GOOLOO GP3000 Jump Starter and AP150 PRO Tire Inflator User Manual

1. Uvod

This manual provides essential information for the safe and effective operation of your GOOLOO GP3000 Jump Starter and GOOLOO AP150 PRO Portable Tire Inflator. Please read all instructions carefully before use and retain this manual for future reference.

2. Važne informacije o sigurnosti

Always observe the following safety precautions to prevent injury or damage to the devices:

• Do not immerse the devices in water or expose them to rain.
• Do not operate the devices if they are damaged.
• Čuvati van domašaja djece.
• Do not disassemble the devices. Refer all servicing to qualified personnel.
• Koristite samo isporučenu ili odobrenu dodatnu opremu.
• Osigurajte odgovarajuću ventilaciju tokom upotrebe i punjenja.
• Avoid short-circuiting the clamps of the jump starter.
• Nemojte pokušavati pokrenuti zamrznutu bateriju.
• Wear eye protection when operating the jump starter.
• The tire inflator can become hot during prolonged use. Allow it to cool before handling.

3. Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• GOOLOO GP3000 Jump Starter
• Smart Jumper Clamps
• GOOLOO AP150 PRO Portable Tire Inflator
• Air Nozzle Adapters (various types)
• USB-C kabl za punjenje
• Uputstvo za upotrebu
• Torbica za pohranu

4. Proizvod je gotovview

4.1 GOOLOO GP3000 Jump Starter

The GP3000 is a powerful 3000A peak current jump starter designed for 12-volt vehicles (up to 9-liter gasoline and 7-liter diesel engines). It also functions as a portable power bank and an emergency LED light.

Image: The GOOLOO GP3000 Jump Starter unit shown with its smart jumper clamps. The unit is black and yellow, featuring a power button and battery indicator lights.

Ključne karakteristike:

• Vršna struja od 3000A: Capable of starting large engines.
• "BOOST" Function: For completely dead or low-voltage baterije.
• Sistem višestruke zaštite: Includes over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, zaštita od preopterećenja i obrnutog punjenja.
• Prijenosni Power Bank: USB output ports for charging mobile devices.
• LED bljeskalica: With Normal, Strobe, and SOS modes.

Image: The GOOLOO GP3000 Jump Starter highlighting its comprehensive safety features, including icons for over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, spark-proof, over-voltage, zaštita od preopterećenja i obrnutog punjenja.

4.2 GOOLOO AP150 PRO Portable Tire Inflator

The AP150 PRO is a portable air compressor designed for fast and precise tire inflation. It features a dynamic LED display, multiple inflation modes, and also serves as a power bank and emergency light.

Image: The GOOLOO AP150 PRO Portable Tire Inflator shown with its various nozzle adapters and examples of vehicles and items it can inflate, such as cars, motorcycles, bicycles, and balls.

Ključne karakteristike:

• Super-Fast Inflation: High-performance motor for quick inflation.
• Dynamic Progress LED Display: Real-time tracking of inflation progress, visible even in bright sunlight.
• 5 načina naduvavanja: Car, motorcycle, bicycle, ball, and custom.
• 3 Pressure Units: PSI, KPA, BAR.
• Pametno automatsko isključivanje: Automatski se zaustavlja kada se dostigne unaprijed postavljeni pritisak.
• High-Efficiency Battery Management System (BMS): Ensures safe and reliable operation.
• 45 Minutes Wireless Continuous Inflation: Dugotrajne performanse baterije.
• 3-u-1 multifunkcionalni dizajn: Air pump, mobile power supply, and emergency LED light (lighting and SOS modes).

Image: The GOOLOO AP150 PRO Tire Inflator's large LED screen, illustrating its five different inflation modes (car, motorcycle, bicycle, ball, and custom) with corresponding icons and color changes.

5. Podešavanje i punjenje

5.1 Charging the GOOLOO GP3000 Jump Starter

Before first use, fully charge the GP3000. Connect the provided USB-C charging cable to the input port on the jump starter and to a USB wall adapter (not included). The battery indicator lights will illuminate to show charging progress. All lights will be solid when fully charged.

5.2 Charging the GOOLOO AP150 PRO Tire Inflator

Fully charge the AP150 PRO before initial use. Connect the provided USB-C charging cable to the charging port on the inflator and to a USB power source. The LED display will indicate the charging status. The device is fully charged when the battery icon shows full.

6. Uputstvo za upotrebu

6.1 Operating the GOOLOO GP3000 Jump Starter

1. Provjerite je li startni uređaj napunjen na najmanje 50%.
2. Povežite crvena clamp na pozitivni (+) pol akumulatora vozila.
3. Povežite crna clamp na negativni (-) pol akumulatora vozila.
4. Osigurajte clamps are securely connected and the smart cable indicator light is green.
5. If the indicator light is not green, or the vehicle battery is completely dead, press the BOOST button on the smart cable. Wait for the indicator light to turn green.
6. Pokrenite motor vozila.
7. Once the engine starts, immediately remove the smart clamps from the vehicle battery, first the black clamp, zatim crveni clamp.

Korištenje kao prijenosni Power Bank:

Connect your USB-powered devices to the USB output ports on the GP3000 using appropriate charging cables. The jump starter will automatically begin charging your devices.

Image: The GOOLOO GP3000 Jump Starter demonstrating its function as a portable power bank, charging various electronic devices like smartphones, tablets, and smartwatches.

Korištenje LED svjetla:

Press and hold the power button on the GP3000 to turn on the LED flashlight. Press again to cycle through Normal, Strobe, and SOS modes. Press and hold to turn off.

Image: A user operating the GOOLOO GP3000 Jump Starter's LED light function in a dark engine bay, illustrating its utility as an emergency light source with Normal, Strobe, and SOS modes.

6.2 Operating the GOOLOO AP150 PRO Tire Inflator

1. Ensure the AP150 PRO is sufficiently charged.
2. Connect the air hose to the inflator and securely screw the nozzle onto the tire valve stem.
3. Press the power button to turn on the inflator. The LED display will show the current tire pressure.
4. Press the 'M' button to select the desired inflation mode (car, motorcycle, bicycle, ball, or custom).
5. Koristite dugmad '+' i '-' da biste podesili ciljni pritisak.
6. Press the inflation button (often indicated by a fan icon) to start inflation. The display will show real-time pressure.
7. Uređaj za naduvavanje će se automatski isključiti kada se dostigne podešeni pritisak.
8. Unscrew the nozzle from the tire valve and disconnect the air hose.

Image: The GOOLOO AP150 PRO Portable Tire Inflator actively inflating a car tire, demonstrating its cordless and fast inflation capability. The digital display shows the pressure reading.

Image: The GOOLOO AP150 PRO Tire Inflator's display showing both the real-time tire pressure and the preset target pressure, with clear visibility even in bright sunlight, and highlighting its auto shut-off feature.

Using as a Portable Power Bank and LED Light:

The AP150 PRO can also charge small electronic devices via its USB output port. It includes an integrated LED light with lighting and SOS modes, activated by a dedicated button, for use in emergencies or low-light conditions.

7. Održavanje i skladištenje

• Clean the devices with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• Store both devices in a cool, dry place, away from direct sunlight and extreme temperatures.
• For optimal battery life, charge both devices every 3-6 months, even if not in use.
• Keep the charging ports and air nozzle free from dust and debris.

8. Otkrivanje problema

8.1 GP3000 Jump Starter Issues

• Vozilo se ne pokreće: Osigurati clamps are connected correctly and securely. Check if the jump starter has sufficient charge. Try using the BOOST function if the battery is completely dead.
• Pametni klamp indicator light is red: This indicates a reverse polarity connection or a short circuit. Disconnect and reconnect the clamps ispravno.

8.2 AP150 PRO Tire Inflator Issues

• Inflator se ne uključuje: Uvjerite se da je uređaj napunjen.
• Inflator does not start pumping: Check if the hose is securely connected to both the inflator and the tire valve. Ensure a target pressure is set and the inflation button is pressed.
• Netačno očitavanje pritiska: Ensure the nozzle is tightly screwed onto the tire valve to prevent air leakage.

9. Specifikacije

9.1 GOOLOO GP3000 Jump Starter

9.2 GOOLOO AP150 PRO Portable Tire Inflator

10. Garancija i podrška

GOOLOO products come with a standard warranty. For detailed warranty information, product support, or to report any issues, please visit the official GOOLOO website or contact their customer service directly. Contact information can typically be found on the product packaging or the GOOLOO brand store on Amazon.