MiBOXER C4

MiBOXER C4 RGB+CCT daljinski upravljač 2.4GHz Korisnički priručnik

Model: C4

1. Uvod

This manual provides detailed instructions for the proper use and maintenance of your MiBOXER C4 RGB+CCT Remote. This 2.4GHz wireless remote control is designed to manage compatible MiBOXER RGB+CCT lighting products, offering precise control over brightness, color temperature, and RGB colors across up to four independent zones.

Molimo vas da pažljivo pročitate ovaj priručnik prije upotrebe uređaja kako biste osigurali sigurnu i efikasnu upotrebu.

2. Sigurnosne informacije

  • Do not expose the remote to moisture or extreme temperatures.
  • Čuvati van domašaja djece.
  • Use only the specified battery type (2 x AAA batteries, not included).
  • Istrošene baterije odlažite odgovorno u skladu sa lokalnim propisima.
  • Ne pokušavajte rastavljati ili modificirati daljinski upravljač. To će poništiti garanciju.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

  • MiBOXER C4 RGB+CCT Remote Control
  • Korisnički priručnik (ovaj dokument)
MiBOXER C4 Remote and packaging

Image: The MiBOXER C4 remote control shown alongside its retail packaging and a small instruction leaflet.

4. Proizvod je gotovview

Familiarize yourself with the buttons and indicators on your C4 remote control.

Diagram of MiBOXER C4 Remote buttons and functions

Image: A diagram illustrating the MiBOXER C4 remote control with labels for its indicator light, brightness/CCT/RGB touch strip, ON button (Link/Unlink), and OFF button.

  • Indikatorsko svjetlo: Prikazuje trenutni način rada.
    • crveno: Brightness Mode
    • Žuto: CCT (Color Temperature) Mode
    • zeleno: RGB režim
  • Brightness/CCT/RGB Touch Strip: Used to adjust brightness, color temperature, or RGB color depending on the active mode.
  • ON Button (Link/Unlink):
    • Short Press: Turns the linked lights ON.
    • Continuous Short Press: Cycles through dimming modes (Brightness → CCT → RGB).
    • Press and Hold (within 3 seconds of powering on a light): Links the remote to the light.
  • Dugme OFF: Turns the linked lights OFF.

Note: If there is no operation for 3 seconds, the remote automatically returns to Brightness Mode.

5. Podešavanje

5.1 Instalacija baterije

  1. Pronađite odeljak za baterije na poleđini daljinskog upravljača.
  2. Otvorite poklopac baterije.
  3. Umetnite dvije (2) AAA baterije, pazeći na ispravan polaritet (+/-).
  4. Čvrsto zatvorite poklopac baterije.

5.2 Linking the Remote to Lights

To control your MiBOXER lights, the C4 remote must be linked to them. This process typically involves pairing the remote with the light fixture within a short timeframe after the light is powered on.

  1. Ensure the light fixture you wish to link is powered OFF.
  2. Power ON the light fixture.
  3. Within 3 seconds of powering on the light, press and hold the ON button on the C4 remote.
  4. The light should flash several times, indicating successful linking.
  5. If linking fails, power OFF the light, wait 10 seconds, and repeat steps 2-4.

Note: For multi-zone control, repeat the linking process for each zone or group of lights you wish to assign to a specific zone on the remote (if your light supports zone assignment).

6. Uputstvo za upotrebu

6.1 Uključivanje/isključivanje napajanja

  • To turn lights ON: Short press the ON dugme.
  • To turn lights OFF: Short press the OFF dugme.

6.2 Switching Modes (Brightness, CCT, RGB)

The C4 remote operates in three main modes, indicated by the color of the indicator light:

  • To cycle through modes: Continuously short press the ON button. The sequence is Brightness (Red) → CCT (Yellow) → RGB (Green).
  • The remote will automatically revert to Brightness Mode if no operation is performed for 3 seconds.

6.3 Podešavanje svjetline

When the indicator light is Crveni (Brightness Mode):

  • Slide your finger along the Brightness/CCT/RGB Touch Strip to increase or decrease the light intensity.

6.4 Adjusting Color Temperature (CCT)

When the indicator light is Žuta (CCT Mode):

  • Slide your finger along the Brightness/CCT/RGB Touch Strip to adjust the color temperature from warm white to cool white.

6.5 Adjusting RGB Color

When the indicator light is Zeleno (RGB Mode):

  • Slide your finger along the Brightness/CCT/RGB Touch Strip to select your desired RGB color.

7. Održavanje

  • čišćenje: Use a soft, dry cloth to clean the surface of the remote. Do not use abrasive cleaners or solvents.
  • Zamjena baterije: Replace batteries when the remote's response becomes sluggish or the indicator light dims. Always replace both AAA batteries simultaneously.
  • Skladištenje: Ako daljinski upravljač skladištite duži period, izvadite baterije kako biste spriječili curenje.

8. Otkrivanje problema

ProblemMogući uzrokRješenje
Daljinski upravljač ne reaguje.Prazne ili prazne baterije.
Remote not linked to lights.
Izvan opsega.
Zamijenite baterije.
Re-link the remote to the lights (see Section 5.2).
Move closer to the lights (within 30m).
Lights not changing color/brightness.Odabran je pogrešan način rada.
Light fixture not compatible.
Cycle through modes using the ON button until the correct indicator light color appears (Red for Brightness, Yellow for CCT, Green for RGB).
Ensure your light fixture is a MiBOXER RGB+CCT compatible product.
Linking fails.Timing issue during linking.
Light already linked to another remote/zone.
Ensure you press and hold the ON button within 3 seconds of powering on the light. Try again.
If the light was previously linked, you may need to unlink it first (refer to your light fixture's manual for unlinking procedures, as this remote does not have a dedicated unlink function).

9. Specifikacije

ModelC4
Bežična frekvencija2.4GHz RF
Kontrolna udaljenostDo 30 metara (98 stope)
Podržane zone4 Zones (with compatible MiBOXER products)
Napajanje2 x AAA baterije (nisu uključene)
KompatibilnostMiBOXER RGB+CCT controllers, gateways, and lighting products
Dimenzije140 mm x 40 mm x 7 mm (približno 5.51 x 1.57 x 0.28 inča)
TežinaApprox. 2.08 ounces (without batteries)
Broj modela stavkefebec019-685b-4f66-b1e2-c25abc047cee
MiBOXER C4 Remote dimensions diagram

Image: A technical drawing showing the dimensions of the MiBOXER C4 remote control in millimeters, along with its packaging dimensions.

10. Garancija i podrška

MiBOXER products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your product or visit the official MiBOXER webSačuvajte račun kao dokaz o kupovini.

For technical support, troubleshooting assistance, or inquiries about compatible products, please contact MiBOXER customer service through their official channels. Contact information can typically be found on the product packaging or the MiBOXER website.

Možete posjetiti MiBOXER trgovina na Amazonu for more information and product listings.

Povezani dokumenti - C4

Preview MiBoxer WL5 WiFi 5-u-1 kontroler LED trake - uputstvo za upotrebu i vodič za aplikaciju
Sveobuhvatni vodič za MiBoxer WL5 WiFi 5-u-1 LED kontroler za trake, koji obuhvata karakteristike, specifikacije, dijagrame ožičenja, kompatibilnost daljinskog upravljača i detaljna uputstva za MiBoxer mobilnu aplikaciju.
Preview MiBoxer HPS1-RF 24GHz Microwave Radar Presence Sensor
Detailed information on the MiBoxer HPS1-RF 24GHz Microwave Radar Presence Sensor, including features, specifications, and connection diagrams for single-unit and network applications.
Preview MiBoxer SPIB5 5-u-1 SPI+DMX LED kontroler: Karakteristike, podešavanje i upravljanje putem aplikacije
Sveobuhvatan vodič za MiBoxer SPIB5 5-u-1 SPI+DMX LED kontroler, koji pokriva njegove karakteristike, tehničke specifikacije, dijagrame povezivanja, upravljanje putem aplikacije putem TUYA, daljinsko uparivanje i integraciju glasovnog asistenta.
Preview Smart Wall Remote Controller Manual - WR01RF & WR02RF
User manual for the MiBoxer Smart Wall Remote Controller (Models WR01RF and WR02RF), detailing features, parameters, key functions, linking, unlinking, installation, and important attention points for LED lighting control.
Preview MIBOXER SPIW5-4 4-kanalni 5-u-1 SPI LED kontroler - uputstvo za upotrebu
Sveobuhvatno korisničko uputstvo za MIBOXER SPIW5-4 4-kanalni 5-u-1 SPI LED kontroler, koje obuhvata karakteristike, parametre proizvoda, dijagrame povezivanja, kontrolu putem aplikacije i postavke. Podržava WiFi+2.4G povezivost za integraciju pametnog doma.
Preview MIBOXER SPIB5 5-u-1 SPI+DMX LED kontroler - uputstvo za upotrebu
Detaljno korisničko uputstvo za MIBOXER SPIB5 5-u-1 SPI+DMX LED kontroler, koje obuhvata karakteristike, parametre proizvoda, dijagrame povezivanja, upravljanje putem aplikacije, glasovno upravljanje i sigurnosne upute.