SPEEDBOX SpeedBox 3.3 B.Tuning for Yamaha (SB33BT_Y)

SpeedBox 3.3 B.Tuning for Yamaha User Manual

Model: SB33BT_Y

Brand: SPEEDBOX

1. Proizvod je gotovview

The SpeedBox 3.3 B.Tuning is an advanced tuning chip designed for e-bikes equipped with Yamaha Motors PW-X3, PW-S2, and also compatible with Yamaha YDX-Moro 05 and Yamaha Moro 07 models. This device allows users to set their own speed limit for electric assistance, enhancing the riding experience.

It features Bluetooth connectivity, enabling control and data analysis via the SpeedBox App.

SpeedBox 3.3 B.Tuning product with wiring and instruction sheet

Image: The SpeedBox 3.3 B.Tuning module, its wiring harness, and a portion of the installation instructions.

2. Kompatibilnost

The SpeedBox 3.3 B.Tuning is specifically designed for e-bikes with the following Yamaha motors:

Važna napomena:

Ovaj uređaj je NIJE kompatibilan with e-bikes and motors such as Yamaha UrbanRush, CrossCore, CrossConnect, Wabash, or YDX-Torc.

SpeedBox 3.3 B.Tuning connected to a Yamaha motor, with images of compatible Yamaha motors

Image: Visual representation of the SpeedBox 3.3 B.Tuning connected to a Yamaha e-bike motor, alongside illustrations of compatible Yamaha PW-X3, PW-S2, YDX-Moro, and YDX-Moro Pro motors.

3. Instalacija

Proper installation is crucial for the correct functioning of your SpeedBox. Detailed installation instructions are provided in the product package and on the official SpeedBox YouTube channel.

Before installing the SpeedBox into a brand new e-bike, it is recommended to ride at least 10 km on the e-bike without the tuning chip installed.

  1. Step 1: Prepare the E-bike. Remove the battery and disassemble necessary parts of the e-bike to gain access to the motor connectors.
  2. Step 2: Disconnect Motor Connectors. Carefully disconnect the motor connectors as illustrated in the provided instructions within the package.
  3. Step 3: Connect SpeedBox. Plug the SpeedBox module into the disconnected connectors. Ensure all connections are secure. Refer to the manual for specific wiring diagrams. Reassemble the e-bike to its original condition and reinstall the battery.
  4. Step 4: Activate Device. Activate the SpeedBox device on your e-bike's display. If using the B.Tuning version, activate it also within the SpeedBox App.
Four-panel image showing SpeedBox installation steps

Image: Step-by-step visual guide for installing the SpeedBox 3.3 B.Tuning, showing battery removal, connector disconnection, SpeedBox connection, and activation.

For a visual guide, please refer to the official SpeedBox YouTube channel: @SpeedBoxTuning

4. Uputstvo za upotrebu

4.1. Activation and Deactivation

The SpeedBox can be activated or deactivated using the mobile SpeedBox App or directly via the e-bike's display.

E-bike display showing 99 km/h for activated SpeedBox and 25 km/h for deactivated

Image: E-bike display examples showing the activated state (99 km/h) and deactivated state (25 km/h) of the SpeedBox.

4.2. Setting Maximum Speed Limit

You can adjust the maximum speed limit for electric assistance through the SpeedBox App or by manipulating the e-bike's display modes.

5. SpeedBox App

The SpeedBox App provides comprehensive control and data analysis for your e-bike when paired with the SpeedBox 3.3 B.Tuning module.

Screenshots of the SpeedBox App interface on smartphones

Image: Screenshots of the SpeedBox App displaying various features such as tuning control, trip data, and diagnostics.

The SpeedBox App is available for download on both Google Play Store and Apple App Store.

6. Održavanje i njega

The SpeedBox module is designed for durability and requires minimal maintenance. Keep the module and its connections clean and dry. Avoid exposing it to extreme temperatures or harsh chemicals.

Regularly check the physical connections to ensure they remain secure, especially after riding in challenging conditions.

7. Troubleshooting and Important Warnings

7.1. Ažuriranja firmvera

Upozorenje:

Do not update the firmware of your e-bike while the SpeedBox is installed or if you plan to use the SpeedBox. Updating the e-bike's firmware may lead to detection of the tuning device and potential malfunction. The warranty of SpeedBox products does not cover malfunctions caused by updating the motor's firmware.

7.2. Pravno odricanje od odgovornosti

Important Legal Notice:

E-bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths, and public places. Such use may be in conflict with applicable laws and regulations. The manufacturer and seller are not responsible for any damages or legal consequences resulting from the improper use of the SpeedBox product.

8. Specifikacije

FeatureDetalj
BrandSPEEDBOX
Naziv modelaSpeedbox Tuning
Broj dijelaSB33BT_Y
Dimenzije proizvoda (DxŠxV)1.38" x 0.98" x 0.31" (3.5 cm x 2.5 cm x 0.8 cm)
Težina artikla0.09 kilograma
BojaCrna
MaterijalPolipropilen
Tehnologija povezivanjaBluetooth
Unos ljudskog interfejsaButtons (via e-bike display)
Uključene komponenteEbike tuning chip

9. Garancija i podrška

9.1. Informacije o garanciji

The SpeedBox 3.3 B.Tuning comes with a 9-godišnja garancija proizvođačaMolimo sačuvajte dokaz o kupovini za potrebe reklamacije.

Note: The warranty does not cover malfunctions caused by updating the e-bike's motor firmware.

9.2. Korisnička podrška

For further assistance, technical support, or warranty inquiries, please visit the official SpeedBox webstranica:

www.speedbox-tuning.com

You can also find detailed installation videos and tips on their YouTube channel: @SpeedBoxTuning

Povezani dokumenti - SpeedBox 3.3 B.Tuning for Yamaha (SB33BT_Y)

Preview SpeedBox 3.1 B.Tuning for Specialized Installation Guide
Step-by-step installation guide for the SpeedBox 3.1 B.Tuning module for Specialized e-bikes. Learn how to install, set up, and pair your SpeedBox with the mobile app for enhanced e-bike performance.
Preview Guida all'installazione SpeedBox Tracker 1.0 per Panasonic
Vodič za detaljetagliata all'installazione del dispositivo SpeedBox Tracker 1.0 per e-bike Panasonic, che copre la configurazione dell'app, l'installazione hardware e la configurazione iniziale.
Preview SpeedBox 3.1 für Specialized E-Bike Installationsanleitung
Schritt-für-Schritt-Anleitung zur Installation und Einrichtung des SpeedBox 3.1 Tuning-Moduls auf Specialized E-Bikes. Beinhaltet Vorbereitung, Demontage, Installation, Funktionsprüfung und erweiterte Einstellungen.
Preview Guía de Instalación SpeedBox 3.2 para Bicicletas Specialized
Instrucciones detalladas paso a paso para instalar el módulo de tuning SpeedBox 3.2 en bicicletas eléctricas Specialized. Aprenda a desmontar componentes, instalar el dispositivo y ajustar la configuración.
Preview SpeedBox 1.0 for Impulse 2.0: E-bike Tuning Installation and Safety Guide
This guide provides detailed installation instructions for the SpeedBox 1.0 for Impulse 2.0 e-bike tuning module. It also includes crucial safety warnings, legal considerations, and usage restrictions for modified electric bicycles.
Preview SpeedBox 1.2 B.Tuning for Shimano E-Bike Systems: Connection Guide
Detaljna veza prekoview for the SpeedBox 1.2 B.Tuning module, compatible with Shimano E8000, E7000, E6100, and E5000 e-bike drive units. Includes wiring diagrams and component identification for installation.