GAMEMAX Starlight 2 AB Mid Tower ATX PC kućište - uputstvo za upotrebu

1. Uvod

Thank you for choosing the GAMEMAX Starlight 2 AB Mid Tower ATX PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system components.

2. Sigurnosne informacije

• Uvijek isključite napajanje iz zidne utičnice prije instaliranja ili uklanjanja bilo kakvih komponenti.
• Pažljivo rukujte svim komponentama kako biste spriječili oštećenja.
• Nosite antistatičku narukvicu kako biste spriječili oštećenje osjetljivih komponenti uzrokovano elektrostatičkim pražnjenjem (ESD).
• Keep the case away from direct sunlight, high temperatures, and moisture.
• Osigurajte odgovarajuću ventilaciju oko kućišta kako biste spriječili pregrijavanje.
• Ne pokušavajte modificirati kućište ili njegove komponente, jer to može poništiti vašu garanciju i predstavljati sigurnosni rizik.

3. Sadržaj paketa

Molimo Vas da provjerite da li se u Vašem paketu nalaze svi artikli:

• GAMEMAX Starlight 2 AB Mid Tower ATX PC Case
• Kutija s priborom (sadrži vijke, odstojnike, vezice za kablove itd.)
• Korisnički priručnik (ovaj dokument)

4. Proizvod je gotovview

The GAMEMAX Starlight 2 AB is a Mid Tower ATX PC case designed for efficient cooling and versatile configurations. It features a tempered glass side panel, pre-installed ARGB fans, and comprehensive hardware compatibility.

Slika 4.1: Prednje-lijevo view of the GAMEMAX Starlight 2 AB PC Case, showcasing the tempered glass side panel and the vibrant ARGB lighting of the pre-installed fans.

Slika 4.2: Direktno ispred view highlighting the three 120mm ARGB fans, visible through the clear front panel, designed for optimal airflow.

Slika 4.3: Top-front perspective showing the top-mounted I/O panel, including USB ports and audio jacks, along with the mesh top panel for additional cooling.

Slika 4.4: Pozadi view of the PC case, illustrating the rear exhaust fan, expansion slots, and the power supply mounting area at the bottom.

Slika 4.5: Enterijer view of the main chamber, showing the motherboard tray, fan mounts, and ampprostor za ugradnju komponenti.

Slika 4.6: View behind the motherboard tray, revealing cable routing cutouts and mounting points for storage drives, facilitating clean cable management.

5. Specifikacije

6. Postavljanje i instalacija

6.1 Priprema slučaja

1. Postavite kućište na ravnu, stabilnu površinu.
2. Carefully remove the tempered glass side panel by unscrewing the thumb screws and sliding it open. Set it aside in a safe place.
3. Remove the solid right side panel to access the cable management area.

6.2 Instalacija matične ploče

1. Instalirajte I/O štitnik u zadnji otvor kućišta.
2. Align your motherboard with the standoffs inside the case. Ensure the standoffs match your motherboard's form factor (ATX, Micro ATX, Mini ITX).
3. Pričvrstite matičnu ploču priloženim vijcima.

6.3 Instalacija jedinice za napajanje (PSU).

1. Mount the PSU into the dedicated compartment at the bottom rear of the case.
2. Pričvrstite napajanje vijcima sa stražnje strane kućišta.

6.4 Storage Device Installation (HDD/SSD)

• Locate the drive bays or mounting points for 3.5" HDDs and 2.5" SSDs.
• Install your storage devices using the appropriate screws.

6.5 Graphics Card (GPU) and Expansion Card Installation

1. Uklonite potrebne poklopce za utore za proširenje sa stražnje strane kućišta.
2. Insert your graphics card or other expansion cards into the PCIe slots on your motherboard.
3. Pričvrstite kartice vijcima.

6.6 Connecting Front I/O Cables

Connect the following cables from the case's front I/O panel to the corresponding headers on your motherboard:

• USB 3.0 zaglavlje
• USB 2.0 zaglavlje
• Type-C Header (if applicable)
• HD audio zaglavlje
• Power Switch, Reset Switch, Power LED, HDD LED headers

6.7 Upravljanje kablovima

Iskoristite izreze za usmjeravanje kablova i tačke za vezivanje iza ležišta matične ploče kako biste organizovali i osigurali kablove. Ovo poboljšava protok vazduha i estetiku.

7. Uputstvo za upotrebu

7.1 Uključivanje

After all components are installed and cables are connected, replace both side panels. Connect your power cable to the PSU and a wall outlet, then press the power button on the case's front I/O panel to start your system.

7.2 ARGB kontrola ventilatora

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) if your motherboard supports a 3-pin 5V ARGB header. Connect the ARGB cable from the case's fan hub to the motherboard's ARGB header. Refer to your motherboard manual for specific instructions on ARGB software usage.

8. Održavanje

8.1 Čišćenje filtera za prašinu

The case includes integrated removable dust filters. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your system. Gently slide out the filters, clean them with a soft brush or rinse with water (ensure they are completely dry before reinstallation), and then reinsert them.

8.2 General Case Cleaning

Koristite meku, damp cloth to wipe down the exterior surfaces of the case. For the tempered glass panel, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid using harsh chemicals or abrasive materials.

9. Otkrivanje problema

• Sistem se ne uključuje: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Verify the PSU switch is in the 'ON' position. Check front panel power switch connection to the motherboard.
• Fans are not spinning or ARGB not working: Check fan power connections to the motherboard or fan hub. Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard. Verify ARGB software settings.
• Nema izlaza za prikaz: Confirm the graphics card is properly seated in its PCIe slot and power cables are connected. Ensure the monitor cable is connected to the graphics card, not the motherboard's integrated graphics port (unless using integrated graphics).
• pregrijavanje: Ensure all fans are spinning correctly and are oriented for proper airflow (intake/exhaust). Clean dust filters regularly. Verify CPU cooler installation.

10. Garancija i podrška

For warranty information or technical support, please refer to the GAMEMAX official webweb-mjesto ili kontaktirajte lokalnog prodavača. Sačuvajte dokaz o kupovini za slučaj reklamacije.

11. Informacije o odlaganju

Please dispose of this product in accordance with local environmental regulations. Do not dispose of electronic waste with general household waste.