SYNCO Xvision Video Transmission System User Manual

1. Proizvod je gotovview

The SYNCO Xvision Video Transmission System provides stable and high-quality wireless video transmission for professional filming, live streaming, and TVC production. This system includes one transmitter (TX) and one receiver (RX), designed for real-time monitoring with ultra-low latency.

Figure 1.1: SYNCO Xvision Video Transmission System (1 TX and 1 RX) and included USB-C cables.

Ključne karakteristike:

• Superior Signal Penetration: Stable 1080P/60fps video transmission over long distances (up to 300m) using SYNCO's ultra-penetration technology.
• Ultra-niska latencija: Achieves a 40ms latency for precise real-time feedback, crucial for dynamic shooting environments.
• Low Power Design: Utilizes advanced low-power chips and intelligent power management, consuming only 2W, ensuring quiet and efficient operation without fan cooling.
• All-in-One Assistive App (SYNCO Link): Supports real-time monitoring, image adjustments (zebra stripes, mirror, inverse colors), video saving, screenshot, and playback functions.
• Smart Design, Easy Operation: Features a 1.47-inch large display for real-time device status, intuitive button layout, and automatic pairing memory.
• Fleksibilne opcije napajanja: Supports NP-F battery (7.4-8.4V) and USB-C power input (5V 2A) for versatile use.
• Kompaktan i lagan: Weighs only 119g with foldable antennas, making it highly portable.

2. Šta se nalazi u kutiji

• 1 x predajnik (TX)
• 1 x prijemnik (RX)
• 1 x Type-C kabel

Figure 2.1: Included components: Transmitter, Receiver, and Type-C Cable.

3. Raspored uređaja i portovi

Familiarize yourself with the various components and connection points of the SYNCO Xvision units.

Slika 3.1: Bočna strana view of the unit highlighting the Power Switch, Pairing Button, and 5V IN USB-C Port.

Figure 3.2: HDMI ports on the Transmitter (HDMI IN, HDMI OUT/Loop Out) and Receiver (2x HDMI OUT).

• Prekidač: Used to turn the device On or Off.
• Gumb za uparivanje: Initiates the pairing process between units.
• USB-C Port (5V IN): Za napajanje.
• HDMI IN (Transmitter): Connects to the video source (e.g., camera).
• HDMI OUT (Transmitter - Loop Out): Allows for local monitoring of the input signal.
• HDMI OUT (Receiver): Connects to display monitors. The receiver has two HDMI OUT ports.
• Antene: Foldable antennas for signal transmission and reception.

4. Podešavanje i početni rad

4.1 Napajanje uređaja

The SYNCO Xvision system offers flexible power options:

• NP-F Battery: Insert a compatible NP-F battery (7.4-8.4V) into the battery slot. Press the lock button to slide the battery in or out.
• USB-C napajanje: Connect a 5V 2A power source to the USB-C port.

Figure 4.1: Attaching an NP-F battery to the unit.

Figure 4.2: Powering the unit via USB-C cable.

4.2 Unfolding Antennas

Before operation, gently unfold the antennas on both the transmitter and receiver units to ensure optimal signal performance.

Figure 4.3: Unfolding the antenna for operation.

4.3 Uključivanje/isključivanje napajanja

To power on the device, slide the power switch down. To power off, slide the switch up. The device will automatically reconnect to a previously paired device upon startup.

4.4 Uparivanje uređaja

The transmitter (TX) and receiver (RX) units typically come pre-paired. If re-pairing is necessary or for pairing additional receivers:

1. Provjerite da li su i predajnik i prijemnik uključeni.
2. Long press the pairing buttons on both the transmitter and receiver for 5 seconds to enter pairing mode.
3. Once paired, the screen will display "Paired".

Note: A single transmitter supports up to 4 receivers (including RX and APP monitoring devices). The device will exit pairing mode if no device is found within 90 seconds. Pair receivers one at a time.

4.5 Connecting to Equipment

1. Connect the HDMI cable from your camera or video source to the HDMI-IN port na predajniku.
2. Connect an HDMI cable from the receiver's HDMI OUT port to your monitor's HDMI-IN luka.

Figure 4.4: Transmitter connected to a camera.

Figure 4.5: Receiver connected to a monitor.

5. Rad sa sistemom

5.1 Monitoring Display

The 1.47-inch display on both units provides real-time status information, including:

• Transmitter (TX) / Receiver (RX) status
• Status WiFi veze
• Connection signal strength
• Nivo snage
• Resolution (e.g., 1080P)
• Frame Rate (e.g., 60fps)
• Bitstream (e.g., 1Mbps)

Figure 5.1: Display indicators for operational status.

5.2 Using the SYNCO Link App

The SYNCO Link App enhances your monitoring experience with additional features:

• Real-time monitoring on your smart device.
• Precise image adjustments (zebra stripes, mirror, inverse colors).
• Built-in video saving, screenshot, and playback functions.

Refer to the SYNCO Link App manual for detailed instructions on connecting and using the app.

5.3 Multi-User Monitoring

The system supports simultaneous wired and wireless transmission, enabling efficient collaboration. Real-time monitoring across multiple devices is ideal for directors, lighting designers, makeup artists, and art directors.

Figure 5.2: Multi-user monitoring setup.

6. Održavanje

• Keep the units clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Izbjegavajte izlaganje uređaja ekstremnim temperaturama, vlazi ili direktnoj sunčevoj svjetlosti.
• Store the units in a dry, cool place when not in use.
• Ensure all cables are properly connected and not strained.
• Regularly check for firmware updates from the manufacturer's official webstranicu kako bi se osigurale optimalne performanse i kompatibilnost.

7. Otkrivanje problema

8. Specifikacije

9. Zvanični video proizvoda

Watch the official product video for a visual guide on unboxing, product introduction, power options, ports, and operational procedures.

10. Garancija i podrška

Za informacije o garanciji, tehničkoj podršci ili upite o servisiranju, obratite se službenom SYNCO servisu. webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte račun za kupovinu u slučaju reklamacije.