1. Uvod
Thank you for choosing the AQQA DC Aquarium Water Pump. This manual provides essential information for the safe and efficient operation of your pump. Designed for versatility, this pump is suitable for various aquatic environments, including freshwater and saltwater aquariums, ponds, fountains, and hydroponic systems. Its smart control features, quiet operation, and durable design ensure reliable performance.
Image 1: AQQA DC Aquarium Water Pump, showing the pump unit, external controller, and two interchangeable nozzles.
2. Sigurnosne informacije
Please read all safety instructions carefully before operating the pump. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the power supply before performing any maintenance, installation, or cleaning.
- Ensure the pump is fully submerged in water during operation to prevent dry burning and damage.
- Ne koristite pumpu ako je kabel za napajanje ili utikač oštećen.
- This pump is designed for indoor use in aquatic environments only. Do not use it for purposes other than those specified.
- Čuvati van domašaja djece.
- The pump operates on a 12V DC low-voltage output, reducing shock risks. However, always handle electrical components with care.
3. Sadržaj paketa
Provjerite da li se sve stavke nalaze u vašem paketu:
- 1 x AQQA DC Aquarium Water Pump
- 1 x Vanjski kontroler
- 2 x Interchangeable Nozzles (6/8mm and 10/12mm)
- 1 x Power Cord (approximately 10.83 ft)
- 1 x Uputstvo za upotrebu
4. Proizvod je gotovview
The AQQA DC Aquarium Water Pump is a compact and efficient submersible pump featuring an external controller for easy operation.
Pump Unit Features:
- Potopljeni dizajn: IP68 waterproof rating for continuous underwater operation.
- tihi rad: Pure copper motor ensures low noise levels (<30dB).
- Vazdušne čašice: Four strong suction cups on the base for secure placement.
- Dizajn niskog nivoa vode: Capable of operating effectively at water levels as low as 1.5cm (0.59 inches), allowing for thorough drainage.
- Zaštita od suhog sagorijevanja: Automatically shuts off if water levels are too low to prevent damage.
Image 2: The AQQA pump unit highlighting its anti-dry burning protection feature, which prevents damage when water levels are too low.
External Controller Features:
- Dugme za uključivanje/isključivanje: Powers the pump on or off.
- Flow Adjustment Buttons (+/-): Adjusts water flow rate across 4 levels.
- Dugme FEED: Activates feeding mode, pausing the pump for 10 minutes.
- Indikatorska svjetla: Display current flow rate/lift level and feeding mode status.
Image 3: Close-up of the external controller, showing the ON/OFF, flow adjustment (+/-), and FEED buttons, along with indicator lights for flow rate and feeding mode.
5. Podešavanje
Follow these steps to install your AQQA DC Aquarium Water Pump:
- Odaberite mlaznicu: Select the appropriate nozzle (6/8mm or 10/12mm) for your tubing system and securely attach it to the pump's outlet.
- Poziciona pumpa: Place the pump unit at the desired location within your aquarium, pond, or water feature. Ensure it is fully submerged. The four suction cups on the base will help secure it to a clean, smooth surface.
- Povežite kontroler: Connect the pump's cable to the external controller.
- Priključite napajanje: Plug the power cord from the controller into a suitable electrical outlet (110V-240V).
- Provjerite nivo vode: Ensure the water level is sufficient to cover the pump completely. The pump can operate at low water levels (down to 1.5cm) but full submersion is recommended for optimal performance and longevity.
Image 4: The AQQA pump demonstrating its ability to operate effectively at low water levels, with all-around suction at the bottom to remove dirt.
6. Uputstvo za upotrebu
The external controller provides easy access to all pump functions.
Uključivanje/isključivanje:
- Pritisnite ON/OFF button once to turn the pump on or off.
Podešavanje protoka:
- Koristite + button to increase the flow rate.
- Koristite - button to decrease the flow rate.
- There are 4 adjustable flow levels, indicated by the lights on the controller.
Način hranjenja:
- To activate feeding mode, press and hold the FEED dugme na 5 sekunde.
- The pump will pause for 10 minutes, allowing fish to feed without strong currents.
- After 10 minutes, the pump will automatically restart at its previous flow setting.
Video 1: Demonstrates the AQQA DC Water Pump's internal circulation, ultra-quiet operation, oxygen generation, wave-making capability, and the feeding mode function with the external controller.
7. Održavanje
Regular cleaning and maintenance will ensure the longevity and optimal performance of your pump.
- Isključite napajanje: Uvijek isključite pumpu iz električne utičnice prije bilo kakvog održavanja.
- Rastavite pumpu: The pump is designed for tool-free disassembly. Gently remove the filter cover and then the impeller assembly.
- Čiste komponente: Rinse all parts (impeller, filter cover, pump housing interior) under clean water. Use a soft brush to remove any accumulated debris, algae, or mineral deposits. Ensure the impeller spins freely.
- ponovo sastaviti: Carefully reassemble the pump, ensuring all parts fit correctly.
- Redovne provjere: Periodically check the pump and tubing for any blockages or wear.
Slika 5: Rastavljeno view of the AQQA pump, illustrating how to easily disassemble the outlet nozzle, filter cover, and motor for cleaning without tools.
8. Otkrivanje problema
Ako naiđete na probleme s pumpom, pogledajte sljedeće uobičajene probleme i rješenja:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Pumpa se ne pokreće | No power; Impeller jammed; Dry burning protection activated. | Check power connection; Disconnect and clean impeller; Ensure pump is fully submerged. |
| Niska brzina protoka | Blockage in pump or tubing; Flow rate set too low; Impeller worn. | Clean pump and tubing; Increase flow rate using controller; Inspect/replace impeller if necessary. |
| Pretjerana buka | Debris in impeller; Pump not securely placed; Air trapped in pump. | Clean impeller; Re-secure pump with suction cups; Gently shake pump to release air. |
| Pumpa se povremeno zaustavlja | Dry burning protection; Overheating; Loose connection. | Check water level; Ensure adequate ventilation (if applicable); Check all electrical connections. |
9. Specifikacije
| Feature | Specifikacija |
|---|---|
| Broj modela | AQ169 |
| Snaga | 25 Watts |
| Maksimalni protok | 2200 litara na sat (480 GPH) |
| Maksimalna visina podizanja | 7.2 stopa |
| Voltage Ulaz | 110-240V / 50-60Hz |
| Voltage Izlaz | 12V DC |
| Dimenzije proizvoda | 2.6 cm D x 2 cm Š x 3 cm V |
| Težina artikla | 12.8 unce |
| Materijal | akrilonitril butadien stiren (ABS) |
| IP Rating | IP68 |
| Veličine mlaznica | 6/8 mm, 10/12 mm |
| Dužina kabla za napajanje | 10.83 ft |
10. Garancija i podrška
AQQA stands behind the quality of its products. For specific warranty details and terms, please refer to the warranty information provided at the time of purchase or visit the official AQQA website.
If you require technical assistance, have questions about your product, or need to report an issue, please contact AQQA customer support through the retailer where you purchased the product or via the contact information available on the official AQQA website.
Please have your model number (AQ169) and purchase date ready when contacting support.
