Powerology PPBCHA47

Uputstvo za upotrebu Powerology prenosnog kompresora za vazduh

Model: PPBCHA47

1. Uvod

Thank you for choosing the Powerology Portable Air Compressor Jump Starter. This multi-functional device is designed to provide reliable assistance in various emergency situations, including jump-starting vehicles and inflating tires. Please read this manual thoroughly before use to ensure safe and optimal performance.

Powerology Portable Air Compressor Jump Starter with cables and inflation hose

Figure 1.1: The Powerology Portable Air Compressor Jump Starter, showcasing its main unit, jump starter cables (red and black clamps), and the air inflation hose. The digital display is visible on the unit.

2. Sigurnosne informacije

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:

3. Proizvod je gotovview

3.1 Komponente

3.2 Ključne karakteristike

Close-up of the Powerology unit's digital display showing battery level, pressure units, and control buttons.

Slika 3.1: Detaljan view of the digital display on the Powerology unit, indicating battery charge, selectable pressure units (PSI, BAR, KPA, KG/CM²), and control buttons for mode selection and pressure adjustment.

4. Podešavanje

4.1 Početno punjenje

Before first use, fully charge the device. Connect the provided USB-C charging cable to the device's USB-C input port and the other end to a compatible USB power adapter (not included). The digital display will indicate the charging status. A full charge typically takes approximately 2 hours with a 20W PD charger.

Powerology unit charging a smartphone on a wooden table.

Figure 4.1: The Powerology device connected via USB-C cable to a smartphone, demonstrating its power bank functionality. The phone screen shows a charging indicator.

5. Uputstvo za upotrebu

5.1 Pokretanje vozila skokom

  1. Provjerite je li startni uređaj napunjen na najmanje 50%.
  2. Isključite paljenje vozila i svu dodatnu opremu.
  3. Spojite crveni (+) clamp na pozitivni (+) pol akumulatora vozila.
  4. Spojite crni (-) clamp na negativni (-) pol akumulatora vozila.
  5. Connect the smart cable connector to the jump starter port on the device.
  6. Start the vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than 3 consecutive starts.
  7. Once the vehicle starts, disconnect the smart cable from the jump starter, then remove the black (-) clamp, nakon čega slijedi crveni (+) clamp.
Powerology unit connected to a car battery for jump starting.

Figure 5.1: The Powerology device with its jump starter cables connected to a vehicle battery, illustrating the process of jump starting a car in an outdoor setting.

5.2 Napuhavanje guma

  1. Connect the air inflation hose to the device's inflation port.
  2. Attach the other end of the hose to the tire valve.
  3. Turn on the device. The digital display will show the current tire pressure.
  4. Use the '+' and '-' buttons to set the desired pressure.
  5. Pritisnite dugme za pokretanje da biste započeli naduvavanje. Uređaj će se automatski zaustaviti kada se dostigne podešeni pritisak.
  6. Odvojite crijevo od ventila gume i uređaja.
Powerology unit inflating a car tire.

Figure 5.2: The Powerology device positioned next to a car tire, with the inflation hose connected, demonstrating its use as an air compressor for tire inflation.

5.3 Korištenje kao Power Bank

Connect your electronic devices (e.g., smartphones, tablets) to the USB-A or USB-C output ports on the Powerology unit using a compatible charging cable. The device will automatically begin charging your connected device.

6. Održavanje

7. Otkrivanje problema

ProblemMogući uzrokRješenje
Uređaj se ne uključujeSlaba baterija ili nema napunjenostiU potpunosti napunite uređaj.
Vehicle does not jump startNetačan clamp connection; vehicle battery too low; engine too largeCheck connections; ensure device is fully charged; verify engine compatibility.
Tire not inflatingHose not securely connected; wrong pressure unit selected; hose kinkedEnsure hose is tight; check pressure unit; straighten hose.
Pregrijavanje uređajaProlonged use; blocked ventsAllow device to cool down; ensure vents are clear.

8. Specifikacije

FeatureDetalj
BrandPowerology
ModelPPBCHA47
Vrsta baterijeLitijum-jonski
Kapacitet baterije8800mAh
Peak Current800A
Maksimalni pritisak naduvavanja150 PSI
Brzina inflacije31.4 L/min
USB-C izlaz20W PD
Dimenzije proizvoda4.1 x 13.6 x 15.7 cm
Težina proizvoda740 g

9. Garancija i podrška

This Powerology product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official Powerology webSačuvajte račun kao dokaz o kupovini.