OONO 16 Amp 2x12-pozicijski distribucijski modul terminalnog bloka D-1410 Korisnički priručnik

1. Uvod

This manual provides essential information for the safe and efficient use of the OONO 16 Amp 2x12 Position Terminal Block Distribution Module, Model D-1410. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

2. Sigurnosne informacije

Upozorenje: Electrical work should only be performed by qualified personnel. Failure to follow these safety guidelines may result in electric shock, fire, or personal injury.

• Uvijek isključite napajanje prije instaliranja, ožičenja ili servisiranja modula.
• Ensure all connections are secure to prevent loose wires and potential short circuits.
• Nemojte prekoračiti nazivnu zapreminutage (48V) or current (16 Amp) of the module.
• Use appropriate wire gauges (26AWG ~ 12AWG) for connections.
• Mount the module in a dry, protected environment, away from moisture and extreme temperatures.

3. Proizvod je gotovview

The OONO D-1410 is a 16 Amp, 48V, 2x12 position screw terminal block distribution module designed for AC/DC applications. It facilitates organized and efficient power distribution by allowing multiple connections from a single source. The module supports multiple module extension connections for larger systems.

3.1 Komponente

• Terminalni blokovi: Two rows of 12 screw terminals each (A1-A12, B1-B12) for connecting wires.
• Ulazno/izlazni terminali: Larger A and B terminals for main power input/output.
• PCB: FR-4 glass fiber printed circuit board.
• Montažne rupe: For securing the module.

Figure 1: OONO D-1410 Terminal Block Distribution Module. This image shows the overall view of the green terminal block module with its two rows of screw terminals and main A/B input/output points.

Figure 2: OONO D-1410 Terminal Block with A/B Inputs. A closer view highlighting the main A and B input/output terminals on the left side of the module.

Figure 3: OONO D-1410 Terminal Block Top View. This image provides an overhead perspective of the module, clearly showing all 24 screw terminals arranged in two parallel rows.

Figure 4: OONO D-1410 Terminal Block Bottom View. This image displays the underside of the PCB, showing the solder points and the model version "D-1410 Ver. 1.0".

4. Specifikacije

Figure 5: OONO D-1410 Terminal Block Dimensions. This diagram illustrates the physical dimensions of the module in millimeters, including screw and spacer details.

5. Postavljanje i instalacija

Follow these steps for proper installation of the OONO D-1410 module:

1. Isključivanje struje: Ensure all power sources to the circuit are disconnected before beginning installation. Verify with a voltage tester.
2. Montaža:
   • Identify a suitable, dry, and stable mounting surface.
   • Use the provided screws and nylon spacers to secure the module. The spacers help insulate the underside of the PCB from the mounting surface.
   • Ensure the module is firmly attached to prevent movement or strain on connections.
3. Wiring the Main Power:
   • Connect the main power input wires to the larger 'A' and 'B' terminals on the module.
   • Strip approximately 7mm of insulation from the wire ends.
   • Insert the stripped wire into the terminal opening and tighten the M3 screw securely. Ensure no stray wire strands are exposed.
4. Wiring Output Devices:
   • Connect the wires from your output devices (loads) to the individual A1-A12 and B1-B12 terminals.
   • Each 'A' terminal (A1, A2, etc.) is connected to the main 'A' input, and each 'B' terminal (B1, B2, etc.) is connected to the main 'B' input.
   • Maintain proper polarity for DC circuits.
   • Ensure wires are within the 26AWG ~ 12AWG range.
   • Tighten all terminal screws firmly.
5. Potvrda: Double-check all wiring for correctness, secure connections, and absence of short circuits before restoring power.

Figure 6: Typical Connection Use Method. This diagram illustrates how multiple OONO D-1410 modules can be interconnected to distribute power to various loads from a single source. It shows the main A and B lines feeding into the modules, which then distribute to individual loads.

Figure 7: OONO D-1410 Schematic. This schematic diagram shows the internal wiring of the terminal block, indicating that all 'A' terminals are common and all 'B' terminals are common, allowing for parallel distribution.

6. Uputstvo za upotrebu

Once the OONO D-1410 module is correctly installed and wired, operation is straightforward:

• Uključeno: After verifying all connections, restore power to the circuit.
• Distribucija struje: The module will distribute the input power from the main 'A' and 'B' terminals to all corresponding individual 'A' and 'B' output terminals.
• Load Operation: Connected devices will receive power according to their wiring.
• Nadgledanje: Periodically check connections for any signs of overheating or loose wires, especially during initial operation.

7. Održavanje

The OONO D-1410 module requires minimal maintenance. Regular inspections are recommended to ensure continued safe and reliable operation.

• Vizuelni pregled: Periodically inspect the module and all connections for any signs of damage, corrosion, or loose wires.
• čišćenje: If necessary, gently clean the module with a dry, soft cloth. Do not use liquids or abrasive cleaners. Ensure power is disconnected before cleaning.
• Zategnite veze: Over time, vibrations or temperature changes can cause screws to loosen. Periodically re-tighten all terminal screws, ensuring not to overtighten.

8. Otkrivanje problema

If you encounter issues with your OONO D-1410 module, consider the following troubleshooting steps:

9. Garancija i podrška

For warranty information or technical support regarding your OONO D-1410 Terminal Block Distribution Module, please contact OONO customer service through the retailer where the product was purchased or visit the official OONO website.

Proizvođač: CZH-LABS

Datum prve dostupnosti: 13. marta 2018