1. Uvod
The ANENG VD807 is a versatile contactless voltage tester designed for electrical equipment testing and maintenance. This device features an LCD display, an integrated flashlight, and provides audible and visual alarms for voltage detection. It is suitable for identifying live/neutral wires and locating wire breakpoints, making it an essential tool for electricians and homeowners.
2. Sigurnosne informacije
Važne sigurnosne mjere:
- This device meets CAT II 1000V and CAT IV 600V IEC rated standards, ensuring reliable performance and adherence to safety regulations.
- Always exercise caution when working with electricity. Do not rely solely on the tester for safety; always follow proper electrical safety procedures.
- The alert feature provides a warning for voltages. When triggered, the screen turns red and a safety symbol glows, alerting the user of possible high voltage opasnosti.
- Ne koristite uređaj ako izgleda oštećeno ili ako ne funkcioniše ispravno.
- Održavajte uređaj suvim i čistim.
3. Proizvod je gotovview
The ANENG VD807 is a compact and convenient tool for electrical testing. Key features include:
- Contactless Voltage Detekcija (NCV): Otkriva AC voltage bez direktnog kontakta.
- LCD ekran: Provides clear visual feedback, including voltage levels and detection status.
- Two-Color Screen: Green screen indicates a zero line, while a red screen indicates a live line.
- Integrisana svjetiljka: Assists in working in dimly lit areas.
- Audible and Light Alarms: Pruža jasne indikacije volumenatage prisustvo.
- Pronalazač prekidnih tačaka žice: Helps locate breaks in electrical wires.
- Pocket-sized Design: Jednostavan za nošenje i upotrebu.
Image: The ANENG VD807 tester showing its use in maintenance work and the removable pen cap feature.
4. Podešavanje
4.1 Instalacija baterije
The ANENG VD807 requires two (2) 1.5V AAA batteries for operation. To install or replace batteries:
- Unscrew the battery compartment cap located at the bottom of the tester.
- Umetnite dvije AAA baterije od 1.5 V, pazeći na ispravan polaritet (+/-).
- Securely screw the battery compartment cap back into place.
Uređaj je sada spreman za upotrebu.
5. Uputstvo za upotrebu
5.1 Uključivanje/isključivanje napajanja
Press the power button (usually marked with a power symbol) to turn the device on. Press and hold the button to turn it off. The LCD display will illuminate upon activation.
5.2 Non-Contact Voltage (NCV) Detekcija
Za detekciju jačine zvuka naizmjenične strujetage bez direktnog kontakta:
- Uključite tester.
- Position the sensing tip of the tester near an AC power outlet, a terminal, or an AC cable.
- The tester will detect AC signals. LED lights will activate, and beeps will sound with varying frequencies depending on the detected voltage snaga.
Image: The ANENG VD807 demonstrating non-contact voltage (NCV) induction near an electrical outlet.
Image: The ANENG VD807 detecting AC voltage by positioning its tip near a live point.
5.3 Identifikacija fazne/nulne žice
The live wire detector automatically identifies live or neutral wires. When the tip is near a live wire, the tester will indicate a stronger signal (faster beeps, brighter LEDs, red screen). A neutral wire will typically show no or a very weak signal (green screen).
5.4 Pronalaženje tačaka prekida žice
Da biste pronašli tačku prekida u žici:
- Ensure the wire is energized (live).
- Pomičite tester duž cijele žice.
- Tester će pokazati volumentage presence up to the point of the break. The signal will cease or significantly weaken past the breakpoint.
Image: Two ANENG VD807 testers illustrating the process of finding a line breakpoint in a cable.
5.5 LCD Display Interpretation
The LCD display provides visual cues for detection:
- Zeleni ekran: Typically indicates a zero line or low voltage detekcija.
- crveni ekran: Indicates a live line or higher voltage detection, often accompanied by a safety symbol for high voltage opasnosti.
- The display may also show signal strength bars and voltage očitavanja.
Image: The ANENG VD807's two-color display screen, showing green for a zero line and red for a live line.
5.6 Funkcija svjetiljke
The integrated LED flashlight can be activated to illuminate dark work areas. Refer to the device's specific button layout for flashlight activation (often a dedicated button or a long press of the power button).
Image: The ANENG VD807 with its LED flashlight illuminated, providing light for inspection.
6. Održavanje
- čišćenje: Obrišite uređaj suhom, mekom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
- Skladištenje: Čuvajte tester na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
- Zamjena baterije: Replace batteries promptly when the low battery indicator appears to ensure accurate readings. Remove batteries if the device will not be used for an long period.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Uređaj se ne uključuje. | Prazne ili nepravilno instalirane baterije. | Zamijenite baterije novim 1.5 V AAA baterijama, pazeći na ispravan polaritet. |
| Inconsistent or no voltage detekcija. | Low battery, interference, or incorrect usage. | Replace batteries. Ensure no strong electromagnetic interference. Position the tip closer to the voltage izvor. |
| Svjetiljka ne radi. | Low battery or flashlight function not activated. | Replace batteries. Refer to operating instructions for flashlight activation. |
8. Specifikacije
| Brand | ANENG |
| Broj modela | VD807 |
| Težina artikla | 59 g |
| Dimenzije paketa | 19.71 x 8 x 2.39 cm |
| Izvor napajanja | Napajanje baterijama (2 x 1.5 V AAA) |
| Sigurnosni standardi | CAT II 1000V, CAT IV 600V IEC rated |
| Uključene komponente | 1X pen voltage tester, 2X 1.5V AAA battery, 1X user manual |
9. Garancija i podrška
ANENG provides lifetime service and technical support for the VD807 Contactless Voltage Tester. For any inquiries, troubleshooting assistance, or warranty claims, please contact ANENG customer service through their official channels.
