Uvod
This manual provides detailed instructions for the GODIYMODULES TPA3116D2 Digital Power Amplifier Board. Designed for ease of use and high performance, this compact mono amplifier board features a TPA3116 digital power amplifier chip and an integrated volume potentiometer, making it suitable for a wide range of audio applications. Please read this manual thoroughly before operation to ensure proper setup and optimal performance.
Karakteristike
- Utilizes the TPA3116 digital power amplifier chip for efficient audio amplifikacija.
- Compact design, ideal for space-constrained projects.
- Integrated volume potentiometer for convenient audio level adjustment.
- Supports a wide working voltagOpseg DC 5V do 24V.
- Delivers a maximum output power of 100W in mono configuration.
Specifikacije
| Parametar | Vrijednost |
|---|---|
| Working Voltage | DC 5V-24V |
| Board Dimensions (L x W) | 45 mm x 33 mm (1.77 x 1.30 inča) |
| Ukupna visina (približno) | 22 mm (0.87 inča) |
| Maksimalna izlazna snaga | 100W (mono) |
| Čipset | TPA3116D2 |
| Vrsta montaže | Surface Mount |
| Broj modela stavke | BTL-100WFYY-002 |
Setup
Follow these steps to set up your TPA3116D2 Digital Power AmpLifier Board:
- Priključak za napajanje: Connect a DC power supply within the 5V-24V range to the VCC and GND terminals. Ensure correct polarity to prevent damage.
- Audio ulaz: Connect your audio source (e.g., smartphone, MP3 player) to the IN+ and IN- terminals.
- Izlaz zvučnika: Connect your mono speaker to the OUT+ and OUT- terminals. Ensure the speaker impedance is compatible with the amplifier.
Slika: Vrh view of the amplifier board, highlighting the input (IN), output (OUT), and power (VCC) connection points.
Image: A pair of TPA3116D2 amplifier boards, showcasing their compact size and integrated volume control.
Uputstvo za upotrebu
Once the board is correctly wired and powered on, you can begin operation:
- Podešavanje jačine zvuka: Use the integrated potentiometer knob to adjust the output volume. Rotate clockwise to increase volume and counter-clockwise to decrease it.
- Audio reprodukcija: Start playing audio from your connected source. The amplifier will output the sound through the connected speaker.
Slika: Ugaona view of the amplifier board, clearly showing the volume adjustment potentiometer.
Održavanje
Kako biste osigurali dugovječnost i optimalne performanse vašeg ampploča za spašavanje, slijedite ove smjernice za održavanje:
- Održavati suhom: Avoid exposing the board to moisture or liquids, which can cause short circuits and damage.
- Očistite nježno: Ako je potrebno čišćenje, koristite meku, suhu krpu. Nemojte koristiti jake hemikalije ili abrazivne materijale.
- Pažljivo rukujte: Avoid dropping or subjecting the board to strong impacts. When handling, minimize contact with electronic components to prevent static discharge.
- ventilacija: Ensure adequate airflow around the board, especially during extended operation, to prevent overheating.
Rješavanje problema
Ako naiđete na probleme sa svojim amplifier board, refer to the following common problems and solutions:
- Nema napajanja:
- Check if the DC power supply is connected correctly and providing voltage unutar raspona od 5 V do 24 V.
- Verify power supply polarity.
- Nema izlaza zvuka:
- Ensure the audio input source is active and connected properly to IN+ and IN-.
- Check speaker connections to OUT+ and OUT-.
- Confirm the volume potentiometer is not set to minimum.
- izobličeni zvuk:
- Verify that the input audio signal is not too strong, causing clipping.
- Check the power supply for stability; insufficient current can cause distortion.
- Osigurajte da impedancija zvučnika odgovara ampzahtjevi spasioca.
Garancija i podrška
This product is covered by a standard return policy. If you are not satisfied with your purchase, you may be eligible for a return or replacement within 30 days of receipt, subject to the seller's terms and conditions.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact the seller directly through the platform where the product was purchased. Provide your order details and a clear description of the issue for prompt assistance.
