Dasqua Digital Angel Finder Procractor

Dasqua 220° digitalni uglomjer - uputstvo za upotrebu

Model: Digital Angel Finder Procractor

1. Uvod

This manual provides detailed instructions for the safe and effective use of your Dasqua 220° Digital Angle Finder Protractor. Please read this manual thoroughly before operating the device and retain it for future reference. This tool is designed for precise angle measurement in various applications, including woodworking, metalworking, and construction.

2. Proizvod je gotovview

The Dasqua Digital Angle Finder Protractor is a versatile measuring instrument featuring a 425mm sliding leg, dual bubble levels, and a backlit LCD for clear readings. It is built for durability and accuracy in demanding environments.

2.1 Ključne karakteristike

  • Precise Angle Measurement: Measures angles up to 220° with an accuracy of ±0.2°.
  • MTR/COM Modes: Dedicated modes for calculating double miter angles and compound errors.
  • 425mm Sliding Leg: Facilitates measurements in tight spaces and offers smooth adjustments.
  • Mehanizam zaključavanja: Ensures angles are securely held for transfer.
  • Dual Bubble Levels: For horizontal and vertical leveling, providing 1.5mm/m accuracy.
  • LCD sa pozadinskim osvetljenjem: 0.1° resolution display for clear visibility in various lighting conditions.
  • Izdržljiva konstrukcija: IP54 waterproof housing, resistant to dust, water, and oil.

2.2 Komponente

Diagram showing the components of the Dasqua Digital Angle Finder Protractor, including aluminum material, horizontal bubble, extension plate, vertical bubble, backlit LCD display, and lock knob.
Figure 1: Product Components. This diagram illustrates the main parts of the angle finder, including the aluminum body, horizontal and vertical bubble levels, the extendable leg, the backlit LCD screen, and the locking knob.
  • Glavno tijelo: Houses the digital display and primary measuring arm.
  • Sliding Leg (Extension Plate): Extends from the main body for measuring larger angles or reaching into confined spaces.
  • Ručka za zaključavanje: Secures the sliding leg at a desired angle.
  • LCD ekran: Shows digital angle readings and mode indicators.
  • Kontrolna dugmad: (On-Off, Hold, 180°, MTR, COM) for various functions.
  • Nivoi mjehurića: One horizontal and one vertical for traditional leveling.

3. Podešavanje

3.1 Instalacija baterije

The device requires 2 x 1.5V LR6 (AA) batteries for the digital display. To install:

  1. Locate the battery compartment cover, typically on the side or back of the main body.
  2. Otvorite poklopac.
  3. Umetnite dvije AA baterije, pazeći na ispravan polaritet (+/-).
  4. Čvrsto zatvorite poklopac odeljka za baterije.

The bubble levels operate mechanically and do not require batteries.

3.2 Početno uključivanje

Pritisnite On-Off button to power on the device. The backlit LCD will illuminate, displaying "0.0" or the current angle.

4. Uputstvo za upotrebu

Close-up of the Dasqua Digital Angle Finder's control panel, showing buttons for MTR, COM, Hold, 180 degrees, and On-Off/Zero Setting, along with the backlit LCD display.
Figure 2: Control Buttons. This image highlights the functions of each button on the device: MTR (Simple Miter Mode), COM (Compound Bevel Cutting Mode), Hold (Data Hold), 180° (Supplementary Angle Display), and the On-Off/Zero Setting Key.

4.1 Osnovno mjerenje uglova

  1. Uključite uređaj.
  2. Place the main body and the sliding leg against the surfaces whose angle you wish to measure.
  3. Adjust the sliding leg until it aligns perfectly with the second surface.
  4. Read the angle directly from the backlit LCD display.
  5. Use the lock knob to secure the angle for transfer if needed.

4.2 MTR (Simple Miter) Mode

Pritisnite MTR button to enter Simple Miter Mode. This mode is useful for calculating the miter angle required for a joint. The display will show the miter angle (half of the measured angle) needed for a perfect joint.

4.3 COM (Compound Bevel Cutting) Mode

Pritisnite COM button to enter Compound Bevel Cutting Mode. This mode assists in calculating compound angles for complex cuts, such as crown molding or roof rafters. Refer to specific project requirements for interpreting the displayed values in this mode.

4.4 Funkcija čekanja

Pritisnite Čekaj button to freeze the current angle reading on the LCD. This is useful when measuring in awkward positions where reading the display directly is difficult. Press Čekaj ponovo da biste oslobodili očitavanje.

4.5 180° Supplementary Angle Display

Pritisnite 180° button to display the supplementary angle (180° minus the measured angle). This is useful for certain applications where the inverse angle is required.

4.6 Podešavanje nule

To set the current position as the zero reference, fully close the angle finder and press the On-Off button briefly. The display will reset to "0.0". This allows for relative angle measurements.

4.7 Using the Bubble Levels

A person using the Dasqua Digital Angle Finder Protractor to check a horizontal surface, showing the horizontal bubble level and the digital display.
Figure 3: Horizontal Leveling. The image demonstrates using the horizontal bubble level to ensure a surface is perfectly flat. Note that the digital display does not show a numerical value for the bubble level.
A person using the Dasqua Digital Angle Finder Protractor to check a vertical surface, showing the vertical bubble level and the digital display.
Figure 4: Vertical Leveling. This image shows the tool being used to verify a vertical alignment using its integrated vertical bubble level. The digital display provides angle readings, but not for the bubble level itself.

The angle finder includes two traditional bubble levels for quick horizontal and vertical leveling. These levels operate independently of the digital display and do not require batteries. Align the tool with the surface and observe the bubble to determine level or plumb.

5. Održavanje

  • čišćenje: Wipe the device with a soft, dry cloth after each use. For stubborn dirt, a slightly damp cloth can be used. Avoid abrasive cleaners or solvents.
  • Skladištenje: Store the angle finder in its included storage bag in a dry, clean environment when not in use.
  • Zamjena baterije: Replace batteries when the display becomes dim or unresponsive. Remove batteries if the device will not be used for an extended period to prevent leakage.
  • IP54 ocjena: The device is IP54 rated, meaning it is protected from dust ingress and splashing water from any direction. While durable, avoid submerging the device in water.

6. Otkrivanje problema

ProblemMogući uzrokRješenje
Ekran je prazan ili taman.Slabe ili prazne baterije; nepravilna ugradnja baterija.Zamijenite baterije novim AA baterijama, pazeći na ispravan polaritet.
Inaccurate angle readings.Device not properly zeroed; obstruction; damaged sensor.Perform zero-setting procedure. Ensure surfaces are clean and flat. If problem persists, contact support.
Sliding leg does not lock securely.Lock knob not tightened sufficiently; debris in mechanism.Ensure lock knob is fully tightened. Clean any debris from the sliding mechanism.

7. Specifikacije

Diagram illustrating the measuring range and dimensions of the Dasqua Digital Angle Finder Protractor, showing a 0-220 degree range, +/- 0.2 degree accuracy, and dimensions of 425mm x 58mm x 41mm.
Figure 5: Measuring Range and Dimensions. This graphic details the operational range of the angle finder (0-220 degrees), its accuracy (±0.2 degrees), and its physical dimensions (425mm length, 58mm width, 41mm height).
  • Mjerni opseg: 0-220°
  • tačnost: ±0.2°
  • rezolucija: 0.1°
  • Sliding Leg Length: 425mm
  • Bubble Level Accuracy: 1.5 mm/m
  • Izvor napajanja: 2 x 1.5V LR6 (AA) batteries (for digital display)
  • Materijal: Aluminijum
  • Ocjena zaštite: IP54 (Otporan na prašinu i prskanje vode)
  • Težina artikla: 1.28 funte
  • Dimenzije paketa: 17.87 x 9.17 x 1.77 inča

8. Garancija i podrška

Dasqua products are manufactured to high-quality standards. For warranty information or technical support, please refer to the official Dasqua webweb-mjesto ili kontaktirajte njihovu službu za korisnike. Sačuvajte račun kao dokaz o kupovini.

Za dodatnu pomoć, možete posjetiti Dasqua Store on Amazon.

Povezani dokumenti - Digital Angel Finder Procractor

Preview Upute za korištenje digitalnog kutnog ravnala Dasqua
Sveobuhvatna uputstva za Dasqua digitalni ugaoni ravnalo, koja obuhvataju funkcije, karakteristike, održavanje, rješavanje problema i načine rada kao što su NORMAL, CROWN i CUS.
Preview Dasqua Digital 4-Piece Combination Square Set: Product Instructions and Specifications
Comprehensive product instructions for the Dasqua Digital 4-Piece Combination Square Set, covering structure, usage, specifications, and operational guidance for features like angle measurement, leveling, and unit conversion.
Preview Dasqua uputstvo za upotrebu pomične skale/mjernog uređaja
Uputstvo za upotrebu za Dasqua pomična mjerila sa vernierom i brojčanikom, strukture pokrivanja, očitavanje mjerenja, uobičajena upotreba, posebna upotreba pomičnih mjerila, mjere opreza i rješavanje problema.
Preview Upute za upotrebu i upute za korištenje digitalnog pomčnog mjerila Dasqua IP67
Sveobuhvatna uputstva za Dasqua IP67 digitalno pomično mjerilo. Ova uputstva obuhvataju smjernice za performanse, sigurnosne mjere predostrožnosti, detaljne specifikacije, uputstva za upotrebu, zamjenu baterija, rješavanje problema i pravilne metode odlaganja za precizan i siguran rad.
Preview Dasqua IP65 Vodootporni digitalni vanjski mikrometar: Upute za proizvod
Sveobuhvatne upute za Dasqua IP65 vodootporni digitalni vanjski mikrometar, koje pokrivaju upotrebu, strukturu, tipke, bateriju, rješavanje problema i mjere opreza.
Preview Dasqua digitalni vanjski mikrometar: Upute za proizvod i specifikacije
Detaljna uputstva za proizvod i specifikacije za Dasqua digitalni mikrometar za vanjske mjere, koja obuhvataju njegovu strukturu, tipke, LCD ekran, rad, zahtjeve za napajanje, sigurnosne mjere i vodič za rješavanje problema.