | |
| TXD | Green TX indicator | |
| RXD | Blue RX indicator | |
| Power Supply Screw Terminal | Voltage domet | 7-36V |
| Izgled | Enclosure | Rail-mount ABS protective case |
| Dimenzije | 175 × 90 × 40 (mm) |
8. Održavanje
The Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module is designed for robust industrial use. To ensure its longevity and reliable operation:
- Uslovi okoline: Operate the module within specified temperature and humidity ranges. Avoid exposure to excessive dust, moisture, or corrosive substances.
- čišćenje: Ako je potrebno, nježno očistite vanjski dio modula mekom, suhom krpom. Ne koristite tekuća sredstva za čišćenje ili otapala.
- Ažuriranja firmvera: Regularly check the Waveshare Wiki for firmware updates to ensure optimal performance and access to new features.
- Veze: Periodically inspect all screw terminal connections to ensure they are secure and free from corrosion.
9. Otkrivanje problema
If you encounter issues with your Waveshare Industrial 8-Channel ESP32-S3 WiFi Relay Module, consider the following troubleshooting steps:
- Nema napajanja:
- Check if the power supply (USB-C or 7-36V terminal) is correctly connected and providing the specified voltage.
- Ensure the PWR LED is illuminated. If not, verify the power source.
- For PoE versions, confirm the Ethernet cable is connected to an active PoE switch/injector.
- No Network Connectivity (Wi-Fi/Ethernet):
- Wi-Fi: Ensure the antenna is securely attached. Verify Wi-Fi credentials and network availability. Try resetting the module.
- Ethernet: Check the Ethernet cable connection. Confirm the network switch/router is operational.
- Relays Not Actuating:
- Verify the control logic in your firmware.
- Check the power supply to the module and the load connected to the relay.
- Ensure the load current and voltage do not exceed the relay's contact rating.
- Digitalni ulazi ne reagiraju:
- Confirm correct wiring for passive (dry contact) or active (wet contact) sensors.
- Check the sensor's functionality independently.
- Potvrdite unos voltage range for active inputs (5V-36V).
- RS485 Communication Issues:
- Check wiring polarity (A/B).
- Ensure the RS485 matching resistor jumper is correctly set if needed.
- Verify baud rate and communication parameters in your software.
For further assistance, consult the official Waveshare Wiki resources or contact Waveshare technical support.
10. Podrška i resursi
Waveshare provides comprehensive resources to assist users with their products:
- Zvanična Wiki stranica: The Waveshare Wiki is the primary source for detailed documentation, programming guides, sample code, and technical specifications. Visit the Waveshare store page and look for the Wiki link.
- tehnička podrška: For specific technical inquiries or issues not covered in the documentation, please contact Waveshare customer support through their official channels.
10.1 Informacije o garanciji
Warranty terms and conditions for this product are provided by Waveshare. Please refer to the product packaging or the official Waveshare webza detaljne informacije o garanciji.
