1. Uvod
This user manual provides essential information for the safe and effective operation of your Monport 50W Fiber Laser Engraver, Model YXF50. This integrated mini fiber laser marking machine is designed for high-precision engraving and marking on various metal and non-metal materials. Please read this manual thoroughly before initial use to ensure proper setup, operation, and maintenance.
Figure 1.1: Monport 50W Fiber Laser Engraver, Model YXF50.
2. Sigurnosne informacije
WARNING: This is a Class 4 laser product. Direct exposure to the laser beam can cause severe eye and skin damage. Always follow safety precautions.
2.1 Opće sigurnosne smjernice
- Zaštita očiju: Always wear certified laser safety glasses appropriate for the laser's wavelength (1064nm) when the machine is in operation.
- Zaštita kože: Izbjegavajte direktno izlaganje kože laserskom snopu.
- ventilacija: Ensure adequate ventilation in the work area to remove fumes and particles generated during engraving. Consider a fume extractor.
- Protivpožarna sigurnost: Keep a fire extinguisher nearby. Do not engrave flammable materials without proper precautions.
- Nadzor: Nikada ne ostavljajte mašinu bez nadzora tokom rada.
- Ovlašteno osoblje: Samo obučeno i ovlašteno osoblje treba da rukuje laserskim graverom.
- Hitno zaustavljanje: Upoznajte se s lokacijom i radom dugmeta za hitno zaustavljanje.
2.2 Električna sigurnost
- Uverite se da je mašina pravilno uzemljena.
- Nemojte raditi mokrim rukama ili u damp uslovima.
- Isključite napajanje prije izvođenja bilo kakvog održavanja ili podešavanja.
3. Postavljanje i instalacija
The Monport 50W Fiber Laser Engraver is designed for straightforward setup. Follow these steps to prepare your machine for operation.
3.1 Raspakivanje i pregled
- Pažljivo izvadite sve komponente iz pakovanja.
- Inspect the machine for any signs of damage during transit. Report any damage to Monport support immediately.
- Verify all accessories listed in the packing list are present.
3.2 Montaža
The integrated design minimizes assembly. Typically, this involves securing the laser head column to the base unit.
- Place the base unit on a stable, level surface.
- Attach the vertical column with the laser head to the designated mounting points on the base. Secure it firmly using the provided screws.
- Connect any necessary cables (power, USB) as indicated in the quick start guide included with your machine.
Figure 3.1: Compact design and key specifications of the Monport 50W Fiber Laser Engraver.
3.3 Instalacija softvera
Your Monport 50W Fiber Laser Engraver is compatible with LightBurn and BSLcad software. Installation files and backup parameters are typically provided on a USB drive included in the packaging.
- Umetnite priloženi USB disk u računar.
- Follow the instructions on the USB drive to install your preferred software (LightBurn or BSLcad).
- Install the necessary drivers for the laser engraver to communicate with your computer.
- Configure the software according to the provided parameters for your specific machine model (YXF50).
4. Uputstvo za upotrebu
This section outlines the basic steps for operating your Monport 50W Fiber Laser Engraver.
4.1 Uključivanje i početne provjere
- Ensure all safety precautions are in place, including wearing laser safety glasses.
- Connect the power cable and turn on the main power switch on the machine.
- Launch the engraving software (LightBurn or BSLcad) on your computer.
- Verify that the software recognizes the laser engraver.
4.2 Postavljanje materijala i fokusiranje
- Place your material on the work platform.
- Adjust the Z-axis (height of the laser head) until the laser is properly focused on the material surface. The machine features a red dot pointer to assist with focusing and positioning.
- Važno: Remember to remove the lens cap before operation.
Figure 4.1: Optimal marking area of 150x150mm for the 50W fiber laser.
4.3 Software Operation and Engraving
- Uvezite ili kreirajte svoj dizajn unutar softvera.
- Set engraving parameters such as power, speed (up to 10000mm/s), frequency, and passes based on the material and desired effect.
- Use the software's framing function to preview the engraving area on your material.
- Initiate the engraving process. Monitor the machine closely during operation.
Slika 4.2: Gotovoview of key features including 10000mm/s speed and 50W power.
Figure 4.3: Illustration of the 0.01mm ultra-fine spot precision.
4.4 Kompatibilni materijali
The Monport 50W Fiber Laser Engraver is suitable for marking and engraving a wide range of materials:
- metali: Gold, Silver, Copper, Stainless Steel, Brass, Titanium, Aluminum, Platinum, etc.
- plastike: Certain types of plastics.
- ostalo: Some ceramics, leather, painted metals.
Slika 4.4: Pramples of materials compatible with the fiber laser engraver.
5. Održavanje
Regular maintenance ensures optimal performance and extends the lifespan of your Monport 50W Fiber Laser Engraver.
5.1 Čišćenje objektiva
The F-theta field lens is a critical component. Keep it clean to maintain engraving quality.
- Učestalost: Clean the lens regularly, especially if you notice a decrease in engraving quality or power.
- Procedura: Use a specialized lens cleaning solution and lint-free wipes. Avoid touching the lens surface with bare hands.
5.2 Generalno čišćenje
- Keep the work area and the machine's exterior free of dust and debris.
- Ensure ventilation grilles are not obstructed.
5.3 Ažuriranja softvera
Periodically check for software updates for LightBurn or BSLcad to benefit from new features and performance improvements.
6. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti i nudi moguća rješenja.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema laserskog izlaza | Lens cap still on, emergency stop engaged, power issue, software not connected. | Remove lens cap, disengage emergency stop, check power connections, verify software connection. |
| Loš kvalitet graviranja | Incorrect focus, dirty lens, incorrect power/speed settings, material not suitable. | Adjust focus, clean lens, optimize engraving parameters, ensure material compatibility. |
| Machine not recognized by software | USB cable issue, driver not installed, software configuration error. | Check USB cable, reinstall drivers, verify software settings. |
| Red dot pointer not visible | Pointer disabled in software, hardware malfunction. | Enable pointer in software settings. If issue persists, contact support. |
7. Specifikacije
Key technical specifications for the Monport 50W Fiber Laser Engraver (Model YXF50):
- Model: YXF50
- Vrsta lasera: Fiber Laser
- Snaga lasera: 50W (50000 mW output power)
- klasa lasera: Klasa 4
- Max. Brzina označavanja: 10000 mm/s
- Preciznost graviranja: 0.01mm
- Radna oblast: 150 mm x 150 mm (5.9" x 5.9")
- Max Z-Height: 350mm
- Životni vijek: Do 100,000 sati
- Kompatibilni softver: LightBurn, BSLcad
- Kompatibilni operativni sistemi: Windows, macOS
- Težina proizvoda: 14.5 kg (34 lbs)
- Materijal: Aluminijum
- Boja: Grey
- Način rada: Manual
Figure 7.1: Speed capabilities of the Monport 50W Fiber Laser Engraver.
8. Garancija i podrška
8.1 Informacije o garanciji
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Monport webSačuvajte dokaz o kupovini za slučaj reklamacije.
8.2 Korisnička podrška
If you encounter any issues not covered in this manual or require technical assistance, please contact Monport customer support. You can find contact information on the official Monport webweb-stranice ili putem vaše platforme za kupovinu.
Monport Direct: Informacije o prodavcu
Figure 8.1: Optional accessories for enhanced functionality and safety.
