1. Uvod
This user manual provides detailed instructions for the LINOVISION 24 Ports L2 Managed PoE Switch, Model POE-SW324GM-4BT. It covers product features, package contents, setup procedures, operating guidelines, maintenance tips, troubleshooting, and technical specifications. Please read this manual thoroughly before operating the device to ensure proper installation and functionality.
Slika 1.1: Prednja strana view of the LINOVISION 24 Ports L2 Managed PoE Switch.
2. Sadržaj paketa
Verify that all items listed below are included in your package. If any item is missing or damaged, please contact LINOVISION support.
- PoE Switch (POE-SW324GM-4BT)
- Adapter za napajanje
- Uputstvo za upotrebu
- Dodatna oprema za montažu u stalak
Image 2.1: Contents of the LINOVISION PoE Switch package, including the switch, power adapter, user manual, and rack mount accessories.
3. Proizvod je gotovview
3.1 Prednja ploča
The front panel of the LINOVISION POE-SW324GM-4BT features various ports and LED indicators for monitoring network activity and power status.
Slika 3.1: Detaljno view of the switch's front panel, highlighting the console port, 4x 90W Gigabit PoE ports (P1-P4), 20x 30W Gigabit PoE ports (P5-P24), and 4x Gigabit Combo ports (Uplink 1-4).
3.2 Zadnja ploča
The rear panel includes the power input, power switch, and a ground terminal for safety.
Image 3.2: Combined view of the front and rear panels. The rear panel shows the power switch, ground terminal, and AC power input.
4. Karakteristike
- 4 BT 90W PoE++ Ports: Ports 1-4 support up to 90W output, providing sufficient power for IEEE 802.3af/at/bt compliant PoE devices such as IP cameras, PTZ cameras, access points, VoIP phones, and PoE monitors.
- Built-in 370W PoE Power Budget: The switch features a maximum total PoE budget of 370W, with 4 BT 90W ports and 20 AT 30W ports, capable of supporting multiple high-power PoE devices.
- Full Gigabit Connectivity: Provides 4x 10/100/1000Mbps PoE++ ports, 20x 10/100/1000Mbps PoE+ ports, and 4x Combo Ports. Each Combo Port includes one RJ45 port and one SFP port, allowing selection of either based on network requirements, but not both simultaneously.
- L2 Managed Capabilities: Supports Layer 2 management functions including VLAN, QoS, ACL, and PoE control (On/Off). Management can be performed via WEB interface, Command Line Interface (CLI), or SNMP.
- Advanced Safety for PoE and Non-PoE Devices: Utilizes a standard 4-step PoE power-up process (PD Detection -> PoE Power Classification negotiation -> Start up -> Power ON). This ensures appropriate power delivery to 802.3af/at/bt devices, preventing overloading, and avoids supplying power to non-PoE devices to prevent damage.
- Solid and Durable Design: Features a full metal enclosure with dimensions of 17.32'' x 11.42'' x 1.75'' (440mm x 290mm x 44.5mm), and a built-in 370W power supply. It offers a wide operating temperature range (-10°C to 45°C), 64Gbps switching capacity, IP40 protection, and 6KV surge protection.
- Important PoE++ Compatibility Note: The term "PoE++" does not have a single unified standard and may not fully correspond to the IEEE 802.3bt protocol. Users should confirm if their "PoE++" Powered Device (PD) is also an IEEE 802.3bt device for guaranteed compatibility and proper operation.
Image 4.1: Illustration of the 4 BT 90W PoE ports and their compatibility with different PoE device types.
Image 4.2: Visual representation of the switch's PoE power distribution and total budget.
Image 4.3: Illustration of the switch's full Gigabit speed and the flexibility of its combo ports.
Slika 4.4: Primjerample of the L2 Management interface, demonstrating various configurable network settings.
Image 4.5: Graph detailing the safe power negotiation process for PoE devices.
Slika 4.6: Gotovoview of the switch's robust physical design and protective features.
5. Podešavanje
This section guides you through the initial setup of your LINOVISION PoE Switch.
5.1 Raspakivanje i početni pregled
Carefully unbox the switch and its accessories. Inspect all components for any signs of damage during transit. Refer to the 'Package Contents' section to ensure all items are present.
Video 5.1: This video demonstrates the unboxing process of the LINOVISION 24 Port L2 Managed BT 90W PoE Switch, showing how to safely remove the product and its accessories from the packaging.
5.2 Fizička instalacija
- Montaža: Use the provided rack mount accessories to install the switch into a standard 19-inch server rack, if applicable. Ensure adequate ventilation around the device.
- uzemljenje: Connect the ground terminal on the rear panel to a proper earth ground using a grounding wire for electrical safety.
- Priključak za napajanje: Connect the power adapter to the AC input on the rear panel and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.
5.3 Mrežne veze
- Connecting PoE Devices: Connect your IEEE 802.3af/at/bt compliant PoE devices (e.g., IP cameras, access points) to the PoE ports (P1-P24) on the front panel using standard Ethernet cables.
- Connecting Non-PoE Devices: Non-PoE network devices can also be connected to the PoE ports; the switch will automatically detect and not supply power to them.
- Uplink veze: Use the Gigabit Combo Ports (Uplink 1-4) to connect the switch to your core network, router, or other switches. You can use either the RJ45 or SFP port for each combo pair.
- Konzola konekcija: For initial configuration or advanced management via CLI, connect a console cable to the Console Port on the front panel and to a computer.
6. Uputstvo za upotrebu
Once the switch is physically installed and connected, you can begin operation and configuration.
6.1 Uključivanje
Flip the power switch on the rear panel to the ON position. The Power Indicator LED on the front panel should illuminate, indicating the device is receiving power. The System Indicator LED will also light up, and PoE/Link indicators will show port status.
6.2 L2 Management Access
The LINOVISION PoE Switch supports various Layer 2 management methods:
- Webupravljanje zasnovano na: Pristupite prekidaču web interfejs unošenjem njegove IP adrese u a web browser. The default IP address and login credentials can be found in the full user manual or quick start guide.
- Interfejs komandne linije (CLI): Connect via the Console Port using a terminal emulator (e.g., PuTTY) for command-line configuration.
- SNMP: The switch can be managed remotely using Simple Network Management Protocol (SNMP) for network monitoring and configuration.
6.3 Key Management Functions
Through the management interface, you can configure:
- VLAN (Virtualna lokalna mreža): Segmentirajte svoju mrežu za poboljšanu sigurnost i performanse.
- QoS (kvalitet usluge): Dajte prioritet mrežnom prometu za kritične aplikacije.
- ACL (Lista kontrole pristupa): Filter network traffic based on defined rules.
- PoE Control: Enable/disable PoE on specific ports, monitor power consumption, and schedule PoE operation.
7. Održavanje
Regular maintenance ensures the longevity and optimal performance of your LINOVISION PoE Switch.
- čišćenje: Održavajte prekidač čistim i bez prašine. Za čišćenje koristite meku, suhu krpu. Ne koristite tekuća ili aerosolna sredstva za čišćenje.
- ventilacija: Pazite da ventilacijski otvori nisu blokirani. Pravilan protok zraka je ključan za sprječavanje pregrijavanja.
- Ažuriranja firmvera: Periodically check the LINOVISION website for firmware updates. Keeping the firmware up-to-date can improve performance, add new features, and address security vulnerabilities.
- Uslovi okoline: Operate the switch within the recommended temperature and humidity ranges specified in the 'Specifications' section.
8. Otkrivanje problema
If you encounter issues with your LINOVISION PoE Switch, refer to the following common troubleshooting steps:
- Nema napajanja:
- Check if the power cable is securely connected to the switch and the power outlet.
- Provjerite je li prekidač za napajanje na zadnjoj ploči u položaju UKLJUČENO.
- Provjerite je li utičnica funkcionalna.
- Nema mrežne veze:
- Check the Ethernet cables for secure connections and damage.
- Verify the Link/Act LED indicators for the connected ports are active.
- Ensure IP address settings are correct if configured manually.
- PoE uređaj ne prima napajanje:
- Confirm the connected device is IEEE 802.3af/at/bt compliant.
- Check the PoE/Link indicator for the specific port.
- Ensure the total PoE budget (370W) is not exceeded by all connected devices.
- Verify PoE is enabled for the port in the L2 management interface.
- Pristup Web Problemi sa interfejsom:
- Provjerite da li je vaš računar na istom mrežnom segmentu kao i prekidač.
- Try pinging the switch's IP address to confirm network reachability.
- Obrišite keš memoriju preglednika ili pokušajte s drugim preglednikom.
If these steps do not resolve the issue, please consult the full user manual or contact LINOVISION technical support.
9. Specifikacije
Detailed technical specifications for the LINOVISION 24 Ports L2 Managed PoE Switch (POE-SW324GM-4BT).
| Atribut | Vrijednost |
|---|---|
| Dimenzije proizvoda | 17.32 x 11.42 x 1.75 inča (440 mm x 290 mm x 44.5 mm) |
| Težina artikla | 9.28 funte (4.21 kg) |
| Broj modela stavke | POE-SW324GM-4BT |
| Proizvođač | LINOVISION |
| PoE portovi | 4x BT 90W PoE++ ports, 20x AT 30W PoE+ ports |
| Uplink portovi | 4x Gigabit Combo Ports (RJ45/SFP) |
| Ukupni PoE budžet | 370W |
| Preklopni kapacitet | 64Gbps |
| Menadžment | L2 Managed (WEB, CLI, SNMP), supports VLAN, QoS, ACL, PoE Control |
| Enclosure | Full Metal, IP40 |
| Zaštita od prenapona | 6KV |
10. Garancija i podrška
LINOVISION products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official LINOVISION webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Detalji o garantnim rokovima i kanalima podrške obično su navedeni u dokumentaciji o kupovini ili na proizvođačevom website.
Manufacturer: LINOVISION
Za dodatnu pomoć posjetite: LINOVISION Official Store on Amazon
