1. Uvod
This manual provides essential information for the safe and effective use of your Ortur LU2-10A 10000mW Laser Module. Please read these instructions carefully before installation and operation. This laser module is designed for high-precision engraving and cutting with Ortur Laser Engravers.
2. Sadržaj paketa
Provjerite da li se u vašem paketu nalaze sve dolje navedene komponente:
Slika: Detaljna view of all components included in the Ortur LU2-10A Laser Module package, such as the laser module, laser shield, air assist, various screws, cables, and tools.
- LU2-10A Laser Module
- Laser Shield
- Air Assist
- Blok podrške
- Klizač
- OUC2.0
- Small Coupling
- 24V 2A adapter za napajanje
- Dedicated LaserWire
- Zračna cijev
- Cevni konektor
- Normal Adapter Cable
- Laser Backboard
- M3x5mm Screws*6 (Used for Slider)
- Thumb Screws*2
- M3x8mm Screws*4 (Used for OLM2S2)
- M3x12mm Screws*4 (Used for OLM2)
- Vezica za kablove*10
- M3 Gasket*1
- Ključ
- Objektiv
- Regulator protoka zraka
- OLM2/S2 OUC Exclusive Adapter Cable
3. Postavljanje i instalacija
This section guides you through the assembly and installation of the LU2-10A Laser Module onto your Ortur Laser Engraver. Ensure the engraver is powered off and disconnected from the power source before beginning installation.
3.1. Video tutorijal za instalaciju
Video: A detailed installation tutorial for the Ortur Laser Master 2 Pro S2 LU2-10A, demonstrating step-by-step assembly and connection procedures.
3.2. Laser Module Installation Steps
- Attach the laser module to the engraver's carriage.
- Secure the laser module using the provided thumbscrews.
- Insert the 5-pin terminal of the dedicated laser line into the laser module's port.
- Connect the other end of the laser line to the appropriate port on the engraver's control board.
- Install the laser shield onto the laser module to ensure eye protection during operation.
- Connect the air assist hose to the air intake port on the laser module and to an external air pump (not included).
Image: The Ortur LU2-10A Laser Module actively cutting a piece of wood, demonstrating its operational capability.
4. Uputstvo za upotrebu
The Ortur LU2-10A Laser Module offers powerful and precise capabilities for various materials.
4.1. Ključne karakteristike
- Široka kompatibilnost: Compatible with Ortur Laser Master 2, Ortur Laser Master 2 S2, Ortur Laser Master 2Pro S2, and Ortur Laser Master 3 Laser Engravers.
- Svestranost materijala: Engrave and cut acrylic, metal, wood, stainless steel, glass, ceramics, leather, food, paper, fabric, and more.
- Snažan izlaz: True 10000mW laser output for effective cutting and engraving.
- visoka preciznost: Compressed spot size of 0.05mm x 0.1mm for detailed work.
- Visoka efikasnost: Lightweight design (235g) allows for engraving speeds up to 15000mm/min.
- Dvostruko hlađenje ventilatorom: Optimized cooling system ensures stable long-term operation without overheating.
- Stabilan rad: 24V electrical system and high-quality cables support 24 hours of uninterrupted, consistent engraving.
4.2. Engraving and Cutting Capabilities
The LU2-10A module is capable of cutting various materials with significant thickness:
- Up to 30mm acrylic.
- Up to 20mm wood.
Image: An internal diagram illustrating how two 5.5W laser beams are combined using light combing lenses to achieve a true 10W output with a precise 0.05 x 0.1mm compressed spot.
Image: The Ortur LU2-10A Laser Module highlighting its air intake for cooling and its lightweight design (only 235g), contributing to high engraving speeds.
Slika: Prozirni view of the Ortur LU2-10A Laser Module, showing the internal arrangement of two 5.5W lasers combining to form a single 10W output beam.
Image: The Ortur LU2-10A Laser Module featuring its built-in air assist system, with an example showing a cleaner cut (labeled "Ours") compared to a cut without air assist (labeled "Other").
Image: A visual representation of the laser's compressed spot, showing its dimensions of 0.05mm x 0.1mm, which enables extreme precision in engraving.
5. Održavanje
Redovno održavanje osigurava optimalne performanse i produžava vijek trajanja vašeg laserskog modula.
- Čišćenje sočiva: Periodically clean the laser lens with a soft, lint-free cloth and appropriate lens cleaning solution to prevent residue buildup that can affect laser performance.
- Mlaznica za pomoć pri zraku: Ensure the air assist nozzle is clear of debris to maintain effective airflow during cutting and engraving.
- ventilatori za hlađenje: Check the dual cooling fans for dust accumulation and clean them gently to ensure proper heat dissipation.
- Inspekcija kablova: Regularly inspect all cables for any signs of wear, damage, or loose connections.
6. Otkrivanje problema
This section addresses common issues you might encounter with your Ortur LU2-10A Laser Module.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Laser ne radi ili je izlaz slab. |
|
|
| Inconsistent engraving/cutting results. |
|
|
| Air assist not functioning. |
|
|
7. Specifikacije
| Feature | Detalj |
|---|---|
| Dimenzije proizvoda | 4.72 x 1.97 x 1.73 inča |
| Broj modela stavke | Ortur-LaserMaster2-ProS2 (LU2-10A variant) |
| Težina artikla | 1.54 funte |
| Izlazna snaga lasera | 10000mW (10W) |
| Veličina komprimirane tačke | 0.05mm x 0.1mm |
| Brzina graviranja | Do 15000 mm/min |
| Sistem za hlađenje | Dual Fan Cooling |
| Električni sistem | 24V |
| Kompatibilnost | Ortur Laser Master 2, 2 S2, 2Pro S2, 3 |
8. Garancija i podrška
For warranty information, technical support, or further assistance, please refer to the official Ortur webweb-mjesto ili direktno kontaktirajte njihovu korisničku službu. Sačuvajte račun kao dokaz o kupovini.
Official Ortur Webstranica: www.ortur.net
