VTOMAN V10 Pro 4500A Prijenosni Jump Starter Uputstvo za upotrebu

1. Uvod

The VTOMAN V10 Pro 4500A Portable Jump Starter is a versatile device designed to jump-start 12V vehicles, including all gasoline engines and diesel engines up to 10.0 liters. Beyond its primary function, it also serves as a power bank for charging electronic devices and features an integrated LED light for emergencies. This manual provides essential information for safe and effective use of your V10 Pro Jump Starter.

Figure 1: VTOMAN V10 Pro 4500A Jump Starter with smart clampi torbica za nošenje.

2. Važne informacije o sigurnosti

Molimo vas da pročitate i razumjete sve sigurnosne informacije prije upotrebe ovog proizvoda. Nepoštivanje ovih uputa može dovesti do strujnog udara, požara ili ozbiljnih povreda.

2.1 Ugrađene sigurnosne zaštite

The VTOMAN V10 Pro is equipped with 10 advanced safety technologies to ensure user safety and prevent damage to the device or vehicle:

• Spark-Proof Protection: Prevents sparks during connection.
• Zaštita od obrnutog polariteta: Alerts to incorrect battery terminal connections.
• Zaštita od prekomjerne struje: Zaštita od prekomjernog protoka struje.
• Zaštita od prekomjernog punjenja: Sprečava prepunjavanje baterije.
• Over-Voltage Zaštita: Štiti od volumnatage prenapone.
• Zaštita od preopterećenja: Sprečava oštećenja uzrokovana prevelikim opterećenjem.
• Zaštita od visokih temperatura: Shuts down if internal temperature exceeds safe limits.
• Zaštita od niskih temperatura: Obezbjeđuje siguran rad u hladnim uslovima.
• Zaštita od kratkog spoja: Sprečava oštećenja od kratkih spojeva.
• Zaštita od obrnutog punjenja: Sprečava povratak struje u startni uređaj.

Figure 2: Visual representation of the 10 advanced safety technologies.

2.2 Opće mjere opreza

• Ne koristite startni uređaj ako je oštećen.
• Čuvati van domašaja djece.
• Ne uranjajte jedinicu u vodu.
• Nemojte rastavljati jedinicu.
• Koristite samo priložene pametne kablove za paljenje.
• Osigurajte odgovarajuću ventilaciju tokom upotrebe.

3. Proizvod je gotovview

The VTOMAN V10 Pro is a compact and powerful device. Familiarize yourself with its components:

• Glavna jedinica: The portable power pack with integrated display and ports.
• Pametni kablovi za paljenje: Red (positive) and Black (negative) clamps with an intelligent indicator.
• USB-C na USB-C kabel: For charging the jump starter and other devices.
• USB-A na USB-C kabel: For charging the jump starter and other devices.
• Carrying Box: Za praktično skladištenje i transport.
• Uputstvo za upotrebu: Ovaj dokument.

Figure 3: VTOMAN V10 Pro Jump Starter and included accessories.

3.1 Priključci i indikatori

• Utičnica za pokretanje: Za spajanje pametnih kablova za paljenje.
• Indicator Switch: Prikazuje nivo baterije.
• USB-C Input (Output) Port (PD15W): For charging the jump starter or external devices.
• Dual USB-A Quick Charging Outputs: Za punjenje eksternih uređaja.
• Izlazni port 15V/10A DC: For powering 12V accessories.
• LED bljeskalica: Multi-mode illumination.

Slika 4: Detaljno view of the VTOMAN V10 Pro ports and indicators.

4. Charging the VTOMAN V10 Pro

Ensure your jump starter is fully charged before use. A full charge takes approximately 5 hours.

4.1 Charging at Home

Connect the provided USB-C cable to the USB-C Input (Output) Port on the jump starter and plug the other end into a compatible USB wall adapter (not included).

Slika 5: Punjenje startera pomoću adaptera za zid.

4.2 Charging in Car

You can also charge the jump starter using a car charger (not included) by connecting it to the USB-C Input (Output) Port.

Figure 6: Charging the jump starter in a car.

5. Uputstvo za upotrebu

5.1 Jump Starting a Vehicle (Regular Mode)

1. Insert the smart jumper cable into the jump start socket on the V10 Pro.
2. Spojite crveni clamp na pozitivni (+) pol akumulatora vozila.
3. Spojite crni clamp na negativni (-) terminal akumulatora vozila.
4. Ensure the indicator light on the smart clamp is solid green, indicating a correct connection. If it's a red light, check connections.
5. Pokrenite motor vašeg vozila.
6. Čim se vozilo pokrene, odmah uklonite pametni ključ.amps from the vehicle battery, then disconnect the smart cable from the jump starter.

Figure 7: Regular mode jump starting process.

5.2 Using the Boost Function (For Totally Dead Batteries)

If your vehicle battery is completely dead or the voltage is too low to detect, use the Boost function:

1. Follow steps 1-3 from "5.1 Jump Starting a Vehicle".
2. If the indicator light is flashing green, press and hold the "BOOST" button on the smart clamp for 3 seconds until it turns solid green.
3. Start your vehicle's engine within 30 seconds.
4. Čim se vozilo pokrene, odmah uklonite pametni ključ.amps from the vehicle battery, then disconnect the smart cable from the jump starter.

Figure 8: Boost mode jump starting process for completely dead batteries.

5.3 Korištenje kao Power Bank

The V10 Pro can charge various electronic devices:

• USB-C/PD15W Output: Connect your USB-C compatible devices for fast charging.
• Dual USB-A Quick Charging Outputs: Connect your USB-A compatible devices for quick charging.
• Izlaz 15V/10A istosmjerne struje: Power 12V accessories like air compressors or car refrigerators.

Figure 9: The V10 Pro functioning as a versatile power bank.

5.4 Korištenje LED svjetiljke

Integrisana LED lampa nudi više načina rada za različite situacije:

• Normalni način rada: Provides steady illumination.
• Strobe mod: Trepćuće svjetlo za signalizaciju.
• SOS način rada: International distress signal.

To activate, press the flashlight button. Cycle through modes by pressing the button again.

Figure 10: The V10 Pro's LED flashlight with various modes.

6. Specifikacije

7. Otkrivanje problema

Ako naiđete na probleme sa svojim VTOMAN V10 Pro, pogledajte sljedeće uobičajene probleme i rješenja:

• Jump Starter Does Not Turn On: Ensure the device is charged. If the battery is completely depleted, it may require a few minutes of charging before it can power on.
• Smart Clamp Indicator Shows Red Light: This indicates an incorrect connection. Check that the red clamp je spojen na pozitivni (+) terminal i crni clamp to the negative (-) terminal of the vehicle battery. Ensure clamps su sigurno pričvršćeni.
• Vehicle Does Not Start After Connecting:
  • Confirm the jump starter has sufficient charge.
  • Provjerite jesu li svi priključci sigurni i ispravni.
  • If the vehicle battery is totally dead, use the Boost function as described in Section 5.2.
  • The vehicle battery may be severely damaged and require replacement.
• External Devices Not Charging: Ensure the V10 Pro has sufficient charge. Check that the charging cables are properly connected to both the jump starter and the external device.

8. Održavanje i skladištenje

Proper maintenance and storage will extend the lifespan of your VTOMAN V10 Pro:

• čišćenje: Obrišite uređaj suhom, mekom krpom. Ne koristite jake hemikalije ili abrazivne materijale.
• Punjenje: For optimal battery health, fully charge the device every 3-6 months, even if not in use. The device maintains a charge for up to 24 months.
• Skladištenje: Store the jump starter in its carrying box in a cool, dry place, away from direct sunlight, heat sources, and moisture.
• temperatura: Avoid storing or operating the device in extreme temperatures outside the recommended range of -4℉ to 140℉.

9. Garancija i podrška

VTOMAN is committed to providing high-quality products and customer satisfaction.

• garancija: The VTOMAN V10 Pro comes with an 18-month warranty.
• Garancija povrata novca: Iskoristite 30-dnevnu garanciju povrata novca iz bilo kojeg razloga.
• tehnička podrška: Lifetime technical support is available for all VTOMAN products.
• Služba za korisnike: Expect a quick reply within 24 hours for any inquiries.

For further assistance or to claim warranty, please contact VTOMAN customer support through the official webweb-stranicu ili vašu platformu za kupovinu.

10. Video o proizvodu