Uvod
Hvala na kupoviniasing the ET2 Loom E20982-BK LED Pendant Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Važne informacije o sigurnosti
Da biste smanjili rizik od požara, strujnog udara ili tjelesnih ozljeda, uvijek slijedite ove osnovne mjere opreza:
- UPOZORENJE: Isključite napajanje na prekidaču ili kutiji s osiguračima prije instalacije ili servisiranja.
- Svi električni priključci moraju biti u skladu s lokalnim propisima, uredbama ili Nacionalnim električnim kodeksom (NEC).
- Posavjetujte se s kvalificiranim električarem ako niste sigurni u proces instalacije.
- Ne instalirajte ovaj uređaj na vlažnim mjestima. Namijenjen je samo za upotrebu u zatvorenom prostoru.
- Pažljivo rukujte uređajem. Izbjegavajte ispuštanje ili izlaganje jakim udarcima.
- Do not attempt to modify the fixture or its components.
- Osigurajte da površina za montažu može podnijeti težinu uređaja.
Postavljanje i instalacija
This pendant light requires assembly and ceiling mounting. Professional installation is recommended.
Potreban alat:
- Odvijač (Phillips i Flathead)
- Skidači žice
- Električna traka
- Ljestve
- Voltage Tester
Koraci instalacije:
- Isključite napajanje: Pronađite prekidač koji kontrolira napajanje rasvjetnog tijela i isključite ga. Provjerite je li napajanje isključeno pomoću prekidača za glasnoću.tage tester.
- Pripremite montažnu površinu: Ensure the junction box is securely mounted to the ceiling and can support the fixture's weight.
- Assemble Fixture: Carefully unpack all components. Follow the specific assembly instructions provided in the packaging for your model. This typically involves attaching the pendant rings and cotton strands.
- Žične veze:
- Spojite uzemljenu žicu uređaja (obično golu bakrenu ili zelenu) na uzemljenu žicu kuće.
- Spojite neutralnu žicu uređaja (obično bijelu) na neutralnu žicu kuće (bijelu).
- Spojite žicu za grijanje uređaja (obično crnu) na žicu za grijanje kuće (crnu).
- Osigurajte sve spojeve žičanim maticama i električnom trakom.
- Učvršćenje: Carefully lift the fixture and attach the canopy to the junction box using the provided screws. Ensure all wires are tucked neatly into the junction box.
- Podesite visinu: Adjust the suspension cables to achieve the desired pendant height. Secure the cables according to the fixture's design.
- Vrati snagu: Once installation is complete and all connections are secure, restore power at the circuit breaker and test the light.
Slika 1: Prednja strana view of the ET2 Loom E20982-BK LED Pendant Light, showcasing its unique design with cross-threaded cotton strands and illuminated rings.
Uputstvo za upotrebu
The ET2 Loom E20982-BK LED Pendant Light is designed for simple operation.
- Uključivanje/isključivanje: Upravljajte rasvjetnim tijelom pomoću standardnog zidnog prekidača spojenog na strujni krug.
- LED tehnologija: This fixture uses integrated LED light sources, which are highly efficient and long-lasting. There are no bulbs to replace.
- Dimming: If connected to a compatible LED dimmer switch, the light output can be adjusted. Consult a qualified electrician for dimmer compatibility and installation.
Figure 2: The ET2 Loom E20982-BK LED Pendant Light illuminating a contemporary room, demonstrating its aesthetic and functional presence.
Njega i održavanje
Proper care will ensure the longevity and appearance of your ET2 Loom pendant light.
- čišćenje: Always turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or LED components.
- Njega LED dioda: The integrated LED light sources do not require replacement. If an LED component fails, contact customer support for assistance.
- inspekcija: Periodically check for any loose connections or damage to the fixture. If any issues are found, disconnect power and consult a qualified electrician or customer support.
Rješavanje problema
Ako imate problema sa svojom visećom lampom, pogledajte sljedeće uobičajene probleme i rješenja:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali. |
|
|
| Svjetlo neočekivano treperi ili se prigušuje. |
|
|
| Fixture makes humming noise. |
|
|
If these solutions do not resolve the issue, please contact ET2 customer support.
Specifikacije proizvoda
| Brand | ET2 |
| Naziv modela | E20982-BK (Loom) |
| Dimenzije proizvoda | 18.75 cm D x 18.75 cm Š x 15 cm V |
| Težina artikla | 4.4 funti |
| Materijal | Aluminum, PVC, Steel |
| Boja/završna obrada | Crna |
| Vrsta izvora svjetlosti | Integrisana LED |
| Broj izvora svjetlosti | 2 |
| Wattage | 21 W (ukupno) |
| Voltage | 120 Volts |
| Vrsta sobe | Living Room (also suitable for dining areas, bedrooms) |
| Unutrašnja/vanjska upotreba | Indoor |
| Obavezna montaža | Da |
| Vrsta montaže | Ceiling Mount |
| UPC | 783209321472 |
Informacije o garanciji
The ET2 Loom E20982-BK LED Pendant Light comes with a Ograničena garancija. For specific terms, conditions, and duration of the warranty, please refer to the warranty card included with your product packaging or visit the official ET2 webSačuvajte dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.
Korisnička podrška
If you have any questions, require technical assistance, or need to report a problem with your ET2 Loom E20982-BK LED Pendant Light, please contact ET2 customer support. You can typically find contact information on the manufacturer's webweb-mjestu ili u dokumentaciji vašeg proizvoda.
For more information, visit the official ET2 webstranica: www.et2lighting.com
