Važne informacije o sigurnosti
Please read and understand all instructions before installing or operating this water heater. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified plumber or electrician in accordance with all local codes and regulations.
- Ensure the power supply matches the specifications of the unit (120V, 1440W).
- Do not operate the water heater if it is not filled with water.
- Install a temperature and pressure relief (T&P) valve as specified in the installation instructions.
- Nemojte blokirati ili tamper with the T&P valve.
- Maintain proper clearances around the unit for ventilation and service.
- Isključite napajanje prije izvođenja bilo kakvog održavanja ili servisiranja.
Product Overview
The Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater is designed to provide instant hot water at the point of use, reducing wait times and conserving energy. Its compact design allows for versatile installation in various settings.
Ključne karakteristike
- Kapacitet od 2.5 galona: Stores heated water for immediate use.
- 1440W Heating Element: Provides rapid heating for on-demand hot water.
- Izdržljivi rezervoar od nehrđajućeg čelika: Resists corrosion for extended product life.
- Triple-Layer Insulation: Features enamel coating, high-density insulation foam, and a reinforced decarburized steel plate for superior heat preservation and reduced energy loss.
- Podesivi termostat: Allows precise temperature control up to 85°C (185°F).
- Poboljšana sigurnost: Includes high-temperature resistance, high-pressure resistance (up to 1.0 MPa), dry-burn protection, IPX4 waterproof rating, and advanced leakage prevention.
- Višenamjenska instalacija: Can be installed under-sink, on a wall, or floor-mounted.
Komponente jedinice
The water heater includes the main unit, a temperature and pressure relief (T&P) valve, mounting brackets, and screws.
Slika: Front view of the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater, showing the control knob and inlet/outlet connections.
Specifikacije
Detailed technical specifications for the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater.
| Specifikacija | Vrijednost |
|---|---|
| Brand | Ranein |
| Broj modela | RC25G-W |
| Kapacitet | 2.5 galona |
| Voltage | 120 Volts |
| Wattage | 1440 Watts |
| Maksimalna temperatura | 85°C (185°F) |
| Maksimalni radni pritisak | 100 PSI (1.0 MPa) |
| Waterproof Rating | IPX4 |
| Dimenzije proizvoda (Š x V x D) | 13.39" x 13.39" x 11.42" |
| Težina artikla | 17.63 funte |
| Vrsta montaže | Floor, Wall |
Image: Visual representation of the water heater's dimensions and key specifications, including capacity, voltage, power, max water pressure, weight, amperage, and waterproof grade.
Instalacija
Prije instalacije
- Verify that the installation location is suitable for the unit's size and weight when full.
- Ensure access to a standard 120V electrical outlet.
- Confirm that water supply lines are accessible and can be connected to the unit.
- Turn off the main water supply and electrical power to the installation area.
Opcije montaže
The Ranein WarmCube 2.5 can be installed in several configurations:
- Under-Sink: Ideal for kitchens and bathrooms where space is limited.
- na zidu: Use the provided mounting brackets and screws to secure the unit to a sturdy wall surface.
- Montirano na pod: Postavite jedinicu na stabilnu, ravnu površinu.
Image: Depicts the water heater installed under a sink and wall-mounted in a bathroom vanity, illustrating versatile placement options.
Vodovodne veze
- Install the provided Temperature and Pressure (T&P) relief valve into the designated port on the top of the water heater. Ensure a watertight seal using appropriate sealant (e.g., PTFE tape).
- Connect the cold water inlet (blue port) to your cold water supply line.
- Connect the hot water outlet (red port) to your hot water faucet or fixture.
- Open the hot water faucet at the fixture to allow air to escape from the tank as it fills with water.
- Once water flows steadily from the hot water faucet, close the faucet. Check all connections for leaks.
Video: Demonstrates the installation of the pressure relief valve onto the Ranein mini tank water heater, showing the proper threading and tightening process.
Električna veza
- Plug the water heater's power cord into a grounded 120V electrical outlet.
- Ensure the outlet is dedicated and properly rated for the appliance's wattage (1440W).
Operacija
Početno pokretanje
- After plumbing and electrical connections are complete and checked, turn on the electrical power to the unit.
- The heating indicator light will illuminate, indicating that the water heater is actively heating the water.
- Allow sufficient time for the water to reach the desired temperature.
Podešavanje temperature
- The water heater features a front-mounted rotary knob for temperature adjustment.
- Okrenite dugme u smjeru kazaljke na satu da biste povećali temperaturu, a u smjeru suprotnom od kazaljke na satu da biste je smanjili.
- The temperature range is typically between 55°F (13°C) and 145°F (63°C). Adjust to a comfortable and safe level.
- For energy efficiency, consider setting the temperature to the lowest comfortable setting.
Image: Illustrates the temperature adjustment knob on the water heater, with examples of suitable temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
Održavanje
Regular maintenance ensures optimal performance and extends the lifespan of your water heater.
Rutinsko održavanje
- Godišnja inspekcija: Have a qualified professional inspect the unit annually for any signs of wear, corrosion, or leaks.
- T&P Valve Test: Test the T&P relief valve at least once a year by lifting the lever. Ensure water flows freely and then reseats properly. If it does not, replace the valve.
- Eksterijerno čišćenje: Očistite spoljašnjost jedinice mekom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje.
Pražnjenje rezervoara
If the unit will be unused for an extended period or if there is a risk of freezing, drain the tank:
- Turn off the electrical power to the water heater.
- Turn off the cold water supply to the unit.
- Open a hot water faucet at a nearby fixture to relieve pressure.
- Carefully open the drain valve (if equipped) or disconnect the cold water inlet to allow the tank to drain.
- Once drained, leave the faucet open and the cold water inlet disconnected until ready to refill.
Rješavanje problema
Pogledajte donju tabelu za uobičajene probleme i njihova moguća rješenja.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema tople vode | No power; Thermostat set too low; Heating element failure | Check power supply/breaker; Adjust thermostat; Contact customer support |
| Voda nije dovoljno topla | Thermostat set too low; High hot water demand; Cold water mixing | Increase thermostat setting; Allow time for recovery; Check for cross-connection |
| Prevruća voda | Termostat je previsoko postavljen | Decrease thermostat setting |
| Leaking from T&P valve | Excessive pressure; Faulty valve | Check water pressure; Replace T&P valve |
| Jedinica pravi buku | Nakupljanje sedimenta u rezervoaru | Drain and flush the tank (refer to maintenance section) |
Garancija i podrška
Ranein products are manufactured to high-quality standards and are backed by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Ranein customer support through the retailer where the product was purchased or visit the official Ranein webstranica za kontakt informacije.
