LINOVISION POE-SW304G-4BT

LINOVISION 4 Ports Full Gigabit PoE++ Switch (Model: POE-SW304G-4BT) - Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your LINOVISION 4 Ports Full Gigabit PoE++ Switch, model POE-SW304G-4BT. Please read this manual thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.

Ključne karakteristike:

  • BT 90W PoE++: All 4 ports support BT 90W output, providing sufficient power for all IEEE 802.3af/at/bt PoE devices, including IP cameras, PTZ cameras, APs, VoIP phones, PoE lights, and PoE monitors. Total PoE budget is 96W.
  • Full Gigabit: Provides 4x 10/100/1000Mbps PoE++ ports, 1x 1000Mbps RJ45 uplink, and 1x Gigabit SFP uplink port.
  • Top Safety: Standard PoE design ensures proper power delivery to 802.3af/at/bt devices and prevents power to non-PoE devices, avoiding damage.
  • PoE Extend Mode: Enables 820ft (250m) long-distance PoE transmission at 10Mbps, suitable for IP cameras.
  • Plug and Play: No configuration required; automatically works with PoE/PoE+/PoE++ devices.
  • Solid Design: Full metal enclosure with fanless design (7.95'' x 5.51'' x 1.75''), built-in 96W power.
  • 6KV Surge Protection: Shields against power surges, lightning strikes, and voltage spikes for reliable operation in harsh environments.
  • Important Note on PoE++: The term "PoE++" may not always correspond to IEEE 802.3bt. Confirm your PD device is IEEE 802.3bt compliant for proper operation.

2. Sadržaj paketa

Provjerite da li se u vašem paketu nalaze sve dolje navedene stavke. Ako neke stavke nedostaju ili su oštećene, obratite se svom prodavaču.

  • LINOVISION PoE Switch (POE-SW304G-4BT)
  • Adapter za napajanje
  • Uputstvo za upotrebu
Package contents of LINOVISION POE-SW304G-4BT PoE Switch

Image: Package contents including the PoE switch, power adapter, and user manual.

LINOVISION POE-SW304G-4BT PoE Switch with included accessories

Image: The LINOVISION POE-SW304G-4BT PoE Switch, power adapter, and user manual are shown together.

3. Proizvod je gotovview

Front Panel Interface:

Front panel interface of LINOVISION POE-SW304G-4BT PoE Switch

Image: Diagram illustrating the front panel of the PoE switch, highlighting the SFP Indicator, Link/ACT Indicator, PoE Indicator, Gigabit SFP Port, Power Indicator, 4x 90W Gigabit PoE Ports, Gigabit Uplink Port, and Extend Mode switch. Total PoE budget is 96W.

Interfejs zadnje ploče:

Rear panel interface of LINOVISION POE-SW304G-4BT PoE Switch

Image: The rear panel of the PoE switch, showing the ground terminal and the 100-240V AC input port.

4x BT 90W Ports:

Diagram of 4x BT 90W PoE ports and device compatibility

Image: Diagram showing the 4x BT 90W PoE ports providing power and data to PoE, PoE+, PoE++ devices, and data output to non-PoE devices. It highlights compatibility with IEEE 802.3af/at/bt PoE devices.

Full Gigabit Connectivity:

Diagram illustrating Full Gigabit speed of the PoE switch

Image: Diagram showing the PoE switch with an arrow indicating 1000Mbps data transfer speed across all ports, emphasizing full Gigabit transmission and the benefits of the SFP port for interference resistance and longer transmission.

4. Podešavanje

Raspakivanje:

Video: An unboxing video of the LINOVISION 4 Port Full Gigabit 802.3bt PoE++ Switch, showing the contents and initial appearance of the device.

Video: An unboxing video of the LINOVISION 8 Port BT 90W PoE Switch (POE-SW308G-4BT), which shares similar packaging and components with the 4-port model.

Plug and Play instalacija:

The LINOVISION PoE Switch is designed for simple plug-and-play operation, requiring no complex configuration.

  1. Priključite napajanje: Plug the included power adapter into the AC input port on the rear panel of the switch and then into a power outlet.
  2. Povežite uređaje: Connect your PoE-compatible devices (e.g., IP cameras, APs) to the PoE ports (P1-P4) using standard Ethernet cables. The switch will automatically detect and power these devices.
  3. Povežite se na mrežu: Connect the RJ45 uplink port or the SFP uplink port to your router or network backbone.
Plug-n-Play setup diagram for LINOVISION PoE Switch

Image: A diagram showing the simple plug-and-play process: plug in the power, connect the device to a PoE port, and the system is ready.

5. Uputstvo za upotrebu

PoE Extend Mode:

The PoE Extend Mode allows for extended cable distances for PoE devices. To enable this mode, locate the 'EXT/Default' switch on the front panel and set it to 'EXT'.

  • Zadani način rada: Standard PoE transmission up to 330ft (100m) at Gigabit speeds.
  • Prošireni način rada: Extends PoE + Data transmission up to 820ft (250m) at 10Mbps. This mode is ideal for IP cameras that typically consume less than 10Mbps bandwidth.
Diagram illustrating PoE Extend Mode for long-distance transmission

Image: Diagram showing the PoE Extend Mode, allowing for up to 820ft (250m) transmission at 10Mbps, compared to the traditional 330ft (100m).

PoE Safety Features:

The switch incorporates a standard PoE design with a 4-step power-up process to ensure safety for connected devices:

  1. PD Detection: Detects if a connected device is PoE-compatible.
  2. PoE Power Classification Negotiation: Negotiates the required power class with the device.
  3. Start Up: Initiates power delivery.
  4. Uključeno: Supplies the appropriate power to IEEE 802.3af/at/bt devices.

This process prevents overloading and ensures that power is not supplied to non-PoE devices, protecting them from potential damage.

Diagram illustrating PoE compatibility and safety process

Image: A graph showing the 4-step PoE power-up process (Detection, Classification, Start Up, Power ON) ensuring excellent compatibility and safety for PoE and non-PoE devices.

6. Održavanje

The LINOVISION PoE Switch is designed for durability and minimal maintenance.

  • čišćenje: Za čišćenje vanjštine uređaja koristite meku, suhu krpu. Ne koristite tekuća ili aerosolna sredstva za čišćenje.
  • ventilacija: Ensure the device is placed in a well-ventilated area. Although it features a fanless design, adequate airflow helps maintain optimal operating temperature.
  • Uslovi okoline: Operate the switch within the specified temperature range of -4°F to 131°F (-20°C to 55°C). The full metal enclosure and 6KV surge protection enhance its resilience in various environments.
Solid design features of LINOVISION PoE Switch

Image: Visual representation of the switch's solid design features, including wide temperature range support (-4°F to 131°F), fanless operation, IP40 full metal enclosure, and 6KV surge protection.

7. Otkrivanje problema

If you encounter issues with your LINOVISION PoE Switch, refer to the following common troubleshooting steps:

  • Nema napajanja: Ensure the power adapter is securely connected to both the switch and a working power outlet. Check the power indicator LED on the front panel.
  • Nema linka/aktivnosti: Verify that Ethernet cables are properly connected to both the switch and the connected device. Check the Link/ACT indicator LED for activity. Try a different cable or port.
  • PoE uređaj se ne uključuje:
    • Confirm the connected device is PoE-compatible (IEEE 802.3af/at/bt).
    • Check the PoE indicator LED for the specific port.
    • Ensure the total PoE budget of 96W is not exceeded by all connected devices.
    • If using a PoE++ device, confirm it is IEEE 802.3bt compliant, as some 'PoE++' devices may not fully adhere to this standard.
  • Slow Network Speed in Extend Mode: This is expected behavior. In PoE Extend Mode, the bandwidth is reduced to 10Mbps to achieve longer transmission distances (up to 820ft). If higher speeds are needed, ensure the cable length is within 330ft (100m) and the Extend Mode is disabled.

If the problem persists after following these steps, please contact LINOVISION technical support for further assistance.

8. Specifikacije

AtributVrijednost
Broj modelaPOE-SW304G-4BT
Dimenzije proizvoda202 mm x 140 mm x 44.5 mm
Težina artikla2.16 funti (1100 g)
Voltage48 Volts
Materijal kućištaMetal
Gornja temperatura131 stepena Fahrenheita (55°C)
Interface TypeRJ45, SFP
Brzina prijenosa podataka1000 Mbps (gigabit)
Broj portova6 (4 PoE++, 1 RJ45 Uplink, 1 SFP Uplink)
PoE standardIEEE 802.3af/at/bt
Ukupni PoE budžet96W
Maksimalna PoE snaga po portu90W (BT)
Zaštita od prenapona6KV

9. Garancija i podrška

LINOVISION products come with a standard warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official LINOVISION website. For technical support, troubleshooting assistance, or any product-related inquiries, please contact LINOVISION customer service or visit their support portal.

LINOVISION Store: Visit the LINOVISION Store on Amazon

Povezani dokumenti - POE-SW304G-4BT

Preview LINOVISION POE-SP02BTV Industrijski Gigabit 90W PoE++ Razdjelnik - Specifikacije i Karakteristike
Detaljne informacije o LINOVISION POE-SP02BTV, industrijskom gigabitnom 90W podesivom PoE++ razdjelniku. Karakteristike uključuju dvostruke DC izlaze, širok spektar...tagDomet, LED ekran i robustan dizajn za teške uslove rada. Uključuje specifikacije, detalje interfejsa i scenarije primjene.
Preview Linovision POE-SW508G2 Industrial Full Gigabit PoE Switch Quick Guide
Quick guide for the Linovision POE-SW508G2, an 8-port industrial full gigabit unmanaged PoE switch with 2 SFP uplinks and 4 BT 90W PoE ports. Includes installation, interface, and technical specifications.
Preview LINOVISION POE-SW308G-4BT 802.3bt PoE++ Switch User Manual and Specifications
Comprehensive user manual and technical specifications for the LINOVISION POE-SW308G-4BT 802.3bt PoE++ Switch, detailing product overview, important safeguards, operation guide, panel view, technical specifications, and warranty information.
Preview LINOVISION 90W Gigabit PoE Splitter POE-SP02BT-POE Quick Guide
Quick guide for the LINOVISION POE-SP02BT-POE 90W Gigabit PoE Splitter, detailing its features, installation, interface, application, and technical specifications for powering non-PoE devices.
Preview Linovision POE-SP30: 30W Wall Mount Gigabit PoE Splitter
Linovision POE-SP30 is a 30W wall-mount Gigabit PoE splitter that complies with IEEE 802.3af/at standards. It supports alternative A and B connections, offering a maximum power output of 30W. The device features a compact design, a wide input voltage range of 36Vdc to 57Vdc, and adjustable DC output options (5Vdc, 9Vdc, 12Vdc, 18Vdc). It includes essential protections like thermal cut-off and short circuit protection, along with LED indicators for power status. The splitter is plug-and-play and designed for Gigabit Ethernet environments.
Preview LINOVISION Industrijski 8-portni daljinski solarni PoE prekidač - Kratki vodič
Kratki vodič za LINOVISION POE-SWR608G-SOLAR, industrijski 8-portni daljinski solarni PoE prekidač. Ovaj dokument pokriva proizvod preko...view, package contents, installation, interface details, application scenarios, technical specifications, and configuration instructions.