TOMZN TOB9-63M Metering 50A

TOMZN TOB9-63M Metering 50A 1P+N WiFi Smart Circuit Breaker Energy Meter User Manual

Model: TOB9-63M Metering 50A

1. Uvod

This manual provides essential information for the safe and effective installation, operation, and maintenance of your TOMZN TOB9-63M Metering 50A 1P+N WiFi Smart Circuit Breaker. Please read this manual thoroughly before installation and retain it for future reference. This device integrates circuit protection with smart energy monitoring and control capabilities via WiFi.

2. Važne informacije o sigurnosti

WARNING: Electrical shock hazard. Installation and servicing must be performed by qualified personnel only.

3. Značajke proizvoda

4. Sadržaj paketa

5. Tehničke specifikacije

SpecifikacijaVrijednost
Broj modelaTOB9-63M Metering 50A
Nazivna struja50A
Poljaci1P+N
Operating Voltage90-300V AC (50/60Hz)
Funkcija mjerenjaYes (kWh, W, V, A)
Pametni uređajYes (WiFi, TUYA/Smartlife Compatible)
CertifikacijaCE
Težina artikla3.53 unce
Dimenzije paketa0.39 x 0.39 x 0.39 inča (približno)

6. Proizvod je gotovview i komponente

The TOB9-63M is a compact device designed for DIN rail mounting. It features clear markings for power input (N, L) and load output (N, L), a manual ON/OFF button, and indicator lights for signal and WiFi status.

Front view of three TOMZN smart circuit breaker variants, showing power input, kWh display, WiFi indicator, CE mark, signal light, manual button, and load output terminals.
Slika 1: Prednja strana view of TOMZN TOB9 series smart circuit breakers. The TOB9-63M (rightmost) features energy metering (kWh, W, V, A) and WiFi connectivity.
Side view of the TOMZN TOB9-63M Metering smart circuit breaker, showing the input and output terminals and DIN rail mounting clips.
Slika 2: Bočna strana view of the TOB9-63M, illustrating the screw terminals for power input (N, L) and load output (N, L), and the DIN rail mounting mechanism.

7. Instalacija i ožičenje

7.1 Koraci instalacije

  1. Isključivanje struje: Before starting, ensure the main power supply to the circuit is completely turned off at the service panel.
  2. Montaža: Mount the TOB9-63M onto a standard 35mm DIN rail within an appropriate electrical enclosure. Ensure it is securely clipped into place.
  3. Ožičenje: Refer to the wiring diagram below. Connect the incoming neutral (N) and live (L) wires to the top terminals marked 'N Power' and 'L Power' respectively. Connect the outgoing neutral (N) and live (L) wires to the bottom terminals marked 'N Load' and 'L Load'.
  4. Sigurne veze: Tighten all screw terminals firmly to prevent loose connections, which can cause overheating or intermittent operation.
  5. Potvrdite: Dvaput provjerite sve ožičenja radi ispravnosti i sigurnosti.
  6. Vrati snagu: Nakon što je instalacija završena i provjerena, vratite napajanje u strujno kolo.

7.2 Dijagram ožičenja

The device is a 1P+N (Single Pole + Neutral) circuit breaker. The 'N' terminal is for the Neutral wire, and the 'L' terminal is for the Live (Phase) wire. Ensure correct polarity.

8. Smart Functionality Setup (WiFi & App)

  1. Preuzmi aplikaciju: Preuzmite aplikaciju 'Tuya Smart' ili 'Smart Life' iz trgovine aplikacija za vaš pametni telefon (iOS ili Android).
  2. Registracija/Prijava: Otvorite aplikaciju i registrujte se za novi račun ili se prijavite ako ga već imate.
  3. Omogući način uparivanja: With the device powered on, press and hold the manual ON/OFF button for 5-7 seconds until the WiFi indicator light starts blinking rapidly. This indicates pairing mode.
  4. Dodaj uređaj: In the app, tap the '+' icon (usually in the top right corner) to add a new device. Select 'Electrical' > 'Circuit Breaker (Wi-Fi)' or 'Switch (Wi-Fi)'.
  5. Povežite se na WiFi: Follow the on-screen instructions to connect the device to your 2.4GHz WiFi network. Enter your WiFi password when prompted.
  6. Uređaj je dodan: Once successfully connected, the WiFi indicator light on the device will stop blinking and remain solid. You can then rename the device in the app.

9. Uputstvo za upotrebu

9.1 Ručni rad

9.2 Kontrola aplikacija

10. Održavanje

11. Otkrivanje problema

ProblemMogući uzrokRješenje
Uređaj se ne uključuje.No power to the circuit breaker; incorrect wiring.Check the main circuit breaker. Verify wiring connections are correct and secure.
WiFi indicator not blinking (pairing mode).Button not held long enough; device already paired.Press and hold the ON/OFF button for 5-7 seconds. If already paired, check app connection.
Ne mogu se povezati na WiFi.Netačna WiFi lozinka; mreža od 5 GHz; slab signal.Ensure you are using a 2.4GHz WiFi network. Re-enter password carefully. Move device closer to router or use a WiFi extender.
Uređaj se često isključuje.Overload or short circuit in the connected load.Identify and resolve the cause of the overload or short circuit. Consult a qualified electrician.
Energy metering data is inaccurate.Nepravilno ožičenje; kvar uređaja.Verify wiring connections. If problem persists, contact customer support.

12. Garancija i podrška

12.1 Informacije o garanciji

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the specific warranty terms provided at the point of purchase or contact your retailer for details. The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or acts of nature.

12.2 Korisnička podrška

For technical assistance, troubleshooting, or warranty claims, please contact your retailer or the manufacturer's customer support. Have your product model number and purchase information ready when contacting support.

Povezani dokumenti - TOB9-63M Metering 50A

Preview TOMZN DDS238-VAP Multifunctional Voltage i Current Protector Uputstvo za upotrebu
User manual for the TOMZN DDS238-VAP multifunctional protective device, detailing its features, specifications, operation, and installation for overvoltage, undervoltage, and overcurrent protection, along with energy metering capabilities.
Preview Uputstvo za upotrebu pametnog automatskog prekidača za Wi-Fi seriju TOMZN TOQ7e
Sveobuhvatno uputstvo za upotrebu za TOMZN TOQ7e seriju Wi-Fi pametnog automatskog prekidača, koje detaljno opisuje instalaciju, rad, tehničke specifikacije i funkcije daljinskog upravljanja za pouzdano upravljanje napajanjem.
Preview Tomzn Isolation Type Automatic Transfer Switch Operating Instructions
Operating manual for the Tomzn Isolation Type Automatic Transfer Switch, detailing installation, operation, technical specifications, and wiring for reliable dual power source management.
Preview Tuya QCB2/QCB2L Uputstvo za upotrebu pametnog mjernog prekidača
This manual provides detailed information on the Tuya QCB2/QCB2L Smart Metering Circuit Breaker, including its features, specifications, installation guide, function settings, and safety precautions. Learn how to connect, configure, and operate your smart circuit breaker for enhanced energy control and home security.
Preview Tongou TOQCB2 Smart Metering Circuit Breaker User Manual & Specifications
Comprehensive user manual and technical specifications for the Tongou TOQCB2 Smart Metering Circuit Breaker, covering installation, functions, features, and safety guidelines.
Preview SMTONOFF WiFi Smart Metering Breaker Auto-reclosing Protector User Manual
Comprehensive user manual for the SMTONOFF WiFi Smart Metering Breaker, an auto-reclosing protector and energy meter for AC circuits. Features include remote control via Tuya Smart/Smart Life app, voice control, adjustable protections (over/under voltage, overcurrent, leakage), prepaid metering, and local manual operation. Includes specifications, functional features, setup guide, and wiring diagram.