KYORITSU AC Clamp Meter 2002PA Instruction Manual

1. prekoview

The KYORITSU AC Clamp Meter 2002PA is a versatile electrical measuring instrument designed for accurate measurement of AC current up to 2000A. It features a large teardrop-shaped core for easy clamping around conductors, a recorder output terminal, and multiple functions including AC/DC voltage, resistance, and continuity testing. This manual provides essential information for safe and effective use of the device.

Figure 1: KYORITSU AC Clamp Meter 2002PA

This image shows the KYORITSU AC Clamp Meter 2002PA, a black handheld device with a red clamp jaw at the top. The display shows "000" and there are several buttons below it. The device is designed for measuring electrical current without direct contact.

2. Sigurnosne informacije

Always read and understand this instruction manual before using the KYORITSU AC Clamp Meter 2002PA. Failure to follow safety instructions may result in electric shock, fire, or damage to the device. This product complies with IEC 61010-1, IEC 61010-031, IEC 61010-2-032, and IEC 61326-1 standards.

• Nemoj use the meter if it appears damaged or is operating abnormally.
• Nemoj primijeniti voltage or current exceeding the maximum rated values.
• Prije upotrebe provjerite je li poklopac baterije sigurno zatvoren.
• Always wear appropriate personal protective equipment (PPE) when working with electrical circuits.
• Nemoj use the meter in wet environments or during electrical storms.
• Refer to local and national safety codes for proper electrical work procedures.

3. Ključne karakteristike

• Large Teardrop Core: Olakšava lako čišćenjeamping around thick conductors.
• Mjerenje visoke struje: Capable of measuring large AC currents up to 2000A.
• Višenamjenski: Measures AC current, AC voltage, DC voltage, otpor i kontinuitet.
• Recorder Output Terminal: Allows connection to external recording devices.
• visoka rezolucija: Features a small resolution of 0.1A for precise measurements.
• Data Hold & Peak Hold: For capturing stable or peak readings.
• Automatska ušteda energije: Extends battery life by automatically turning off after a period of inactivity.

4. Podešavanje

4.1 Instalacija baterije

1. Pronađite poklopac odjeljka za baterije na stražnjoj strani mjerača.
2. Use a screwdriver (if required) to open the battery compartment.
3. Insert two AA (R6P, 1.5V) batteries, ensuring correct polarity.
4. Vratite poklopac odjeljka za baterije i čvrsto ga pričvrstite.

4.2 Connecting Test Leads (for Voltage/otpor/kontinuitet)

1. Insert the red test lead into the VΩ terminal.
2. Umetnite crni mjerni kabel u COM priključak.
3. Ensure connections are secure before taking measurements.

5. Uputstvo za upotrebu

5.1 Mjerenje naizmjenične struje

1. Turn the rotary switch to the "ACA" position.
2. Otvorite clamp čeljust pritiskom na polugu.
3. Unutar cl-a zatvorite samo jedan provodnik strujnog kola koje se mjeri.amp vilica.
4. Release the lever to close the clamp jaw securely around the conductor.
5. Očitajte vrijednost AC struje prikazanu na LCD ekranu.

5.2 Mjerenje AC Voltage

1. Turn the rotary switch to the "ACV" position.
2. Connect the test leads across the circuit points where voltage treba izmjeriti.
3. Pročitajte AC voltage vrijednost prikazana na LCD-u.

5.3 Mjerenje DC Voltage

1. Turn the rotary switch to the "DCV" position.
2. Connect the test leads across the circuit points where voltage is to be measured, observing polarity.
3. Pročitajte DC voltage vrijednost prikazana na LCD-u.

5.4 Mjerenje otpora

1. Okrenite rotacijski prekidač u položaj "Ω".
2. Prije mjerenja otpora provjerite je li strujno kolo bez napona.
3. Connect the test leads across the component or circuit path to be measured.
4. Očitajte vrijednost otpora prikazanu na LCD ekranu.

5.5 Test kontinuiteta

1. Turn the rotary switch to the "Continuity" position (often indicated by a speaker icon).
2. Osigurajte da je strujni krug bez napona.
3. Spojite mjerne kabele preko komponente ili putanje strujnog kola.
4. If continuity exists (resistance below approximately 50±35Ω), the buzzer will sound.

6. Održavanje

6.1 Čišćenje

• Wipe the meter with a soft, dry cloth.
• Nemoj koristite abrazivna sredstva za čišćenje ili otapala.

6.2 Zamjena baterije

• Kada se indikator baterije pojavi na ekranu, zamijenite baterije kao što je opisano u Odjeljku 4.1.
• Remove batteries if the meter will not be used for an extended period to prevent leakage.

7. Otkrivanje problema

8. Specifikacije

Figure 2: Detailed specifications for KYORITSU AC Clamp Meter 2002PA and 2002R (RMS).

This image displays a table of detailed specifications for the KYORITSU AC Clamp Meter models 2002PA and 2002R. It includes measurement ranges and accuracies for AC current, AC voltage, DC voltage, resistance, and continuity, along with physical dimensions, power source, and compliance standards.

9. Garancija i podrška

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official KYORITSU webSačuvajte račun kao dokaz o kupovini za reklamacije u slučaju reklamacije.