MEDESCAN BPS01

Logotip MedeScana

MedeScan Smart Talking Blood Pressure Monitor

Uputstvo za upotrebu

Uvod

The MedeScan Smart Talking Blood Pressure Monitor is designed to provide accurate and convenient blood pressure and pulse rate measurements for home use. This device incorporates Intelligent Averages Technology for enhanced precision and features a talking function for ease of use. Please read this manual thoroughly before using the device to ensure proper operation and safety.

MedeScan Smart Talking Blood Pressure Monitor

Image: The MedeScan Smart Talking Blood Pressure Monitor with its digital display showing blood pressure and pulse readings, and control buttons.

Važne informacije o sigurnosti

Sadržaj paketa

Provjerite da li su sve komponente prisutne u paketu:

Components of MedeScan Blood Pressure Monitor

Image: The MedeScan Blood Pressure Monitor, arm cuff, and power adapter laid out, showing the complete package contents.

Setup

  1. Izvor napajanja: Insert 3 AA batteries into the battery compartment, ensuring correct polarity. Alternatively, connect the device to a power source using the provided AC adapter.
  2. User and Time Setting: Pritisnite SET button for 3 seconds to enter the setting mode. Choose User A or User B using the MEM button. Set the date and time using the MEM button to adjust values and SET za potvrdu.

Uputstvo za upotrebu

Priprema za mjerenje

Postavljanje manžete

  1. Place the cuff on your bare upper arm, 2–3 cm (approximately 1 inch) above the elbow.
  2. Ensure the tubing runs inside your arm and is aligned with the center of your inner arm.
  3. Manžetna treba biti čvrsta, ali ne previše stegnuta; trebali biste moći umetnuti dva prsta između manžetne i ruke.
Proper arm cuff placement for blood pressure measurement

Image: A person demonstrating the correct placement of the arm cuff on the upper arm, ensuring it is positioned properly for an accurate reading.

Uzimanje mjerenja

  1. Sit comfortably with your feet flat on the floor and your arm level with your heart.
  2. Pritisnite START/STOP dugme da biste započeli mjerenje.
  3. The cuff will automatically inflate and then slowly deflate. Remain still and silent during this process.
  4. Once the measurement is complete, your blood pressure (systolic and diastolic) and pulse rate will be displayed on the screen and announced by the talking function.
Person taking blood pressure measurement with MedeScan monitor

Image: A person seated, operating the MedeScan Blood Pressure Monitor to take a reading, with the cuff on their arm and their finger on the START/STOP button.

Viewing Past Readings (Memory Function)

Otkrivanje aritmije

Automatsko isključivanje

Održavanje

Rješavanje problema

ProblemMogući uzrokRješenje
Uređaj se ne uključuje.Batteries are low or incorrectly inserted; AC adapter not connected properly.Provjerite polaritet baterija, zamijenite baterije ili provjerite je li AC adapter sigurno priključen.
Netačna očitavanja.Incorrect cuff placement; movement during measurement; not resting before measurement.Ensure cuff is correctly placed, remain still and silent, rest for 10 minutes prior.
Manžeta se ne naduvava.Air tube disconnected; cuff not properly wrapped.Check that the air tube is securely connected to the monitor. Re-wrap the cuff snugly.

Specifikacije

Garancija i podrška

MedeScan products are designed to meet high quality standards. For warranty information and customer support, please refer to the warranty card included with your product or visit the official MedeScan website.

Također možete posjetiti MedeScan Store on Amazon za više informacija i podršku za proizvod.